Swissmade
NEWS
Jul 26, 2022
MEASUREMENT

DASY8-3D – cSAR3D-A Redesigned

SPEAG proudly presents DASY83D, an effective and modular combination of DASY8 and cSAR3D that retains all the benefits of the DASY8 Modules and cSAR3D and enables versatile and precise automated testing.

In 2018, SPEAG released cSAR3D-A, our first system for automated specific absorption rate (SAR) testing, which was loved by our customers, but proved not to be modular and versatile enough to quickly adopt to the testing needs created by new exposure control features combining time-averaged SAR, proximity and motion sensors.

SPEAG did not shy away from the major effort of starting from scratch, and completely redesigned the cSAR3D-A system using all the technologies developed in-house in the meantime, such as the modularity of the DASY8 Modules and our Jupyter Notebook-based solutions. The focus was on maximizing precision and providing an easy-to-use user interface that allows user-defined testing protocols. 

The result is DASY83D.

DASY83D is modular in hardware and software – any DASY8 and cSAR3D system can be upgraded to DASY83D. The software is based on the new DASY8 Module c3D V1.0 and the Jupyter Notebook DASY83D, and interacts with cSAR3D via its advanced application programming interfaces. The first version of the DASY83D software is still limited, but already has several important test functionalities and features:

  • Precision of device positioning on the cSAR3D phantoms of 0.1 mm and 0.1º;

  • Speed through automation without compromising measurement accuracy;

  • Reduced operator errors;

  • Accurate evaluation of SAR distance and position dependence, including proximity sensors.

In the coming months, SPEAG will add many new features, and focus on smart and smooth integration of different base station simulators.

For further information, please contact us at info@speag.swiss or via any of our sales channels.

 

SIMULATION

Jul 18, 2016

Contact
semx-support@speag.swiss

 

SEMCAD X Matterhorn V16-0 Released

The SEMCAD X Team is pleased to announce the release of SEMCAD X Matterhorn V16-0, an update of SEMCAD X Matterhorn  V15.6.

 
MEASUREMENT

Jul 13, 2016

Contact
info@speag.swiss

 

cSAR3D V2.6 Release - Faster Automation

Our new cSAR3D software release 2.6 features a further improved reconstruction algorithm, more precise determination of the peak spatial SAR close to the border of the sensor array, and faster and more reliable handovers of 2G, 3G and 4G signals. We are also pleased to announce that this quarter we are releasing both automated testing of devices with dynamic antenna tuners and autonomous DUT positioning based on DASY robots with integrated camera and device charger. 

 
MEASUREMENT

Jul 1, 2016

Contact
info@speag.swiss

 

ISO/IEC 17025 Accreditation for Calibration

ISO/IEC 17025 Accreditation for Calibration of probes & validation sources extended down ot 4 MHz and Calibration of dielectric materials awarded

 
MEASUREMENT

Mar 31, 2016

Contact
info@speag.swiss

 

DASY Measurement Protocol for Capacitively Coupled SAR Distribution

SPEAG recommends an updated measurement protocols for compliance testing with DASY52 to account for new technology trends and regulator requirements. cDASY6 will have a more advanced automated approach.

 
MEASUREMENT

Mar 21, 2016

Contact
info@speag.swiss

 

Chinese OTA Hand Phantoms

Release of the first Chinese OTA hand phantom developed in collaboration with HWA-Tech for the Chinese Academy of Broadcasting Planning (ABP).

 
CORPORATE

Mar 11, 2016

Contact
info@speag.swiss

 

SPEAG Fast SAR Solutions Featured at MIC MRA Workshop in Tokyo

The performance of SPEAG’s products for fast measurement of specific absorption rate (SAR) – DASY6 and cSAR3D – were featured in a presentation by Prof. Niels Kuster at the MIC MRA International Workshop held March 2 – 3, 2016 in Tokyo hosted by the Japanese Ministry of Internal Affairs and Communications.

 
SIMULATION

Mar 8, 2016

Contact
semx-support@speag.swiss

 

SEMCAD Matterhorn V15.6.3 Update Release

The SEMCAD X Team is pleased to announce the release of SEMCAD Matterhorn V15.6.3, an updated version of SEMCAD Matterhorn  V15.6.

 
MEASUREMENT

Feb 23, 2016

Contact
info@speag.swiss

 

Still Groovin’ to the E-Field Probe Blues by Prof. Howard Bassen

The first paper to describe the design and fabrication of a miniature broad-band electric field probe was published more than 40 years ago in the Annals of the New York Academy of Sciences, Biological Effects of Nonionizing Radiation.

 
MEASUREMENT

Feb 10, 2016

Contact
info@speag.swiss

 

Anritsu MT8820C Integrates with DASY6 and cSAR3D

Anritsu Corporation’s MT8820C Radio Communication Analyzer now integrates with both DASY6 and cSAR3D from Schmid & Partner Engineering AG (SPEAG) to provide seamless Specific Absorption Rate (SAR) compliance testing that significantly reduces assessment costs and maximizes flexibility.

 
MEASUREMENT

Feb 6, 2016

Contact
info@speag.swiss

 

Notice: Limited warranty on phantoms

Important notice to avoid shell degradation of SPEAG phantoms due to exposure to aggressive liquids.

 
Page 16 of 32