Swissmade
NEWS
10/11/2020
MEASUREMENT

Use of DASY6 for Devices Operating at 6 – 10 GHz

SPEAG’s latest Application Note provides guidance on how to best meet FCC’s
U-NII 6–7 GHz Interim Procedures.

With the opening of the Unlicensed National Information Infrastructure (U-NII) bands above 6 GHz, procedures for power density (PD) compliance testing in the reactive near-field are urgently needed.

FCC U NII6 8 

Measuring closer than λ/5 from the source is a challenge for any compliance testing method. At the last TCB workshop on October 14, 2020, the Federal Communications Commission (FCC) presented its new interim procedures for radiofrequency exposure evaluations of U-NII 6–7 GHz band portable devices. SPEAG lost no time and has already developed the corresponding measurement guidelines to empower DASY6 users to meet these FCC requirements. Our new Application Note “Interim Procedures for Devices Operating at 6 – 10 GHz” lays out in detail how to determine:

  • the absorbed PD with cDASY6 Module SAR V6.14+ and
  • the incident PD with cDASY6 Module mmWave V2.0+

The workflow will be further simplified and the assessment accuracy will be further improved with the release of Module mmWave V3.0 that is scheduled for 2Q2021.

 

CORPORATE

31/10/2017

Contact
info@speag.swiss

 

Annual SPEAG / ZMT Hardware and Software Workshop in South Korea: A Great Success!

SPEAG and ZMT Zurich MedTech AG (ZMT) held their annual South Korea Hardware and Software Workshop at the Gachon Convention Center in Sungnam-si, Gyeonggi-do, South Korea on 27 October 2017. Approximately 180 engineers and scientists from leading companies, universities, and government institutions of South Korea attended the event, which, as always, was a great success.

 
MEASUREMENT

31/10/2017

Contact
info@speag.swiss

 

cSAR3D: The Only Vector SAR System to Fully Meet the Demanding Requirements of IEC 62209-3

Recent tests from independent laboratories have shown that cSAR3D meets the stringent requirements of draft IEC 62209-3. All evaluated cSAR3D systems pass the validation protocol.

 
MEASUREMENT

24/10/2017

Contact
info@speag.swiss

 

The first FCC-type certification of a 60 GHz WiGig module granted on the basis of assessment with SPEAG’s unique 5G test system

The FCC has recently granted the first RF exposure type approval for a WiGig embedded wireless communication module. Compliance with FCC limits was demonstrated with SPEAG’s 5G solution.

 
MEASUREMENT

17/10/2017

Contact
info@speag.swiss

 

System Check and Validation Sources for 5G Now Available from 10 – 110 GHz

Last milestone in instrumentation for smooth 5G certification achieved.

 
CORPORATE

11/10/2017

Contact
info@speag.swiss

 

SPEAG Sponsors Awards at 2nd International Workshop on Photonics Applied to Electromagnetic Measurements (PEM2017)

Schmid & Partner Engineering AG (SPEAG) sponsored the awards at the 2nd International Workshop on Photonics Applied to Electromagnetic Measurements (PEM2017), hosted by the IT'IS Foundation and held at the Volkshaus in Zurich, Switzerland on October 5 – 6, 2017. The PEM workshops are devoted to the research, development, and application of photonics in electromagnetic measurements and closely related fields, such as fiber-optic signal transmission, photonic signal processing, display integrated antennas, and photonic device technology.

 
MEASUREMENT

26/09/2017

Contact
info@speag.swiss

 

Release of ICEy-mmW Module V1.0

SPEAG is proud to announce the ICEy-mmW Module Release V1.0, featuring highly automated, contactless testing of power density compliance of 5G and WiGig devices with micrometer precision.

 
CORPORATE

22/09/2017

Contact
info@speag.swiss

 

SPEAG and ZMT Workshop in South Korea on 27 October 2017

Schmid & Partner Engineering AG (SPEAG) and ZMT Zurich MedTech AG (ZMT) are pleased to announce their annual hardware and software workshop, to be held in Seoul, South Korea, on 27 October 2017. Our in-house experts, together with our partners from Dymstec, will demonstrate SPEAG's and ZMT's latest innovations and product updates and provide information about standards trends and our roadmap for addressing emerging industry needs.

 
MEASUREMENT

29/08/2017

Contact
info@speag.swiss

 

New 106/410/DPAS published for vector measurement-based SAR testing systems (frequency range 30 MHz – 6 GHz)

A DPAS (Draft Publicly Available Specification) of Part 3 of the IEC standard 62209, which will allow the use of standardized fixed sensor array systems in addition to robot-based scanning systems, has been submitted for IEC approval.

 
MEASUREMENT

24/08/2017

Contact
info@speag.swiss

 

IT'IS at ICES TC95 Meeting in Rosslyn, VA, 14-16 Aug 2017

In August 2017, the International Committee on Electromagnetic Safety (ICES) Technical Committee 95 held their bi-annual meeting in Rosslyn, VA, to update electromagnetic exposure standards.

 
MEASUREMENT

08/08/2017

Contact
info@speag.swiss

 

cDASY6 5G Module Release V1.0

SPEAG is proud to announce cDASY6 5G Module Release V1.0, featuring reduced scan time, automated evaluation of several planes, and a simplified user-interface.

 
Page 9 of 29