Swissmade
NEWS
29/07/2020
MEASUREMENT

mmWave ½SAM Phantoms Extend OTA Testing in CATR for 5G FR2 Devices

SPEAG’s two new mmWave ½SAM phantoms are optimized for testing mobile phone and other ear-mounted devices in talk mode at frequencies from 6 to >100 GHz and meet the quiet zone and weight restrictions of mmWave CATR and OTA chambers.

With the release of the new mmWave ½SAM right and left head phantoms, SPEAG is extending the frequency coverage from <0.3 – 6 GHz to 0.3 – >100 GHz, thus allowing its customers to perform reliable and repeatable over-the-air (OTA) performance evaluations of devices including 5G New Radio Frequency Range 2 and any other mmWave wireless operating systems. The mmW-½SAMR/L-V11 packages consist of the right or left head phantom, the mounting structure, a 6-degree positioning mask, and our universal talk-mode fixtures compatible with all of our talk-mode hands. Each package:

  • is fully compliant with the target values of current and future CTIA test plans and the reflection properties of the human skin for frequencies >100 GHz;
  • is optimized for use in compact antenna test ranges (CATR) or other chambers for OTA evaluations with a 30 cm quiet zone or larger;
  • has a half-head geometry compliant with SAM data as defined by IEEE, 3GPP, and CTIA and is available for right and left-hand usage, whereas the deviation to the full SAM head phantom is <0.2 dB for frequencies >6 GHz;
  • is light weight with only 2.5 kg.

The new mmW-½SAMR/L-V11 phantom packages are an advanced solution for passive and active OTA testing from 6 to >100 GHz.

To receive a quotation or for further information, please contact us at info@speag.swiss.

CORPORATE

11/10/2017

Contact
info@speag.swiss

 

SPEAG Sponsors Awards at 2nd International Workshop on Photonics Applied to Electromagnetic Measurements (PEM2017)

Schmid & Partner Engineering AG (SPEAG) sponsored the awards at the 2nd International Workshop on Photonics Applied to Electromagnetic Measurements (PEM2017), hosted by the IT'IS Foundation and held at the Volkshaus in Zurich, Switzerland on October 5 – 6, 2017. The PEM workshops are devoted to the research, development, and application of photonics in electromagnetic measurements and closely related fields, such as fiber-optic signal transmission, photonic signal processing, display integrated antennas, and photonic device technology.

 
MEASUREMENT

26/09/2017

Contact
info@speag.swiss

 

Release of ICEy-mmW Module V1.0

SPEAG is proud to announce the ICEy-mmW Module Release V1.0, featuring highly automated, contactless testing of power density compliance of 5G and WiGig devices with micrometer precision.

 
CORPORATE

22/09/2017

Contact
info@speag.swiss

 

SPEAG and ZMT Workshop in South Korea on 27 October 2017

Schmid & Partner Engineering AG (SPEAG) and ZMT Zurich MedTech AG (ZMT) are pleased to announce their annual hardware and software workshop, to be held in Seoul, South Korea, on 27 October 2017. Our in-house experts, together with our partners from Dymstec, will demonstrate SPEAG's and ZMT's latest innovations and product updates and provide information about standards trends and our roadmap for addressing emerging industry needs.

 
MEASUREMENT

29/08/2017

Contact
info@speag.swiss

 

New 106/410/DPAS published for vector measurement-based SAR testing systems (frequency range 30 MHz – 6 GHz)

A DPAS (Draft Publicly Available Specification) of Part 3 of the IEC standard 62209, which will allow the use of standardized fixed sensor array systems in addition to robot-based scanning systems, has been submitted for IEC approval.

 
MEASUREMENT

24/08/2017

Contact
info@speag.swiss

 

IT'IS at ICES TC95 Meeting in Rosslyn, VA, 14-16 Aug 2017

In August 2017, the International Committee on Electromagnetic Safety (ICES) Technical Committee 95 held their bi-annual meeting in Rosslyn, VA, to update electromagnetic exposure standards.

 
MEASUREMENT

08/08/2017

Contact
info@speag.swiss

 

cDASY6 5G Module Release V1.0

SPEAG is proud to announce cDASY6 5G Module Release V1.0, featuring reduced scan time, automated evaluation of several planes, and a simplified user-interface.

 
MEASUREMENT

01/08/2017

Contact
info@speag.swiss

 

Communication Systems Update

Updated communication system summary for usage with DASY6 and cSAR3D.

 

 
CORPORATE

26/06/2017

Contact
info@speag.swiss

 

Successful SPEAG / ZMT Hardware and Software Workshops in China and Taiwan

SPEAG, ZMT Zurich MedTech AG and their distribution partner in China and Taiwan, AUDEN Technology Corporation, hosted the popular Annual Hardware & Software Workshop Series in Beijing, Shanghai and Shenzhen (China), as well as Taipei (Taiwan) in June 2017. Overall, more than 200 participants from industry and academia explored SPEAG's and ZMT’s latest innovations and product updates, and discovered how SPEAG’s and ZMT’s solutions and technology roadmap adds value to their current R&D operations while anticipating future technological advances in 2017 and beyond.

 
MEASUREMENT

22/06/2017

Contact
info@speag.swiss

 

cDASY6 Release V6.4

SPEAG is happy to announce the release of cDASY6 V6.4. With V6.4, the greatly reduced measurement time and the testing automatization of our DASY6 system is now accepted by all regulators. The release also entails all necessary features to meet the upcoming unified IEC 62209-U standard and is capable of testing all IoT devices.

 
SIMULATION

07/06/2017

Contact
semx-support@speag.swiss

 

SEMCAD X Matterhorn Release V16.4

SPEAG is proud to release Version 16.4 of its SEMCAD X Matterhorn simulation platform, offering major performance boosts from subgridding to high performance computing (HPC) and Cloud Computing! Moreover, all toolsets, including our powerful 5G simulation package, have been refined to further automate and streamline the application flows in areas of equipment optimization, 5G/wireless technology and optimization of in-/on-body communication devices - making your simulations once again faster and more effective.

 
Page 9 of 29
 
 
Latest News