DASY8/6 Module WPT V2.0: Enhanced and Fast WPT Compliance Testing
SPEAG released DASY8/6 Module WPT V2.0, which integrates the new MAGPy Version 2 with the DASY8/6 system and provides 8-times faster, more accurate, and total field (magnetic and electric field) compliance testing of sources emitting any periodic signals (<10 MHz) against the basic restrictions.
The latest version of our DASY8/6 Module WPT, V2.0, is now based on MAGPy Version 2 and takes full advantage of this stand-alone product. Evaluating wireless power transfer (WPT) systems has never been so quick and easy with maximum precision:
8× faster measurements, as the new probes allow assessment of the eight isotropic magnetic (H-)field probes (23 sensors plus phase) at each robot position;
Simultaneous measurement of the incident electric (E-)field with its integrated isotropic E-field sensor;
Evaluation of periodic signals with non-sinusoidal waveforms and duty cycles;
Evaluation of all basic restriction quantities, now also including the local non-averaged induced E-field required by ISED;
Conversion of the measured H-field distribution into a Maxwell field and calculation of the fields in the standardized phantom without loss of precision (Tier 4 of IEC 63184);
This user video shows how the MAGPy Version 2 probe, integrated with DASY8/6 Module WPT V2.0, is used to determine compliance for wireless power transfer devices.
Another important advantage is the dual use of the MAGPy system as a hand-held system (MAGPy Version 2) and as part of Module WPT (DASY8/6 Module WPT V2.0), as customers only need to buy and calibrate one device.
If you have any suggestions or would like to receive further information, please contact us at firstname.lastname@example.org.
DYMSTEC, SPEAG, and ZMT Zurich MedTech AG (ZMT) conducted their annual hardware and software workshop in South Korea on 6-7 September, 2018. Z43's sales channel for South Korea were the excellent local organizers of the event, which featured several presentations, workshops, and social events and included live English-Korean translation service.
We are pleased to announce the release of DAK software version 188.8.131.52. Based on the valuable feedback from our rapidly growing customer base, this important maintenance release further improves the accuracy, repeatability, and user experience of measurements with our DAK product line.
SPEAG's President of the Board Niels Kuster presented keynote lectures on “EM Evaluation and Optimization of IoT Systems: Standards, Software and Instrumentations” and “Workflow for Demonstration of Compliance of Transmitters Operating above 10 GHz” at a symposium on IoT co-organized by the AUDEN Group and the IEEE EMC Chapter in Taipei on July 4, 2018.