IEC 62209-3 (AVALSET-3V1) 的验证天线

描述	AVALSET-3V1是IEC 62209-3定义的一组天线和配件，用于验证任何基于向量测量的系统（例如阵列系统）的性能。如果系统用于认证，这些系统制造商有义务验证系统。AVALSET-3V1还使监管机构和用户能够独立验证制造商规定的规格。验证可确保获得一致的结果，而与被测设备无关。
应用领域	验证任何基于向量测量的系统的性能，并验证不确定性预算。
校准	每个天线都带有ISO / IEC 17025校准证书。校准证书中提供了任何模型类型的每个位置和距离的参考SAR值：平板（MSL，HSL）、左头、右头。

组件
	偶极天线 Inductively-coupled sources with induced electric fields predominantly parallel to the phantom surface. Symmetrical dipole with λ/4 balun. Matched for use near flat phantoms filled with tissue simulating liquids. D750V3: 750 MHz Verification Dipole D835V2: 835 MHz Verification Dipole D900V2: 900 MHz Verification Dipole D1450V2: 1450 MHz Verification Dipole D1750V2: 1750 MHz Verification Dipole D1950V3: 1950 MHz Verification Dipole D2300V2: 2300 MHz Verification Dipole D2450V2: 2450 MHz Verification Dipole D2600V2: 2600 MHz Verification Dipole D3700V2: 3700 MHz Verification Dipole D5GHzV2: 5 GHz Verification Dipole SMA female 50 Ω for each dipole antenna Includes Verification Dipole Spacers (5 mm, 10 mm, 15 mm, 25 mm)
	垂直平面倒F天线（VPIFAs） Sources that are capacitively-coupled to the phantom so that the peak field in the phantom is predominantly perpendicular to the phantom surface V-PIFA750V3: 750 MHz Vertical PIFA V-PIFA835V3: 835 MHz Vertical PIFA V-PIFA1950V3: 1950 MHz Vertical PIFA V-PIFA3700V3: 3700 MHz Vertical PIFA SMA female 50 Ω for each dipole antenna Includes 90 degree angle adapter for proper orientation of the coaxial cable Includes mounting block and spring-loaded antenna holder for use of VPIFAs with the VAHV1
	双峰中央馈电平面倒F天线（2峰CPIFA） Source with two SAR peaks at different magnitudes and locations. Tests the ability of the SAR measurement system to accurately measure both peaks 2P-PIFA2450V1: 2450 MHz Dual-Peak Centrally-Fed PIFA
	POWERSOURCE1 Articulated antenna holder with three joints. It allows easy positioning of verification or validation antennas at a range of locations on the Flat, Left Head, or Right Head phantoms. The antenna can be moved in place with one hand while the locking mechanism is tightened with the other to hold it in place. Then the measurement is done hands-free.
	VAHV1-用于cSAR3D的验证天线支架 Articulated antenna holder with three joints, and spring-loaded end. It allows easy positioning of verification or validation antennas at a range of locations on the Flat, Left Head, or Right Head phantoms. The antenna can be moved in place with one hand while the locking mechanism is tightened with the other to hold it in place. Then the measurement is done hands-free.
	VDSV1-用于cSAR3D平板/方形的验证偶极架 Polycarbonate stand for easy and stable positioning of dipole antennas at fixed locations on Flat and Quad phantoms
	验证偶极子定位垫片 Spacers for dipole antennas, providing four distances: 5 mm 10 mm 15 mm 25 mm (15 mm + 10 mm extension)
	Verification Masks Masks defined in IEC 62209-3 for precise positioning of validation antennas at fixed locations on the left and right head phantoms
	额外需要的设备电源机架（须另外购买）: 具有连续波能力的信号产生器和整个频率范围内所需的调制配置功率放大器带有两个功率传感器的功率计定向耦合器衰减器电缆