Swissmade
NEWS
02/09/2021
MEASUREMENT

New API for MAGPy V1.0

Simple and powerful: The new application programming interface of MAGPy V1.0 allows the programming and easy integration in customer-specific applications in complex environments.

With the new application programming interface (API) of SPEAG’s Magnetic Amplitude and Gradient Probe System (MAGPy) V1.0, only a few lines of codes are required to enable:

  • complex scanning with a robot, e.g., below a car or inside the car  
  • remote or long-term monitoring of field levels
  • monitoring in high field strength or hazardous environments
  • applications where the field is to be measured at several peak frequencies under automated control


The MAGPy-API is available in the MAGPy 1.0 Desktop application from version 1.0.36.

Further information about MAGPy V1.0 can be found here.

Contact info@speag.swiss or any of our sales channels to request an upgrade, for further information, or to receive a quotation.


MEASUREMENT

25/08/2010

Contact
info@speag.swiss

 

August 24-25 Installation of DASY52NEO at NIM Beijing

August 24-25 Installation of DASY52NEO at NIM Beijing

 
MEASUREMENT

24/08/2010

Contact
info@speag.swiss

 

iSAR² V2.2 Software Release

We have released iSAR² software version 2.2. New features include remote control of the iSAR² using customer-specific programs, enhanced graphical information of the iSAR² operation, and full compatibility with Windows 7 and Windows XP in 32-bit and 64-bit versions.

 
SIMULATION

10/08/2010

Contact
semx-support@speag.swiss

 

SEMCAD X v14.2.3 Release

The SEMCAD X Team is pleased to announce the release of SEMCAD X v14.2.3, an update of SEMCAD X Aletsch v14.2.

 
MEASUREMENT

17/07/2010

Contact
info@speag.swiss

 

New Product: DC/ELF Magnet Field Probe (DASY52NEO Compatible)

SPEAG started to integrate 3rd-Party Probes for our DASY52 NEO systems. The first probes are the 3-axis hall field probe series from MetroLab that enpower DASY52NEO to scan DC/ELF magnetic fields with high precision. 

 
MEASUREMENT

16/07/2010

Contact
info@speag.swiss

 

New Product: MEM (Membran) Phantom

The new MEM Phantom was desgined and optimized for compliance testing of wireless devices and other electromagnetic emmitting devices that may be partially surrounded by tissue or in direct contact with the skin, e.g., wireless hands-free kits, hearing aids, skin mounted devices, inductive activators, etc.  

 
SIMULATION

14/07/2010

Contact
semx-support@speag.swiss

 

SEMCAD X Workshop Raffle Winner

At the end of the SEMCAD X User Meeting & Workshop at APS/URSI 2010, a NVIDIA Tesla C1060 card & Acceleware Token license was given away in a raffle.

 
MEASUREMENT

13/05/2010

Contact
info@speag.swiss

 

New Product: CRANE for iSAR²

SPEAG is introducing the CRANE for iSAR². CRANE enables testing of wireless devices on the iSAR² Flat or Head with headsets or data cables attached.

 
MEASUREMENT

06/05/2010

Contact
info@speag.swiss

 

New Product: Broad-Band Liquids for new IEC/IEEE standards

SPEAG introduces a new series of tissue simulating liquids that are broad-band based on the environmental friendlier Tween ingredient and fully compliant with the new IEC/IEEE standards allowing ±10% tolerance on the liquid parameters.

 
SIMULATION

04/05/2010

Contact
semx-support@speag.swiss

 

NRC, with SPEAG, offers a unique software platform for MRI system design

The National Research Council Institute for Biodiagnostics (NRC-IBD) has teamed up with SPEAG to offer a unique software platform for magnetic resonance imaging (MRI) scanner design. The new platform seamlessly integrates powerful new tools for radiofrequency (RF) array design and post-processing and is the first software of its kind to combine all the tools needed to design RF-phased arrays into a single user friendly program.

 
MEASUREMENT

06/03/2010

Contact
support@speag.swiss

 

New Product: PRE - 10

This new product PRE - 10 is a 3 channel voltage divider which extends the operation of existing SPEAG probes for use in very high fields (> 5 kV/m; > 10 kW/kg). It is compatible with all our E-Field, H-field and SAR probes.

 
Page 28 of 30
 
 
Latest News