Swissmade
NEWS
02/09/2021
MEASUREMENT

New API for MAGPy V1.0

Simple and powerful: The new application programming interface of MAGPy V1.0 allows the programming and easy integration in customer-specific applications in complex environments.

With the new application programming interface (API) of SPEAG’s Magnetic Amplitude and Gradient Probe System (MAGPy) V1.0, only a few lines of codes are required to enable:

  • complex scanning with a robot, e.g., below a car or inside the car  
  • remote or long-term monitoring of field levels
  • monitoring in high field strength or hazardous environments
  • applications where the field is to be measured at several peak frequencies under automated control


The MAGPy-API is available in the MAGPy 1.0 Desktop application from version 1.0.36.

Further information about MAGPy V1.0 can be found here.

Contact info@speag.swiss or any of our sales channels to request an upgrade, for further information, or to receive a quotation.


MEASUREMENT

07/08/2018

Contact
info@speag.swiss

 

New Software Release DAK Version 2.4.1.202

We are pleased to announce the release of DAK software version 2.4.1.202. Based on the valuable feedback from our rapidly growing customer base, this important maintenance release further improves the accuracy, repeatability, and user experience of measurements with our DAK product line.

 

 
CORPORATE

22/07/2018

Contact
info@speag.swiss

 

SPEAG Changes Domain Name to dot(.)swiss

Another important milestone in Z43 history: SPEAG is proud to announce the introduction of our brand-new domain name www.speag.swiss!

 
MEASUREMENT

10/07/2018

Contact
info@speag.swiss

 

Release of Optical Head for Vector Network Analyzers

SPEAG is proud to announce the release of OH4VNA - a miniaturized optical head for cable-free testing of electrically small antennas between 500 MHz – 6 GHz.

 
CORPORATE

09/07/2018

Contact
info@speag.swiss

 

Niels Kuster Presents Keynote Lecture on IoT at Symposium Co-Organized by the AUDEN Group and the IEEE EMC Chapter

SPEAG's President of the Board Niels Kuster presented keynote lectures on “EM Evaluation and Optimization of IoT Systems: Standards, Software and Instrumentations” and “Workflow for Demonstration of Compliance of Transmitters Operating above 10 GHz” at a symposium on IoT co-organized by the AUDEN Group and the IEEE EMC Chapter in Taipei on July 4, 2018. 

 
MEASUREMENT

03/07/2018

Contact
info@speag.swiss

 

Communication Systems Update

Updated communication system summary for usage with DASY6 and cSAR3D.

 

 
MEASUREMENT

26/06/2018

Contact
info@speag.swiss

 

POPEYE-V10: Just Like a Human but Stronger and Consistent

SPEAG is proud to introduce POPEYE Version 10, our redesigned electromagnetic human body phantom that introduces striking new details in addition to its main features.

 
CORPORATE

18/06/2018

Contact
info@speag.swiss

 

Successful Exhibition at IEEE MTTS-IMS 2018 in Philadelphia

Successful exhibition at this year's IEEE MTT-S 2018 International Microwave Symposium in Philadelphia PA, where SPEAG showcased a range of new high-performance smart products explicitly designed to cover 5G technologies.

 
MEASUREMENT

12/06/2018

Contact
info@speag.swiss

 

Release of New OTA Phantom Series for 5G and IoT

SPEAG released a new generation of phantoms covering the entire frequency range from 3 GHz to over 100 GHz. The solution is both simple and elegant and improves the surface quality and sustainability of the phantoms.

 
MEASUREMENT

06/06/2018

Contact
info@speag.swiss

 

5G Module V1.2: Offering More Automation, Features and Speed

Power density compliance testing has never been easier: SPEAG’s latest software release, Version 1.2 of our 5G Module, is yet another step forward in our drive to provide you with even more automated and more versatile tools for analysis and assessment of compliance at frequencies above 10 GHz!

 
CORPORATE

28/05/2018

Contact
info@speag.swiss

 

13th Annual Hardware and Software Workshop Series in Taiwan and China Organized by AUDEN Technology Corporation

Another Successful Hardware and Software Workshop for SPEAG and ZMT Zurich MedTech AG in Taipei, Beijing, Shanghai, and Shenzhen in May 2018.

 
Page 8 of 30
 
 
Latest News