Swissmade
消息
2024年4月26日
2024

在巴尔的摩举行的TCB理事会研讨会上介绍的最新监管要求和行业动态

符合标准和监管要求的SPEAG解决方案

上周,半年度混合式TCB 理事会研讨会在马里兰州巴尔的摩举行。研讨会恢复成正常的三天演讲形式,其中一天主要讨论加拿大和欧洲的法规,然后是一整天的FCC更新,最后一天是几家公司的技术演讲。

技术研究处处长Alfonso Tarditi博士介绍了KDB 447498 修订版的最新情况,其中包括:

  • 加强指南的技术基础
  • 更统一的指南,减少对外形規格的依赖
  • 减少测试量
  • 将豁免限制扩展到300 MHz以下.

Tarditi博士还就KDB 680106 v04中修订的无线功率传输(WPT)设备暴露评估指南进行了说明。

在4月17日FCC報告KDB 447498修订计划的摘要幻灯片。

ISED关于无线功率传输设备测量方法的RSS-216 Issue 3 也在修订中。RSS-102.SAR.MEAS 正在更新,对时间平均比吸收率(SAR)测量进行了说明,RSS-102.SAR.SIM将成为RSS-102的新增内容,为SAR评估提供数值仿真指南。

Element公司的Michael Derby在介绍欧洲法规时强调,近年来欧盟对国际标准的接受变得更加严格。原因之一是为了避免出现同一评估类型允许使用多种测试方法的问题。另一个原因是RED指令要求在合理可预见的使用条件下进行测试。欧盟委员会正在逐步强制要求在协调后的标准中报告最大的不确定性。

重要的是 DASY8/6 模块 SAR, APD, HAC, 和 mmWave 已经完全符合法规。SPEAG相信于下个月发布的模块WPT V2.6 也将符合所有监管要求。SPEAG将更新WPT应用说明和手册,以提供与修订和更新的法规相兼容的测试指南。

如需了解更多信息,请通过info@speag.swiss 或我们的任何销售渠道与我们联系。

谨致问候,

您的SPEAG团队

MEASUREMENT

2017年1月27日

Contact
info@speag.swiss

 

cSAR3D 校正实验室

SPEAG invests in the future of dry SAR testing systems: New standards drive dedicated Cal Lab

In order to comply with the requirements of the upcoming IEC 62209/ Part 3 SAR testing standards, SPEAG has set up a dedicated laboratory for calibrating ‘dry’ SAR testing systems at their manufacturing facility located in the heart of Zurich. The laboratory complements their already existing and well-established ‘wet’ SAR system service centre.

 
MEASUREMENT

2017年1月10日

Contact
info@speag.swiss

 

用来精确量测4~30MHz近场新的Free-space探头

Novel magnetic and electric field probes suited for precise measurements in the closest vicinity of WPT systems or other sources operating in the low MHz range.

 
MEASUREMENT

2016年12月7日

Contact
info@speag.swiss

 

新商品:DAK-TL的演示

Watch our recent product video demonstrating the latest advancement of our Dielectric Assessment Kit product line. DAK-TL brings automated precise measurements of dielectric permittivity, conductivity and homogeneity of boards, sheets, foils and small samples of tissues or liquids to your bench – giving you results in seconds.

 
MEASUREMENT

2016年11月17日

Contact
info@speag.swiss

 

DASY6与cSAR3D之法规认证: SAR标准的推进

SPEAG is very happy to provide you with an update of the IEC 106 Standard Meetings in Hangzhou, China, together with exciting new data regarding the performance and regulatory acceptance of DASY6 and cSAR3D.

 
MEASUREMENT

2016年11月2日

Contact
info@speag.swiss

 

cSAR3D重复性测试

User Video Shows Unrivaled Repeatability of cSAR3D Fast SAR Test System

 
MEASUREMENT

2016年8月5日

Contact
info@speag.swiss

 

cSARD6 系統-帶領您進入SAR量測下個世代

SPEAG is pleased to announce the release of cSARD6 in Q4 2016, the smart SAR testing solution. cSARD6 integrates cSAR3D with DASY6 and adds new features to create a fully automated and powerful SAR compliance system. This is the most advanced SAR measurement system available today, combining speed and versatility, while maintaining full SAR testing capabilities and compatibility to any of the worldwide standards.

 
MEASUREMENT

2016年2月10日

Contact
info@speag.swiss

 

Anritsu MT8820C Integrates with DASY6 and cSAR3D

Anritsu Corporation’s MT8820C Radio Communication Analyzer now integrates with both DASY6 and cSAR3D from Schmid & Partner Engineering AG (SPEAG) to provide seamless Specific Absorption Rate (SAR) compliance testing that significantly reduces assessment costs and maximizes flexibility.

 
MEASUREMENT

2016年2月6日

Contact
info@speag.swiss

 

Notice: Limited warranty on phantoms

Important notice to avoid shell degradation of SPEAG phantoms due to exposure to aggressive liquids.

 
SIMULATION

2015年12月8日

Contact
semx-support@speag.swiss

 

SEMCAD Matterhorn V15.6 Release

The SEMCAD X Team is pleased to announce the release of SEMCAD Matterhorn V15.6, an update of SEMCAD Matterhorn  V15.4.

 
Page 10 of 35
 
 
Latest News
 
 
MAGPy2 – 性能的飞跃
2023年3月23日
 
 
 
 
介电材料数据库
2021年7月27日
 
首批DASY8系统已出货
2021年5月18日