Swissmade
NEWS
May 17, 2022
MEASUREMENT

DASY8/6 Module HAC V1.2: Packed with New Features

Simplified procedures, additional viewer options, and more: SPEAG has further improved the user experience when testing compatibility with DASY8/6 Module HAC V1.2 between a wireless device and hearing aids according to ANSI C63.19-2019.

After the successful launch of the first version of our hearing aid compatibility module, DASY8/6 Module HAC V1.0, in November 2021, SPEAG has further improved the features and workflow of the module based on valuable customer feedback. Streamlined procedures and improved visualizations now make it easier and smoother to demonstrate compliance with ANSI C63.19-2019.

Compatibility with Windows 10/1

Module HAC V1.2 supports the latest hardware revision of the Audio Magnetic Measurement Instrument (AMMI). Based on the Roland Rubix22 USB audio interface, it is fully compatible with Windows 10/11.

Simplified Procedure

In Module HAC V1.2, the hearing aid compatibility test arch position and probe calibration results are persistent. It is no longer necessary to import them after restarting the Jupyter notebook – the last used values are automatically restored.

AngleCalibration

System response during probe angle determination

 

Automated Calculation of Codec / System Delay

The audio signal emitted by the wireless device under test may be delayed due to the codec latency. In Module HAC V1.2, this parameter no longer needs to be evaluated manually: it is now determined automatically in post-processing.

Additional Viewer Options

The field viewer comes with many new features: for example, users can now edit the color bar range and export all displayed data. In addition, the spectrally weighted undesired magnetic noise can now be visualized.

FieldViewer

H-field distribution for a Telephone Magnetic Field Simulator (TMFS) measured in transverse orientation. The color bar range is editable

 

Intuitive Communication System User Interface

The communication system selection has also been further improved: the layout is more user-friendly and the most frequently used test channels (low/middle/high) are more prominently highlighted.

CommunicationSystems

Selection of the communication system to be measured

 

Improved Post-Processing of Undesired Audio Band Magnetic Field

The post-processing algorithm for evaluating the undesired magnetic field in the audio band has been improved to avoid overestimation of when low-frequency components dominate.

 

DASY8/6 Module HAC V1.2, together with the updated manuals, can be downloaded here.

Your feedback helps us to constantly improve our products and services. If you have thoughts and suggestions, please reach out to us at support@speag.swiss.

For further information on DASY8/6 Module HAC V1.2 or any of our other products, please contact us at info@speag.swiss or via any of our sales channels.

 

SIMULATION

Aug 26, 2011

Contact
semx-support@speag.swiss

 

SEMCAD X Light v14.6.2 Release

The SEMCAD X Team is pleased to announce the release of SEMCAD X Light V14.6.2, a limited version of SEMCAD X v14.6.2 Aletsch.

 
SIMULATION

Jul 21, 2011

Contact
semx-support@speag.swiss

 

SEMCAD X v14.6.1 Release

The SEMCAD X Team is pleased to announce the release of SEMCAD X v14.6.1, an update of SEMCAD X Aletsch v14.6.

 
SIMULATION

Jun 29, 2011

Contact
semx-support@speag.swiss

 

SEMCAD X Student Research Award 2010 Winners

Schmid & Partner Engineering AG (SPEAG) is very pleased to announce the winners of SEMCAD X Student Research Award 2010.

 
MEASUREMENT

Jun 20, 2011

Contact
info@speag.swiss

 

iSAR Quad Release

iSAR Quad is officially released! iSAR Quad is the largest and highest-resolution iSAR available. iSAR Quad is well suited for scanning laptops, tablet computers and other large devices. It also improves the precision for SAR evaluations of devices operating above 3 GHz. We provide an upgrade option from iSAR Flat to iSAR Quad.

 
MEASUREMENT

May 25, 2011

Contact
info@speag.swiss

 

DASY52 V6.2 and SEMCAD X V14.4.5 Software Release

The DASY team is pleased to announce the release of DASY52 V6.2 (482) and SEMCAD-X V14.4.5 (3634). We recommend the immediate installation of this upgrade as it addresses reported bugs and various minor requests/ suggestions by our customers.

 
SIMULATION

May 13, 2011

Contact
semx-support@speag.swiss

 

Desmond Yeo Wins 1st Prize Engineering Poster at ISMRM 2011

Desmond Yeo, from GE Global Research, wins the 1st price in the Engineering Poster Session with poster #1811 using SEMCAD X:

INVESTIGATION OF A DUAL-FUNCTION APPLICATOR FOR RF HYPERTHERMIA AND MRI

 
SIMULATION

May 5, 2011

Contact
semx-support@speag.swiss

 

SEMCAD X V14.6.0 Aletsch

The SEMCAD X Team is pleased to announce the release of SEMCAD X V14.6.0 Aletsch, a major upgrade offering a range of powerful new Modules and features, more robust handling as well as new customization options.

 
MEASUREMENT

Apr 22, 2011

Contact
info@speag.swiss

 

Improved Broad-Band Liquids

SPEAG completed its development of greatly improved head and body tissue simulating liquids for the frequencies from 3500 to 5800 MHz. This new broad-band liquids are within ±5% to the target values and provide significantly improved long-time stability and reduction of the maintenance efforts. Therefore, they lower costs and improve reproducibility of the test results.

 
MEASUREMENT

Apr 14, 2011

Contact
info@speag.swiss

 

iSAR Quad pre-release

iSAR Quad is the largest and highest-resolution iSAR available. iSAR Quad is capable of scanning a 600 mm x 400 mm planar area with a 1 mm resolution, making it well suited for scanning laptops, tablet computers and other large devices. 

 
SIMULATION

Mar 31, 2011

Contact
semx-support@speag.swiss

 

SEMCAD X Light v14.4.4 Release

The SEMCAD X Team is pleased to announce the release of SEMCAD X Light V14.4.4, a limited version of SEMCAD X v14.4.3 Aletsch.

 
Page 27 of 32
 
 
Latest News