Swissmade
NEWS
May 17, 2022
MEASUREMENT

DASY8/6 Module HAC V1.2: Packed with New Features

Simplified procedures, additional viewer options, and more: SPEAG has further improved the user experience when testing compatibility with DASY8/6 Module HAC V1.2 between a wireless device and hearing aids according to ANSI C63.19-2019.

After the successful launch of the first version of our hearing aid compatibility module, DASY8/6 Module HAC V1.0, in November 2021, SPEAG has further improved the features and workflow of the module based on valuable customer feedback. Streamlined procedures and improved visualizations now make it easier and smoother to demonstrate compliance with ANSI C63.19-2019.

Compatibility with Windows 10/1

Module HAC V1.2 supports the latest hardware revision of the Audio Magnetic Measurement Instrument (AMMI). Based on the Roland Rubix22 USB audio interface, it is fully compatible with Windows 10/11.

Simplified Procedure

In Module HAC V1.2, the hearing aid compatibility test arch position and probe calibration results are persistent. It is no longer necessary to import them after restarting the Jupyter notebook – the last used values are automatically restored.

AngleCalibration

System response during probe angle determination

 

Automated Calculation of Codec / System Delay

The audio signal emitted by the wireless device under test may be delayed due to the codec latency. In Module HAC V1.2, this parameter no longer needs to be evaluated manually: it is now determined automatically in post-processing.

Additional Viewer Options

The field viewer comes with many new features: for example, users can now edit the color bar range and export all displayed data. In addition, the spectrally weighted undesired magnetic noise can now be visualized.

FieldViewer

H-field distribution for a Telephone Magnetic Field Simulator (TMFS) measured in transverse orientation. The color bar range is editable

 

Intuitive Communication System User Interface

The communication system selection has also been further improved: the layout is more user-friendly and the most frequently used test channels (low/middle/high) are more prominently highlighted.

CommunicationSystems

Selection of the communication system to be measured

 

Improved Post-Processing of Undesired Audio Band Magnetic Field

The post-processing algorithm for evaluating the undesired magnetic field in the audio band has been improved to avoid overestimation of when low-frequency components dominate.

 

DASY8/6 Module HAC V1.2, together with the updated manuals, can be downloaded here.

Your feedback helps us to constantly improve our products and services. If you have thoughts and suggestions, please reach out to us at support@speag.swiss.

For further information on DASY8/6 Module HAC V1.2 or any of our other products, please contact us at info@speag.swiss or via any of our sales channels.

 

MEASUREMENT

Mar 16, 2015

Contact
info@speag.swiss

 

cSAR3D V2.0 Release

The innovation continues with SPEAG's release of cSAR3D V2.0. This release fully integrates all cSAR3D phantom types: Flat, Left Head, Right Head and Quad. Shipments of cSAR3D Quad started in November 2014 and have far exceeded our expectations. SAR measurement of simultaneous transmisson is supported, as is base station simulator automation with both CMU200 and CMW500 from Rohde & Schwarz.

 
MEASUREMENT

Feb 23, 2015

Contact
info@speag.swiss

 

 
MEASUREMENT

Feb 15, 2015

Contact
info@speag.swiss

 

Progress for IEC 62209-3 Standard in San Francisco

Significant progress at recent IEC 62209-3 meeting in San Francisco resulted in agreement on broad acceptance of vector array systems such as cSAR3D, and rigorous protocols for validation and uncertainty.

 
MEASUREMENT

Jan 16, 2015

Contact
info@speag.swiss

 

cSAR3D Quad Release

cSAR3D Quad is ideal for fast and accurate SAR testing of laptops, tablets and other large devices. In November and December 2014, several cSAR3D Quad systems were shipped and installed at customer sites, with many more scheduled to ship in early 2015. SPEAG is very pleased with the popularity and initial demand for cSAR3D Quad among our customers. 

 
CORPORATE

Dec 31, 2014

Contact
info@speag.swiss

 

Successful SPEAG exhibtions and workshops during 2013

SPEAG successfully participated on multiple international conferences and exhibitions during 2013.

 
CORPORATE

Nov 25, 2014

Contact
info@speag.swiss

 

20 Years SPEAG & 15 Years IT'IS

The red carpet was rolled out at the Volkshaus at Helvetiaplatz on the evening of Friday, November 21st to welcome attendees of the jubilee party to celebrate the 20th anniversary of SPEAG and the 15th anniversary of the IT’IS Foundation.

 
SIMULATION

Nov 24, 2014

Contact
semx-support@speag.swiss

 

SEMCAD X @ IEEE International Symposium on Telecommunication Technologies 2014

A tutorial course abut Antenna design for Small MIMO Terminals featuring SEMCAD X was held in Malaysia.

 
SIMULATION

Nov 18, 2014

Contact
semx-support@speag.swiss

 

SEMCAD X Matterhorn Final Release

SPEAG is pleased to announce the final release of SEMCAD X Matterhorn V15.0. Over the past three years, a complete overhaul of the previous version of SEMCAD X was undertaken, including improvements to all of its industry leading features; the replacement of inefficient and uncompetitive components; and the creation of the most modern user interface.

 
CORPORATE

Nov 17, 2014

Contact
info@speag.swiss

 

Spectacular Applied Research (SAR) – 2014 National Future Day

Thursday, November 13 was 2014 Future Day at Z43, and eleven curious and enthousiastic young adults spent a day visiting our team at IT’IS, SPEAG, and ZMT laboratories.

 
MEASUREMENT

Nov 15, 2014

Contact
info@speag.swiss

 

Special Discount for iSAR to cSAR3D

We are pleased to offer an attractive discount for the upgrade of iSAR to cSAR3D. cSAR3D meets the advancing needs of customers for fast and high-precision SAR testing. 

 
Page 19 of 32
 
 
Latest News