Swissmade
NEWS
May 17, 2022
MEASUREMENT

DASY8/6 Module HAC V1.2: Packed with New Features

Simplified procedures, additional viewer options, and more: SPEAG has further improved the user experience when testing compatibility with DASY8/6 Module HAC V1.2 between a wireless device and hearing aids according to ANSI C63.19-2019.

After the successful launch of the first version of our hearing aid compatibility module, DASY8/6 Module HAC V1.0, in November 2021, SPEAG has further improved the features and workflow of the module based on valuable customer feedback. Streamlined procedures and improved visualizations now make it easier and smoother to demonstrate compliance with ANSI C63.19-2019.

Compatibility with Windows 10/1

Module HAC V1.2 supports the latest hardware revision of the Audio Magnetic Measurement Instrument (AMMI). Based on the Roland Rubix22 USB audio interface, it is fully compatible with Windows 10/11.

Simplified Procedure

In Module HAC V1.2, the hearing aid compatibility test arch position and probe calibration results are persistent. It is no longer necessary to import them after restarting the Jupyter notebook – the last used values are automatically restored.

AngleCalibration

System response during probe angle determination

 

Automated Calculation of Codec / System Delay

The audio signal emitted by the wireless device under test may be delayed due to the codec latency. In Module HAC V1.2, this parameter no longer needs to be evaluated manually: it is now determined automatically in post-processing.

Additional Viewer Options

The field viewer comes with many new features: for example, users can now edit the color bar range and export all displayed data. In addition, the spectrally weighted undesired magnetic noise can now be visualized.

FieldViewer

H-field distribution for a Telephone Magnetic Field Simulator (TMFS) measured in transverse orientation. The color bar range is editable

 

Intuitive Communication System User Interface

The communication system selection has also been further improved: the layout is more user-friendly and the most frequently used test channels (low/middle/high) are more prominently highlighted.

CommunicationSystems

Selection of the communication system to be measured

 

Improved Post-Processing of Undesired Audio Band Magnetic Field

The post-processing algorithm for evaluating the undesired magnetic field in the audio band has been improved to avoid overestimation of when low-frequency components dominate.

 

DASY8/6 Module HAC V1.2, together with the updated manuals, can be downloaded here.

Your feedback helps us to constantly improve our products and services. If you have thoughts and suggestions, please reach out to us at support@speag.swiss.

For further information on DASY8/6 Module HAC V1.2 or any of our other products, please contact us at info@speag.swiss or via any of our sales channels.

 

CORPORATE

Sep 22, 2017

Contact
info@speag.swiss

 

SPEAG and ZMT Workshop in South Korea on 27 October 2017

Schmid & Partner Engineering AG (SPEAG) and ZMT Zurich MedTech AG (ZMT) are pleased to announce their annual hardware and software workshop, to be held in Seoul, South Korea, on 27 October 2017. Our in-house experts, together with our partners from Dymstec, will demonstrate SPEAG's and ZMT's latest innovations and product updates and provide information about standards trends and our roadmap for addressing emerging industry needs.

 
MEASUREMENT

Aug 29, 2017

Contact
info@speag.swiss

 

New 106/410/DPAS published for vector measurement-based SAR testing systems (frequency range 30 MHz – 6 GHz)

A DPAS (Draft Publicly Available Specification) of Part 3 of the IEC standard 62209, which will allow the use of standardized fixed sensor array systems in addition to robot-based scanning systems, has been submitted for IEC approval.

 
MEASUREMENT

Aug 24, 2017

Contact
info@speag.swiss

 

IT'IS at ICES TC95 Meeting in Rosslyn, VA, 14-16 Aug 2017

In August 2017, the International Committee on Electromagnetic Safety (ICES) Technical Committee 95 held their bi-annual meeting in Rosslyn, VA, to update electromagnetic exposure standards.

 
MEASUREMENT

Aug 8, 2017

Contact
info@speag.swiss

 

cDASY6 5G Module Release V1-0

SPEAG is proud to announce cDASY6 5G Module Release V1-0, featuring reduced scan time, automated evaluation of several planes, and a simplified user-interface.

 
MEASUREMENT

Aug 1, 2017

Contact
info@speag.swiss

 

Communication Systems Update

Updated communication system summary for usage with DASY6 and cSAR3D.

 

 
CORPORATE

Jun 26, 2017

Contact
info@speag.swiss

 

Successful SPEAG / ZMT Hardware and Software Workshops in China and Taiwan

SPEAG, ZMT Zurich MedTech AG and their distribution partner in China and Taiwan, AUDEN Technology Corporation, hosted the popular Annual Hardware & Software Workshop Series in Beijing, Shanghai and Shenzhen (China), as well as Taipei (Taiwan) in June 2017. Overall, more than 200 participants from industry and academia explored SPEAG's and ZMT’s latest innovations and product updates, and discovered how SPEAG’s and ZMT’s solutions and technology roadmap adds value to their current R&D operations while anticipating future technological advances in 2017 and beyond.

 
MEASUREMENT

Jun 22, 2017

Contact
info@speag.swiss

 

cDASY6 Release V6.4

SPEAG is happy to announce the release of cDASY6 V6.4. With V6.4, the greatly reduced measurement time and the testing automatization of our DASY6 system is now accepted by all regulators. The release also entails all necessary features to meet the upcoming unified IEC 62209-U standard and is capable of testing all IoT devices.

 
SIMULATION

Jun 7, 2017

Contact
semx-support@speag.swiss

 

SEMCAD X Matterhorn Release V16.4

SPEAG is proud to release Version 16.4 of its SEMCAD X Matterhorn simulation platform, offering major performance boosts from subgridding to high performance computing (HPC) and Cloud Computing! Moreover, all toolsets, including our powerful 5G simulation package, have been refined to further automate and streamline the application flows in areas of equipment optimization, 5G/wireless technology and optimization of in-/on-body communication devices - making your simulations once again faster and more effective.

 
MEASUREMENT

Jun 6, 2017

Contact
info@speag.swiss

 

cDASY6 acceptance by FCC

Update from the TCB Council Workshop in Baltimore (2-4 May 2017).

 
MEASUREMENT

Jun 5, 2017

Contact
info@speag.swiss

 

IEC TC106 Meeting Update

IEC Standards TC106, implementing innovative solutions for electromagnetic exposure assessment, have moved towards publication. SPEAG is well positioned to satisfy the needs of these new standards.

 
Page 12 of 32
 
 
Latest News