Swissmade
NEWS
29/07/2020
MEASUREMENT

mmWave ½SAM Phantoms Extend OTA Testing in CATR for 5G FR2 Devices

SPEAG’s two new mmWave ½SAM phantoms are optimized for testing mobile phone and other ear-mounted devices in talk mode at frequencies from 6 to >100 GHz and meet the quiet zone and weight restrictions of mmWave CATR and OTA chambers.

With the release of the new mmWave ½SAM right and left head phantoms, SPEAG is extending the frequency coverage from <0.3 – 6 GHz to 0.3 – >100 GHz, thus allowing its customers to perform reliable and repeatable over-the-air (OTA) performance evaluations of devices including 5G New Radio Frequency Range 2 and any other mmWave wireless operating systems. The mmW-½SAMR/L-V11 packages consist of the right or left head phantom, the mounting structure, a 6-degree positioning mask, and our universal talk-mode fixtures compatible with all of our talk-mode hands. Each package:

  • is fully compliant with the target values of current and future CTIA test plans and the reflection properties of the human skin for frequencies >100 GHz;
  • is optimized for use in compact antenna test ranges (CATR) or other chambers for OTA evaluations with a 30 cm quiet zone or larger;
  • has a half-head geometry compliant with SAM data as defined by IEEE, 3GPP, and CTIA and is available for right and left-hand usage, whereas the deviation to the full SAM head phantom is <0.2 dB for frequencies >6 GHz;
  • is light weight with only 2.5 kg.

The new mmW-½SAMR/L-V11 phantom packages are an advanced solution for passive and active OTA testing from 6 to >100 GHz.

To receive a quotation or for further information, please contact us at info@speag.swiss.

CORPORATE

27/12/2017

Contact
info@speag.swiss

 

A Farewell to Fin Bomholt

All of Z43 gathered around the bar to bid a fond farewell to Dr. Fin Bomholt, SPEAG's Director Research & Development, on the occasion of his retirement.

 
CORPORATE

18/12/2017

Contact
info@speag.swiss

 

Winter 2017 Info Day at Z43

On Thursday, December 14, Niels Kuster delivered his annual "State of Z43" report to all employees. The presentation was followed by an apéro, where Niels was presented with a life-size portrait of himself!

 
MEASUREMENT

05/12/2017

Contact
info@speag.swiss

 

Communication Systems Update

Updated communication system summary for usage with DASY6 and cSAR3D.

 

 
CORPORATE

13/11/2017

Contact
info@speag.swiss

 

Future Photonics Engineers! Z43 Future Day 2017

On Thursday, November 9, nine preteens participated in the 2017 edition of Swiss National Future Day at Z43 to assemble their own photo-active circuits and build light-sensitive robots.

 
MEASUREMENT

06/11/2017

Contact
info@speag.swiss

 

Updates from IEC TC 106 Meetings and TCB Council Workshop

At the recent IEC TC 106 meetings in Melbourne and the TCB Council Workshop in Baltimore, major milestones towards the regulatory and standards acceptance of EM exposure assessment of emerging wireless devices were presented.

 
CORPORATE

31/10/2017

Contact
info@speag.swiss

 

Annual SPEAG / ZMT Hardware and Software Workshop in South Korea: A Great Success!

SPEAG and ZMT Zurich MedTech AG (ZMT) held their annual South Korea Hardware and Software Workshop at the Gachon Convention Center in Sungnam-si, Gyeonggi-do, South Korea on 27 October 2017. Approximately 180 engineers and scientists from leading companies, universities, and government institutions of South Korea attended the event, which, as always, was a great success.

 
MEASUREMENT

31/10/2017

Contact
info@speag.swiss

 

cSAR3D: The Only Vector SAR System to Fully Meet the Demanding Requirements of IEC 62209-3

Recent tests from independent laboratories have shown that cSAR3D meets the stringent requirements of draft IEC 62209-3. All evaluated cSAR3D systems pass the validation protocol.

 
MEASUREMENT

24/10/2017

Contact
info@speag.swiss

 

The first FCC-type certification of a 60 GHz WiGig module granted on the basis of assessment with SPEAG’s unique 5G test system

The FCC has recently granted the first RF exposure type approval for a WiGig embedded wireless communication module. Compliance with FCC limits was demonstrated with SPEAG’s 5G solution.

 
MEASUREMENT

17/10/2017

Contact
info@speag.swiss

 

System Check and Validation Sources for 5G Now Available from 10 – 110 GHz

Last milestone in instrumentation for smooth 5G certification achieved.

 
Page 8 of 29
 
 
Latest News