Swissmade
NEWS
25/06/2020
CORPORATE

Z43 Goes Carbon Dioxide-Free

As part of our effort to help create a sustainable and healthier future, energy at Z43 is now 100% renewable, which will lead to a reduction in CO2 emissions of more than 60,000 m3 per year – corresponding to about twenty times the CO2 footprint of the average Swiss.

For the past 20 years, we have produced the heating energy for the Z43 headquarters in Zurich – home to the IT’IS Foundation, Schmid & Partner Engineering AG, and ZMT Zurich MedTech AG – as well as supplied adjacent residential buildings with more than 79 apartments with natural gas. Our labs, on the other hand, were cooled via a small heat pump powered by electricity. Though gas is “cleaner” than oil or coal, we strongly felt that it was time to switch from fossil fuels to renewable sources of power in order to run our work lives more sustainably.

niels roof panels web

niels basement heating web

So we finally got rid of the gas burners in our basement and invested heavily in a new energy system. The newly installed 500 kW heat pump now heats and cools the various buildings by exchanging heat with the groundwater stream that runs 30 m below our premises. In addition, because our labs and servers produce more heating energy than we can use during the summer, we replaced the warm-water panels on the roof with photovoltaic cells to generate our electric power. We also took care to only subscribe to companies that exclusively generate electricity by hydro, wind, and solar power. This complements our internal policy that Z43 staff should only commute by car to work in exceptional circumstances (e.g., it was appropriate to do so during the COVID-19 pandemic).

We are proud that we have started to generate our own energy and have become largely CO2-free at Z43.

Curious how it looks? Check out our CO2-free energy production by clicking on the leaf:

leaf slogan mm3

The leaf can also be found in the header of any of our webpages: IT’IS Foundation, SPEAG, ZMT, and Zurich43.

Z43 – Think Renewable!

MEASUREMENT

23/02/2015

Contact
info@speag.swiss

 

 
MEASUREMENT

15/02/2015

Contact
info@speag.swiss

 

Progress for IEC 62209-3 Standard in San Francisco

Significant progress at recent IEC 62209-3 meeting in San Francisco resulted in agreement on broad acceptance of vector array systems such as cSAR3D, and rigorous protocols for validation and uncertainty.

 
MEASUREMENT

16/01/2015

Contact
info@speag.swiss

 

cSAR3D Quad Release

cSAR3D Quad is ideal for fast and accurate SAR testing of laptops, tablets and other large devices. In November and December 2014, several cSAR3D Quad systems were shipped and installed at customer sites, with many more scheduled to ship in early 2015. SPEAG is very pleased with the popularity and initial demand for cSAR3D Quad among our customers. 

 
CORPORATE

31/12/2014

Contact
info@speag.swiss

 

Successful SPEAG exhibtions and workshops during 2013

SPEAG successfully participated on multiple international conferences and exhibitions during 2013.

 
CORPORATE

25/11/2014

Contact
info@speag.swiss

 

20 Years SPEAG & 15 Years IT'IS

The red carpet was rolled out at the Volkshaus at Helvetiaplatz on the evening of Friday, November 21st to welcome attendees of the jubilee party to celebrate the 20th anniversary of SPEAG and the 15th anniversary of the IT’IS Foundation.

 
SIMULATION

24/11/2014

Contact
semx-support@speag.swiss

 

SEMCAD X @ IEEE International Symposium on Telecommunication Technologies 2014

A tutorial course abut Antenna design for Small MIMO Terminals featuring SEMCAD X was held in Malaysia.

 
SIMULATION

18/11/2014

Contact
semx-support@speag.swiss

 

SEMCAD X Matterhorn Final Release

SPEAG is pleased to announce the final release of SEMCAD X Matterhorn V15.0. Over the past three years, a complete overhaul of the previous version of SEMCAD X was undertaken, including improvements to all of its industry leading features; the replacement of inefficient and uncompetitive components; and the creation of the most modern user interface.

 
CORPORATE

17/11/2014

Contact
info@speag.swiss

 

Spectacular Applied Research (SAR) – 2014 National Future Day

Thursday, November 13 was 2014 Future Day at Z43, and eleven curious and enthousiastic young adults spent a day visiting our team at IT’IS, SPEAG, and ZMT laboratories.

 
MEASUREMENT

15/11/2014

Contact
info@speag.swiss

 

Special Discount for iSAR to cSAR3D

We are pleased to offer an attractive discount for the upgrade of iSAR to cSAR3D. cSAR3D meets the advancing needs of customers for fast and high-precision SAR testing. 

 
MEASUREMENT

28/10/2014

Contact
info@speag.swiss

 

ICEy (Interference & Compatibility Evaluation System) Release

SPEAG is excited to announce the introduction of our novel ICEy Interference & Compatibility Evaluation system, another decisive leap forward in EMC/EMI near-field scanning technology.

 
Page 16 of 28