Contact

Show page in English (United States)

消息

2024年4月26日

2024

在巴尔的摩举行的TCB理事会研讨会上介绍的最新监管要求和行业动态

符合标准和监管要求的SPEAG解决方案

上周，半年度混合式TCB 理事会研讨会在马里兰州巴尔的摩举行。研讨会恢复成正常的三天演讲形式，其中一天主要讨论加拿大和欧洲的法规，然后是一整天的FCC更新，最后一天是几家公司的技术演讲。

技术研究处处长Alfonso Tarditi博士介绍了KDB 447498 修订版的最新情况，其中包括:

加强指南的技术基础
更统一的指南，减少对外形規格的依赖
减少测试量
将豁免限制扩展到300 MHz以下.

Tarditi博士还就KDB 680106 v04中修订的无线功率传输(WPT)设备暴露评估指南进行了说明。

在4月17日FCC報告KDB 447498修订计划的摘要幻灯片。

ISED关于无线功率传输设备测量方法的RSS-216 Issue 3 也在修订中。RSS-102.SAR.MEAS 正在更新，对时间平均比吸收率(SAR)测量进行了说明，RSS-102.SAR.SIM将成为RSS-102的新增内容，为SAR评估提供数值仿真指南。

Element公司的Michael Derby在介绍欧洲法规时强调，近年来欧盟对国际标准的接受变得更加严格。原因之一是为了避免出现同一评估类型允许使用多种测试方法的问题。另一个原因是RED指令要求在合理可预见的使用条件下进行测试。欧盟委员会正在逐步强制要求在协调后的标准中报告最大的不确定性。

重要的是 DASY8/6 模块 SAR, APD, HAC, 和 mmWave 已经完全符合法规。SPEAG相信于下个月发布的模块WPT V2.6 也将符合所有监管要求。SPEAG将更新WPT应用说明和手册，以提供与修订和更新的法规相兼容的测试指南。

如需了解更多信息，请通过info@speag.swiss 或我们的任何销售渠道与我们联系。

谨致问候，

您的SPEAG团队

MEASUREMENT

2015年10月26日

Contact
info@speag.swiss

DAKS-12, SPEAG’s New Portable DAK System for Lower Frequencies

SPEAG is pleased to announce the release of our latest portable dielectric measurement system, the DAKS-12, which combines SPEAG’s DAK-12 probe with a handheld single-port ShockLine MS46121A vector network analyzer from Anritsu. The easy-to-use DAKS-12 is designed for very robust dielectric measurements in the frequency range of 10 MHz – 3 GHz.

MEASUREMENT

2015年9月1日

Contact
info@speag.swiss

DAK Verification Kit

In response to numerous customer requests, SPEAG has developed the DAK Verification Kit for quick and easy verification of the Dielectric Assessment Kit system. The characterized liquid in the Verification Kit will be measured and compared to the imported target data after system calibration, ensuring reliable performance and results.

SIMULATION

2015年7月17日

Contact
semx-support@speag.swiss

SEMCAD Matterhorn V15.4 Update Release

The SEMCAD X Team is pleased to announce the release of SEMCAD Matterhorn V15.4, a major update of SEMCAD Matterhorn V15.0.

MEASUREMENT

2015年4月28日

Contact
ins@auden.com.tw

SMC (Sensor Model Calibration)感测器模组校正推出

The novel SMC Sensor Model Calibration is a breakthrough in signal independent calibration of electromagnetic linearized over a large dynamic range.This new technique increases the flexibility of the end-user and reduces calibration costs while maintaining a low measurement uncertainty.

MEASUREMENT

2015年4月20日

Contact
ins@auden.com.tw

SPEAG发布的光子超宽带RF-光纤转换器（RFoF1P）

SPEAG is excited to announce the launch of a novel product in our TDS lineup – the fully electrically isolated RF-over-Fiber Transducer (RFoF1P). With this new product, SPEAG continues to extend the frontiers of accurate and traceable RF measurements powered by micro-photonic technologies to applications such a conducted EMC/EMI, ESD, antenna correlation and signal integrity measurements as well as to highly immune signal and power links for ultra-low-noise and ultra-wideband transmissions.

MEASUREMENT

2015年4月20日

Contact
ins@auden.com.tw

SPEAG 发布 TDS PXI 控制盒讯息

SPEAG is proud to announce the launch of another member in our TDS lineup – the PXI (PCI eXtensions for Instrumentation) version of the TDS Remote Unit. With this new product SPEAG brings accurate and traceable RF measurements powered by micro-photonic technologies to modular instrumentation.

MEASUREMENT

2015年4月7日

Contact
ins@auden.com.tw

SPEAG发布TDS SNI, EMC扫描的新产品

SPEAG is excited to announce the release of the latest addition to our TDS product family – the TDS SNI probe. With TDS SNI, SPEAG pioneers the use of photonics for accurate and traceable RF measurements in EMC/EMI sniffing applications, bringing the functionality of a benchtop spectrum analyzer to the tip of miniature electrically isolated electric and magnetic field probes.

MEASUREMENT

2015年3月31日

Contact
info@speag.swiss

cSAR3D 和 cDASY6 功能 - 您的回馈对我们非常重要

The response we have received on cSAR3D and cDASY6 products has been outstanding, and we would like your help in prioritizing features for the next software release.

MEASUREMENT

2015年3月16日

Contact
ins@auden.com.tw

cSAR3D 2.0正式释出

The innovation continues with SPEAG's release of cSAR3D V2.0. This release fully integrates all cSAR3D phantom types: Flat, Left Head, Right Head and Quad. Shipments of cSAR3D Quad started in November 2014 and have far exceeded our expectations. SAR measurement of simultaneous transmisson is supported, as is base station simulator automation with both CMU200 and CMW500 from Rohde & Schwarz.

MEASUREMENT

2015年2月23日

Contact
ins@auden.com.tw