Swissmade
NEWS
01/06/2013

ANSI/AAMI PC69 (2007) Implant EMC Dipoles (450 – 3000 MHz)

ANSI/AAMI PC69 (2007) Implant EMC Dipoles (450 – 3000 MHz)

A set of new dipoles has been developed and optimized for electromagnetic compatibility testing of active implantable medical devices according to ANSI/AAMI PC69-2007. The design of these new dipoles for hand-held operation over a torso simulator tank is optimized for resonance at a distance of 20 mm above the phantom filled with a saline solution. The fully symmetric geometry, with a return loss of >14 dB for a bandwidth of >5.6%, is obtained with a quarter wave balun supported with an inherent dual-stage-matching network. Up to 10 watts can be fed to the SMA connector at the far end, which allows safe operation with a straight RF cable for hand-held scanning of the tested device.

The set of 8 dipoles covers the full frequency range for all 13 specified standard frequencies, and is delivered in a ruggedized transportation box. A compliance certificate is included for each dipole, showing the return loss and the magnetic field distribution in the measurement position.

For detailed specifications see the product page.

 

Complete set of Implant EMC dipoles in the transportation box

 

 

 

 

 

 

 

Complete set of Implant EMC dipoles in the transportation box


For further information or to receive a quotation, please contact us at: info@speag.swiss.

 

Latest News