PROBES
T1V3 / T1V3LAB - Temp-Probe
T1V3 / T1V3LAB
Temperature Probe for Dosimetric and General Measurements
 |
Sensor with NTC and resistive wires (4-wire system) Built-in shielding against static charges |
| Calibration |
ISO/IEC 17025 calibration service available |
| Temperature Range | 0 – 60°C |
| Accuracy (T) |
±0.2°C absolute (depending on calibration) Resolution: 1 mK Measurement noise: ±2 mK (0.1 s sampling time) |
| Accuracy (dT/dt) |
±2% Measurement noise: ±0.1 mK/s (with 10 s evaluation period) |
| Sensitivity (SAR) | 1 mW/g in head tissue solutions |
| Response Time |
<1 s |
| E-Field Interference | E-field along probe axis: 0.6 mK/s with 1000 V/m over 50 mm E-field normal to probe axis: no measurable effect |
| Dimensions | Length of T1V3: 332 mm (all rigid for robot positioning) Length of T1V3LAB: rigid enclosure with a flexible lead of >200mm (other length on special request) Tip diameter: 1 mm (body: 12 mm) Distance from probe tip to NTC: 1 mm |
| Application | General temperature and temperature rise measurements Dosimetry at higher power levels in small volumes Temperature transfer calibration of SAR probes Very low interaction with the measured field T1V3 can be accurately positioned with robot (±0.1 mm) T1V3LAB has a flexible lead for fixed positioning in complex setups |
| Data Acquisition Systems | DAE4 EASY6-DAE |
| Options | PE300: 300 mm probe length extender SPC: snap probe connector for probe quick connect |
| Compatibility | DASY3, DASY4, DASY52 SAR and higher, EASY6, EASY4/MRI |
