Swissmade
cSAR3D
csarbanner4
3-Unit System

3-Unit cSAR3D System 

Description

The 3-unit cSAR3D System includes a flat phantom for body-worn measurements (meeting both IEC and FCC specifications for tissue-simulating medium) and the left and right sides of the SAM head phantom, described in more detail below:

1 cSAR3D Flat HSL or MSL

  • Filling: Broadband Head or Body Simulating Medium
  • including Calibration (650 MHz – 6 GHz)
  • extended Calibration (6 GHz – 10 GHz) available
  • including Validation according to IEC 62209-3
  • extended Validation (300 MHz – 650 MHz) available
  • including cSAR3D software

1 cSAR3D Left Head

  • Filling: Broadband Head Simulating Medium
  • including Calibration (650 MHz – 6 GHz)
  • including Validation according to IEC 62209-3
  • Integrated Mounting Device for Hand-Held Transmitters, Left
  • including cSAR3D software

1 cSAR3D Right Head

  • Filling: Broadband Head Simulating Medium
  • including Calibration (650 MHz – 6 GHz)
  • including Validation according to IEC 62209-3
  • Integrated Mounting Device for Hand-Held Transmitters, Right
  • including cSAR3D software

1 Set of Low-Loss, Low Permittivity Masks for cSAR3D Left and Right Heads

  • 1 cSHL15MV3 - Left 15° Mask
  • 1 cSHR15MV3 - Right 15° Mask

2 Sets of Low-Loss, Low Permittivity Rugged and Foam Spacers for cSAR3D Flat

  • 1 cSF1SV5 - 1 mm Rugged Spacer
  • 2 cSF2SV5 - 2 mm Rugged Spacers
  • 1 cSF5SV5 - 5 mm Rugged Spacer and 1 cSF5SV4 - 5 mm Precise Foam Spacer
  • 1 cSF10SV5 - 10 mm Rugged Spacer and 1 cSF10SV4 - 10 mm Precise Foam Spacer
  • 1 cSF15SV5 - 15 mm Rugged Spacer and 1 cSF15SV4 - 15 mm Precise Foam Spacer

1 Tablet Positioner V2

1 Set of cSAR3D Verification Dipoles

  • 1 D835V2 - cSAR3D Verification Dipole, calibrated for Flat HSL (& MSL) at 835 MHz; values in the Head Phantom also provided
  • 1 D1950V3 - cSAR3D Verification Dipole, calibrated for Flat HSL (& MSL) at 1950 MHz; values in the Head Phantom also provided
  • 1 D2450V2 - cSAR3D Verification Dipole, calibrated for Flat HSL (& MSL) at 2450 MHz; values in the Head Phantom also provided
  • 1 D5GHzV2 - cSAR3D Verification Dipole, calibrated for Flat HSL (& MSL) at 5200 and 5800 MHz; values in the Head Phantom also provided 
  • 1 cSAR3D Verification Dipole Spacer, 15 mm
  • 3 cSAR3D Verification Dipole Spacers, 10 mm

1 Set of Verification Accessories

  • 1 VMLV1 - Verification Mask for cSAR3D Left Head V1
  • 1 VMRV1 -Verification Mask for cSAR3D Right Head V1
  • 1 VAHV1 - Verification Antenna Holder for cSAR3D Heads V1
  • 1 VDSV1 - Verification Dipole Stand for cSAR3D Flat/Quad V1

1 Broadband Power Source for RF Sources containing:

  • 1 POWERSOURCE1 V1 - Broadband USB-fed source V1
  • 1 USB Cable
  • 1 Power Bank Battery Module (including cable)

1 MAIA - Modulation & Audio Interference Analyzer (including USB cable)

1 ANT - Wideband Communication Antenna (including HF cable)

3 CAMOV1 - Overhead Camera Module for cSAR3D Left, Right or Flat V1

  • 1 Camera Post with Integrated Lamp, USB Hub and Power Supply
  • 1 Power Supply Cable
  • 1 USB Cable

1 Desktop PC including Color-Monitor

  • High-end specifications, CCC certification

1 cSAR3D Software V4.x and License

1 cSAR3D System Manual

3 cSAR3D Power Supplies with Power Cables

3 USB Cables

1 USB License Dongle