EUmmWVx / 5G Power Density Probe
E-Field mm-Wave Probe for General Near-Field Measurements

	Two dipoles optimally arranged to obtain pseudo-vector information Minimum three measurements/point, 120º rotated around probe axis Sensors (0.8 mm length) printed on glass substrate protected by high density foam Low perturbation of the measured field Requires positioner which can do accurate probe rotation
Calibration	ISO/IEC 17025 calibration service available
Frequency Range	750 MHz – 110 GHz
Dynamic Range	<20 V/m – 10'000 V/m with PRE-10 (min <20 V/m – 2000 V/m)
Position Precision	<0.2 mm (DASY6) <0.02 mm (ICEy)
Dimensions	Overall length: 320 mm (tip: 20 mm) Tip diameter: encapsulation 8 mm (internal sensor <1mm) Distance from probe tip to dipole centers: <2 mm Sensor displacement to probe's calibration point: <0.3 mm
Applications	E-field measurements of 5G devices and other mm-wave transmitters operating above 6 GHz in <2 mm distance from device (free-space) Power density, H-field, and far-field analysis using total field reconstruction (DASY8/6 Module mmWave or ICEy-mmW module required)
Data Acquisition Systems	DAE4
Options	PRE-10: dynamic range extender SPC: snap probe connector for probe quick connect
Compatibility	DASY8/6 with Module mmWave ICEy + mmW-Module SW2.0 and higher
Additional Documentation	Power Density Measurements of mmWave Devices