Swissmade
NEWS
29/07/2020
MEASUREMENT

mmWave ½SAM Phantoms Extend OTA Testing in CATR for 5G FR2 Devices

SPEAG’s two new mmWave ½SAM phantoms are optimized for testing mobile phone and other ear-mounted devices in talk mode at frequencies from 6 to >100 GHz and meet the quiet zone and weight restrictions of mmWave CATR and OTA chambers.

With the release of the new mmWave ½SAM right and left head phantoms, SPEAG is extending the frequency coverage from <0.3 – 6 GHz to 0.3 – >100 GHz, thus allowing its customers to perform reliable and repeatable over-the-air (OTA) performance evaluations of devices including 5G New Radio Frequency Range 2 and any other mmWave wireless operating systems. The mmW-½SAMR/L-V11 packages consist of the right or left head phantom, the mounting structure, a 6-degree positioning mask, and our universal talk-mode fixtures compatible with all of our talk-mode hands. Each package:

  • is fully compliant with the target values of current and future CTIA test plans and the reflection properties of the human skin for frequencies >100 GHz;
  • is optimized for use in compact antenna test ranges (CATR) or other chambers for OTA evaluations with a 30 cm quiet zone or larger;
  • has a half-head geometry compliant with SAM data as defined by IEEE, 3GPP, and CTIA and is available for right and left-hand usage, whereas the deviation to the full SAM head phantom is <0.2 dB for frequencies >6 GHz;
  • is light weight with only 2.5 kg.

The new mmW-½SAMR/L-V11 phantom packages are an advanced solution for passive and active OTA testing from 6 to >100 GHz.

To receive a quotation or for further information, please contact us at info@speag.swiss.

MEASUREMENT

14/04/2011

Contact
info@speag.swiss

 

iSAR Quad pre-release

iSAR Quad is the largest and highest-resolution iSAR available. iSAR Quad is capable of scanning a 600 mm x 400 mm planar area with a 1 mm resolution, making it well suited for scanning laptops, tablet computers and other large devices. 

 
SIMULATION

31/03/2011

Contact
semx-support@speag.swiss

 

SEMCAD X Light v14.4.4 Release

The SEMCAD X Team is pleased to announce the release of SEMCAD X Light V14.4.4, a limited version of SEMCAD X v14.4.3 Aletsch.

 
SIMULATION

28/03/2011

Contact
semx-support@speag.swiss

 

SEMCAD X Workshop Series 2011 in China/Taiwan

The SEMCAD X Team is pleased to announce the dates for the SEMCAD X Workshop Series in China and Taiwan for 2011

 
MEASUREMENT

15/03/2011

Contact
info@speag.swiss

 

Golden Validation Device

The Golden Validation Device is a very stable, reliable and easy-to-use calibrated reference source for SAR and OTA measurements. It is a stand-alone device that can be used anywhere without connection to a network. The antenna is well-matched under different loading conditions to provide a reliable output.

 
SIMULATION

10/02/2011

Contact
semx-support@speag.swiss

 

SEMCAD X v14.4.3 Release

The SEMCAD X Team is pleased to announce the release of SEMCAD X v14.4.3, an update of SEMCAD X Aletsch v14.4.

 
SIMULATION

25/01/2011

Contact
semx-support@speag.swiss

 

Three Papers Selected as Highlights of 2010 by the Journal Physics in Medicine and Biology Relied on SPEAG's Advanced Products SEMCAD X & DASY52 NEO

Three papers relying on SPEAG's products in the execution of their studies were among the 30 articles selected by the journal Physics in Medicine and Biology as the Highlights of 2010

 
MEASUREMENT

17/01/2011

Contact
info@speag.swiss

 

iSAR² V2.3 Software Release

Fast SAR measurements are now faster than ever (less than one second).  Also, combined SAR evaluation of simultaneous transmitters and new flexibility for comparison of iSAR² measurements with DASY or other iSAR² measurements have been introduced. This further cuts the time spent on quality assurance, prototype evaluation and pre-compliance testing of wireless devices.

 
SIMULATION

02/01/2011

Contact
semx-support@speag.swiss

 

Exhibitions and Workshops 2011

SPEAG will be exhibiting at the following conferences and exhibitions this year. If you would like to arrange a demo or meeting, or are interested in attending a technical workshop, please send an email to semx-support@speag.swiss.

 
MEASUREMENT

31/12/2010

Contact
info@speag.swiss

 

DASY52 Software Release V52.6

We are pleased to announce a new release of DASY52. This release not only resolves reported bugs, but also incorporates important new features that result in reduced measurement time, more flexibility and implementation of new measurement protocols arising from the IEC/IEEE standardization committees. Furthermore, many features have been added for the DASY52NEO users.

 
MEASUREMENT

26/11/2010

Contact
info@speag.swiss

 

iSAR Discounts & Packages

Due to the popularity of our iSAR² systems and the expanding choices of accessories and calibrations, SPEAG announces new discounts and packages for iSAR². This includes discounts on systems and accessories, calibration packages and a special package with SEMCAD X ANTENNA.

 
Page 25 of 29
 
 
Latest News