Swissmade
DASY8
2402 wpt banner s2
Module WPT

DASY8 Module WPT V2.6+

Picture above shows DASY8 Module WPT V2.x

DASY8 Module WPT V2.6+ is based on the MAGPy Version 2 technology integrated in our DASY8 product line for high-precision robot-based evaluations of wireless power transfer (WPT) devices. It is the only system for fully automated compliance testing according to all international standards and national regulations, e.g., IEC PAS 63184, FCC KDB 680106 D01, ISED Canada SPR-002. While DASY8 Module WPT V2.6+ is the most accurate system for the evaluation of WPT devices and systems in the lab, the handheld MAGPy Version 2 system is designed for in situ evaluations of large WPT devices, such as e.g., vehicular charging systems, that cannot be brought to a lab.

System

DASY8 Module WPT is composed of the isotropic probe MAGPy-8H3D+E3D Version 2, the reference probe (MAGPy-RAφ), and the data acquisition system (MAGPy-DAS) mounted to the DASY8 robot via the emergency stop (MAGPy-ES). It measures the incident electric (E-) and magnetic (H-) fields in a volume from the surface of the device under test (DUT) using advanced field reconstructions to obtain a high-resolution (mm range) field distribution. The induced E-field distributions and specific absorption rate (SAR) are assessed with Sim4Life’s Quasi-Static EM Solver (P-EM-QS) using only the measured data. At each probe location, eight sets of isotropic H-field values and one set of isotropic E-field values are acquired in parallel. The dedicated graphical user interface (GUI) fully automates the testing workflow. 

Applications Laboratory evaluation of WPT systems and any other local electromagnetic source not requiring magnetic (H-) field volume scans exceeding 2000 mm × 1000 mm × 1500 mm:
  • Assessment of high-resolution H-field distribution (3 kHz – 10 MHz)
  • Assessment of high-resolution E-field distribution (3 kHz – 10 MHz)
  • Determination of the induced field and SAR distribution in the standard phantom (3 kHz – 4 MHz)
  • Demonstration of compliance (3 kHz – 4 MHz) with international standards and national regulations, e.g., IEC PAS 63184, FCC KDB 680106 D01, ISED Canada SPR-002
Typical Workflows for Compliance Testing 

Details about testing compliance according to specific regulations are provided in the following Application Notes:

  • Testing compliance of WPT devices with DASY8/6 Modules SAR & WPT according to FCC KDB 447498/680106
  • Testing compliance of WPT devices with DASY8/6 Modules SAR & WPT according to ISED SPR-002 issue 2
  • Testing compliance of WPT devices with DASY8/6 Modules SAR & WPT according to IEC/IEEE 63184
Basic Components

The basic components of DASY8 Module WPT are:

 

MAGPy-DAS

The MAGPy-DAS includes:

  • 27 14-bit ADC channels with 25 MSPs
  • Peak detection stage
  • Hardware supervising unit
  • Data transfer to the backend
  • 22 tap FIR filter
MAGPy-8H3D+E3D V2

The MAGPy-8H3D+E3D probe consists of eight isotropic H-field sensors and one isotropic E-field sensor:

Probe design:

  • Probe length: 335 mm
  • Probe tip diameter: 60 mm
  • 8H3D: eight isotropic 1 cm2-H-field sensors, arranged at the corners of a 22 mm cube
  • First H-field sensor plane: 7.5 mm from the probe tip
  • E3D: one isotropic E-field sensor (dipole/monopole)

Sensor specifications:

  • Frequency range: 3 kHz – 10 MHz
  • H-field dynamic range: 0.1 A/m – 3200 A/m (0.12 µT – 4 mT)
  • H-field extrapolation uncertainty: 0.6 dB (k = 2)
  • E-field dynamic range: 0.08 V/m – 2000 V/m
MAGPy-RAφV2

Specifications of the MAGPy-RAφ reference amplitude and phase probe:

  • Frequency range: 3 kHz – 10 MHz
  • Dynamic range: 0.1 A/m – 3200 A/m (0.12 µT – 4 mT)
  • Loop coil area: 18.9 cm2
  • Sensor size: 51 mm × 51 mm × 0.2 mm
Verification

The following WPT verification sources are available:

Software

Software components:

  • DASY8 Module WPT application programming interface (API)
  • WPT backend
  • Jupyter Notebook GUI
  • Sim4Life plugin (vector potential reconstruction, P-EM-QS solver)
API

Coming soon

Calibration MAGPy-8H3D+E3D probe calibrated according to IEC PAS 63184 (ISO/IEC 17025 accredited)
Validation See chapters 8.4 – 8.7 in the manual of DASY8 Module WPT

 

Option: Advanced Sim4Life Evaluation Upgrade Package 

DASY8 Module WPT is complete and allows compliance testing according to all international standards and national regulations. The Sim4Life upgrade package includes all software components required to go beyond and further assess device-specific user scenarios. The package includes:

(i) Sim4Life Framework

(ii) Upgrade to P-EM-QS Suite (Unstructured Solver)

(iii) MPI-QS Token (package of six)

(iv) Virtual Population Set for Complete Population Coverage (Whole Body and Hand Phantoms)

Posable Ella V3.x Model and Hand
Posable Duke V3.x Model and Hand
Posable Billie V3.x Model and Hand
Posable Thelonious V3.x Model and Hand
Posable Eartha V3.x Model and Hand
Posable Roberta V3.x Model and Hand
Posable Louis V3.x Model and Hand
Posable Dizzy V3.x Model and Hand
Posable Glenn V3.x Model and Hand
Posable Fats V3.x Model and Hand
Posable Jeduk V3.x Model and Hand
Posable Yoon-sun V3.x Model and Hand
 

(v) P-EM-QS Link for Complete ViP Package

Guidelines Compatibility

DASY8 Module WPT is fully compliant with:

  • ICNIRP 2010/ICNIRP 2020
  • ICNIRP 1998
  • IEEE 2005/IEEE 2019
  • FCC
  • HC Safety Code 6
Standard Compatibility

DASY8 Module WPT V2.6+ is compatible with:

  • IEC PAS 63184 (Tier 4 and Tier 2)
  • FCC KDB 680106 D01
  • ISED Canada SPR-002 (2nd edition)

Updated Application Notes are available to guide testing in compliance with the different regulations. If you have questions or have received specific requests from the regulators, please send an email to support@speag.com and we will respond within 24 hours. 

Note that SPEAG's products are always fully compatible with the latest standards, and national regulations. We are members of the IEC/IEEE/ANSI standardization groups and are in continuous contact with the regulators to achieve full compatibility even prior to the release of any standards and new regulations.

Unique Features  
 
  • H-field measurements in air and lossy liquid
  • Accurate local H-field values (loop size: 1 cm2
  • H-field distribution with ±0.2 mm position errors
Benefits  
 
  • No overestimation of exposure
  • Compliance can be demonstrated for field strengths exceeding reference levels by a factor of >1000
  • Fully automated assessment including spectral weighting
  • Accurate local H-field values (loop size: 1 cm2
  • H-field distribution with ±0.2 mm position errors
  • Meeting regulator uncertainty requirement/repeatable evaluations
  • User-specific evaluations (only with Sim4Life)
  • Compatible with all standards
Compatibility DASY6 Module WPT
Product History See product lifetime
Release Date

December 12, 2024 (DASY8 Module WPT V2.8)

 
 
CONTACT INFORMATION
 
Latest News
 
 
Z43 Goes NetZero
Aug 20, 2024
 
Z43 Glowing Night
Sep 21, 2023