Swissmade
消息
2024年2月13日
MEASUREMENT

准备好满足监管机构的要求:DASY8/6 Module WPT V2.4和MAGPy V2.4

作为我们与监管机构持续地交换信息和测量策略的成果,SPEAG改进了软件并发表了七份应用笔记来说明如何根据最新的FCC、ISED和IEC规范来进行测试。

SPEAG的重要任务之一是为根据不同的监管机构的要求和最新的产品标准进行合规性测量而提供最准确和用户友好的工具。DASY8/6 Module WPT V2.4无疑是根据最新规范对无线功率传输设备进行合规性测量的最准确的系统。它也是最方便的途径。另一方面,MAGPy V2.4是在现场合规性测量的最快速和最便捷的工具。

IT’IS 基金会最近的研究证实通过仿真来做合规性测试不可靠而且具有很大的不确定性。因此,我们联合IT’IS开发和实现了一种途径,它利用了仿真的优点但无需建模因而结果准确得多且具有已知的不确定性。 

我们已经完成了应用笔记来详细解释如何根据不同的规范来进行合规性测试并提供相应的科学和工程背景信息。这些应用笔记已经与监管结构分享: 

  • 根据ISED SPR-002 Issue 2使用DASY8/6 Module WPT V2.4+进行合规性测试
  • 根据FCC KDB 680106 D01 v04使用DASY8/6 Module WPT V2.4+进行合规性测试
  • 根据ISED SPR-002 Issue 2使用MAGPy V2.4+进行合规性测试
  • 根据FCC KDB 680106 D01 v04使用MAGPy V2.4+进行合规性测试
  • 根据IEC/IEEE 63184草案使用DASY8/6 Module WPT V2.4+进行合规性测试(即将发表)
  • 根据IEC/IEEE 63184草案使用MAGPy V2.4+进行合规性测试(即将发表)
  • 使用仿真进行合规性测试:最佳方案

新软件DASY8/6 WPT模块V2.4带来了下列主要新特性:

  • 改进的合规性表格显示了绝对数值和依赖于标准的相对数值
  • 改进的局部化电场假设的验证
  • 显示了测量网格
  • 自动生成一个日志文件来记录整个测量过程的设置和执行

MAGPy V2.4软件也被更新来包含将磁场外推到探棒末端。它将允许使用MAGPy来验证待测件的数值模型。

请在这里下载最新的软件版本和应用笔记(WPTMAGPy)。

我们非常希望听到您的反馈!请通过info@speag.swiss联系我们并告诉我们您的评价。

敬上,

您的DASY团队

MEASUREMENT

2023年12月19日

Contact
info@speag.swiss

 

DASY8 APD模块V1.0 – 解锁针对5G NR FR2的吸收功率密度测量

DASY APD模块V1.0是世界上第一套用于10 GHz以上频率暴露评估的近场吸收功率密度测量解决方案。它兼容当下和演进中的所有法规并在减少测试高估水平的同时使得5G和6G设备的彻底的合规性测试成为可能。

 
MEASUREMENT

2023年11月6日

Contact
info@speag.swiss

 

射频暴露评估的最新监管指南和方法

TCB 理事会研讨会和 RF 暴露专题讨论会重点介绍了重要的新发展

 
MEASUREMENT

2023年11月1日

Contact
info@speag.swiss

 

WPT模块和MAGPy为依据最新监管规定进行合规性测试进行了更新

今天SPEAG发布了DASY8/6的WPT模块V2.2和MAGPy V2.2,刚好配合新的监管规定ISED SPR-002第二版和FCC KDB 680106 D01 v04的发布。无线功率传输设备的合规性测试现在可以在没有高估和无需仿真的情况下完成。

 
MEASUREMENT

2023年3月23日

Contact
info@speag.swiss

 

 
MEASUREMENT

2023年3月2日

Contact
info@speag.swiss

 

 
MEASUREMENT

2022年12月20日

Contact
info@speag.swiss

 

 
SIMULATION

2022年12月13日

Contact
semx-support@speag.swiss

 

 
MEASUREMENT

2022年12月9日

Contact
info@speag.swiss

 

 
MEASUREMENT

2022年7月26日

Contact
info@speag.swiss

 

 
MEASUREMENT

2022年5月17日

Contact
info@speag.swiss

 

 
MEASUREMENT

2022年4月28日

Contact
info@speag.swiss

 

 
SIMULATION

2022年3月1日

Contact
semx-support@speag.swiss

 

SEMCAD X Matterhorn发布V20.0

SEMCAD X Matterhorn V20.0 offers powerful new features and important enhancements to further strengthen our customers’ in silico tool set for research, device design and optimization, and compliance evaluation.

 
MEASUREMENT

2022年2月24日

Contact
info@speag.swiss

 

DASY8/6 模块 mmWave V3-0 解决了剩余的近距离近场问题

SPEAG has integrated a novel equivalent source reconstruction algorithm into DASY8/6 that generates Maxwell solutions for the reactive near field from measurements. The first implementation provides accurate and simple certification of Wi-Fi 6E devices.

 
MEASUREMENT

2021年12月14日

Contact
info@speag.swiss

 

始终处于高需求: 全球交付了超过 400 台的 cSAR3D 系统

cSAR3D, the fastest and most accurate vector-array specific absorption rate measurement instrument, is the system of choice for quality assurance and time-averaged SAR measurements.

 
MEASUREMENT

2021年12月7日

Contact
info@speag.swiss

 

DAK软件维护版本V3-0.4.1

SPEAG has released the latest software build 3.0.4.1 for the DAK product line.

 
MEASUREMENT

2021年11月9日

Contact
info@speag.swiss

 

DASY8 HAC2019模块 (ANSI C63.19-2019)

SPEAG has released DASY8 Module HAC2019 that demonstrates the compliance of any wireless device with the latest Hearing Aid Compatibility standard ANSI C63.19-2019 and the FCC requirements. Module HAC2019 is also available for DASY6.

 
MEASUREMENT

2021年9月2日

Contact
info@speag.swiss

 

MAGPy V1-0新的应用程序编程接口

Simple and powerful: The new application programming interface of MAGPy V1-0 allows the programming and easy integration in customer-specific applications in complex environments.

 
MEASUREMENT

2021年7月27日

Contact
info@speag.swiss

 

介电材料数据库

SPEAG’s new dielectric database provides broadband material properties of our phantoms, liquids, and other materials used in our product lines

 
MEASUREMENT

2021年6月17日

Contact
info@speag.swiss

 

MAGPy V1-0 发布 – 10 MHz以下频率的现场合规性测试

SPEAG released MAGPy V1-0, our first high-end handheld system that empowers users to demonstrate compliance in the very close near field of wireless power transfer systems and other high-current industrial systems. MAGPy V1-0 meets all requirements of the latest draft of IEC PAS 63184:2021.

 
MEASUREMENT

2021年5月18日

Contact
info@speag.swiss

 

首批DASY8系统已出货

DASY8, the 8th generation of our state-of-the-art DASY system is here! The most advanced scanning platform currently available now has increased modularity and flexibility and is easier to use. There is also good news for our DASY6 users as they will now also benefit from the latest advancements.

 
MEASUREMENT

2021年5月5日

Contact
info@speag.swiss

 

监管机构的最新决议

Governments in USA, Canada and Germany made statements in April on the adoption of the latest SAR measurement standards. 

 
MEASUREMENT

2021年3月11日

Contact
info@speag.swiss

 

革命性的cSAR3D V5.0:用于进阶TAS的实时SAR

cSAR3D is now 10 times faster, measures and displays the specific absorption rate (SAR) three times per second, and offers validated measurements from 300 MHz – 10 GHz.

 
SIMULATION

2021年2月23日

Contact
semx-support@speag.swiss

 

SEMCAD X Matterhorn V19.2 版发布

SPEAG is pleased to announce the release of SEMCAD X Matterhorn V19.2, our full-wave 3D electromagnetic (EM) simulation software and specialized subpackage of Sim4Life. The new version not only comes with an improved user experience and a smoother look and feel but also with important new features, refinements, and bug fixes.

 
MEASUREMENT

2021年1月12日

Contact
info@speag.swiss

 

DASY6 mmWave V2.2模块:与IEC/IEEE 63195-1/-2 FDIS完全兼容

SPEAG has released DASY6 Module mmWave V2.2 together with the MEO and API Options. Version 2.2 fulfills all requirements of the Final Draft of the IEC/IEEE 63195-1/-2 and offers the necessary features for MIMO testing and for testing automation above 6 GHz.

 
MEASUREMENT

2021年1月6日

Contact
info@speag.swiss

 

MAGPy V1-0: 唯一用于近场合规性测试的设备

SPEAG is delighted to announce the release of MAGPy V1-0, our first high-end handheld system that empowers users to demonstrate compliance in the very close near field of wireless power transfer systems and other high-current industrial systems. MAGPy V1-0 meets all requirements of the latest draft of IEC/IEEE63184 PAS.

 
MEASUREMENT

2020年12月10日

Contact
info@speag.swiss

 

DAK-TL2 – 我们的电介质测量系统中针对薄层样品的新技术

Breakthrough in computational electromagnetics by the IT’IS Foundation leads to SPEAG’s second-generation device for dielectric characterization of samples with limited size or volume.

 
MEASUREMENT

2020年11月24日

Contact
info@speag.swiss

 

cDASY6 WPT模块发布–DASY6的全新MAGPy技术

SPEAG’s new cDASY6 Module WPT is the first-ever solution to demonstrate compliance with the basic restrictions of any magnetic source according to the latest IEC/IEEE63184 DPAS draft. The module is based on SPEAG’s new MAGPy product line.

 
MEASUREMENT

2020年11月10日

Contact
info@speag.swiss

 

DASY6应用于工作在6–10 GHz的设备

In October, FCC issued new interim procedures for demonstrating compliance between 6 – 10 GHz. Just a few weeks later, we are happy to provide a scientifically rigorous solution that enables DASY6 users to meet these new requirements.

 
SIMULATION

2020年10月27日

Contact
semx-support@speag.swiss

 

SEMCAD X Matterhorn 重大发布 V19.0

SPEAG are pleased to announce SEMCAD X Matterhorn V19.0, our full-wave 3D electromagnetic (EM) simulation software and specialized subpackage of Sim4Life V6.0.

 
MEASUREMENT

2020年9月1日

Contact
info@speag.swiss

 

cSAR3D V4.0:阵列系统技术的突破

With the release of cSAR3D V4.0, SPEAG introduces the novel X10 Combiner for high-resolution measurements. It enables SAR and absorbed power density testing from 6 – 10 GHz while also improving the overall measurement accuracy..

 
MEASUREMENT

2020年8月18日

Contact
info@speag.swiss

 

cDASY6模块WPT预发布–DASY6的全新MAGPy技术

SPEAG’s new cDASY6 Module WPT is the first-ever solution to demonstrate compliance with the basic restrictions of any magnetic source according to the latest IEC/IEEE63184 DPAS draft. The module is based on SPEAG’s new MAGPy product line.

 
MEASUREMENT

2020年7月29日

Contact
info@speag.swiss

 

mmWave ½SAM模型为5G FR2设备扩展了在CATR中的OTA测试

SPEAG releases the new mmW-½SAMR/L-V11 phantom packages for over-the-air testing at frequencies from 6 to >100 GHz.

 
MEASUREMENT

2020年7月28日

Contact
info@speag.swiss

 

研究刊物证实:DASY6是最准确的SAR测量系统

Scientific debate corroborates that SPEAG's DASY6 probe-scanning system has low measurement errors (<3%) for simple antennas and provides further support of the robustness of the latest IEC 62209 standard

 
MEASUREMENT

2020年6月18日

Contact
info@speag.swiss

 

cDASY6的SAR模块版本6.14:得益于智能缩放扫描的高时间效率的SAR测量

Smart Zoom Scan in cDASY6 Module SAR V6.14: Simplified and accelerated workflow for SAR compliance testing.

 
MEASUREMENT

2020年6月15日

Contact
info@speag.swiss

 

用于5G NR F2设备OTA测试的mmWave THG-Phantom套件

SPEAG releases the two-hand-grip phantom package and fixture optimized for OTA testing in compact mmWave chambers.

 
MEASUREMENT

2020年5月6日

Contact
info@speag.swiss

 

cDASY6 SAR V6.12模块:自动执行测试流程

New application programming interface enables users to perform quicker, easier, and customized SAR compliance testing by automation of workflows.

 
MEASUREMENT

2020年1月13日

Contact
info@speag.swiss

 

加拿大政府最新公告:当前尚不采用IEC 62209-3

The Canadian Government issued a Notice on January 8, 2020 clarifying its position on the acceptance of SAR measurement standards for wireless device certification. It has reviewed the new IEC 62209-3 standard and concluded that it is currently not adopting this standard.

 
SIMULATION

2019年12月18日

Contact
semx-support@speag.swiss

 

SEMCAD X Matterhorn 18.2版正式发布

With the release of SEMCAD X Matterhorn V18.2, we are introducing new features and extensions that are also implemented and applied in cDASY6. 

 
MEASUREMENT

2019年12月12日

Contact
info@speag.swiss

 

IEC 62209-3发布后的展望

Recent Publication of IEC 62209-3 has Raised Questions and Renewed Interest in Regulatory Acceptance of Vector Measurement-Based Systems for SAR Compliance Testing.

 
MEASUREMENT

2019年10月16日

Contact
info@speag.swiss

 

DASY6 V6.10具有许多创新之处:6 – 10 GHz的SAR / PD,5G NR信号且FCC全面承认

DASY6 V6.10 is the first system on the market that supports SAR measurements between 6 ‒ 10 GHz, estimates epithelial power density (IEEE) or transmitted power density (ICNIRP) values, and includes 5G NR signals.

 
MEASUREMENT

2019年9月10日

Contact
info@speag.swiss

 

让cDASY6模块mmWave V2.0带领您进入新世界

Two new powerful software packages in cDASY6 allow accurate power density compliance testing on the SAM phantoms for the first time.

 
MEASUREMENT

2019年8月29日

Contact
info@speag.swiss

 

用于剂量评估的特定踝关节模型

SPEAG’s new specific Ankle Phantom provides an easy-to-use solution for SAR certification of devices operating on or near the ankle.

 
MEASUREMENT

2019年8月23日

Contact
info@speag.swiss

 

DAK软件新版发布: DAK V2.6.0.5

We are pleased to announce the latest software release of our DAK product line, version 2.6.0.5. This important maintenance release further improves the accuracy, repeatability, speed, and user experience of measurements with our DAK/DAKS and DAK-TL systems.

 
MEASUREMENT

2019年7月10日

Contact
info@speag.swiss

 

cSAR3D的重要发布 V3-0 — 比以往更强大、更精准

cSAR3D V3-0 has an upgraded user interface, enhanced 3D field reconstruction algorithm, new features and on-the-fly measurement uncertainty based on the actual measured SAR data.

 
SIMULATION

2019年6月20日

Contact
semx-support@speag.swiss

 

SEMCAD X Matterhorn重大发布V18.0

With SEMCAD X Matterhorn V18.0, SPEAG is pleased to announce a new and very powerful feature: our new low-frequency electromagnetic solver suite! 

 
MEASUREMENT

2019年5月22日

Contact
info@speag.swiss

 

FCC更新cDASY6中MAIA的使用方法

We are pleased to announce that SPEAG received FCC's official confirmation on full acceptance of MAIA as well as further guidance on the reporting.

 
MEASUREMENT

2019年4月16日

Contact
info@speag.swiss

 

First Whole-Body Phantom WBBDuke for DASY6

With the release of whole-body back phantom WBBDuke, SPEAG’s DASY6 is ready to demonstrate SAR compliance in specific phantoms for any IoT devices.

 
MEASUREMENT

2019年2月19日

Contact
info@speag.swiss

 

发布cDASY6模块mmWave V1.6

SPEAG released the cDASY6 Module mmWave V1.6 with many small but important new features that make compliance testing and documentation easier and faster.

 
SIMULATION

2018年11月27日

Contact
semx-support@speag.swiss

 

SEMCAD X Matterhorn新版本V17.4

With the release of SEMCAD Matterhorn V17.4, SPEAG achieves another milestone by being the first manufacturer to offer a robust and effective method for estimating the maximum exposure of antenna arrays of any size on any arbitrary surface as required by the latest standards drafts.

 
MEASUREMENT

2018年10月16日

Contact
info@speag.swiss

 

CTIA脚踝及胸腔模型在法规发布前領先释出

Another addition to the SPEAG phantom family: we released two new highly-specialized electromagnetic phantoms for over-the-air certification of wireless devices ‒ the generic ANKLE and generic CHEST phantom! These phantoms were developed in close collaboration with CTIA's OTA working group and are expected to be included in the upcoming CTIA test plans.

 
MEASUREMENT

2018年10月4日

Contact
info@speag.swiss

 

FCC新闻和IEC会议报告

New updates from IEC TC106 standardization in Stockholm, TCB Council Workshop in Baltimore, and FCC Laboratory in Columbia, MD

 
MEASUREMENT

2018年10月2日

Contact
info@speag.swiss

 

cDASY6:现在更强大,更为易用,速度更快

SPEAG released cDASY6 V6.8 and cDASY6 Module mmWave V1.4. Both include important and long-awaited new features that not only greatly improve the user experience but also make our DASY6 system even faster with improved precision.

 
MEASUREMENT

2018年9月12日

Contact
info@speag.swiss

 

5G及5G之后的毫米波认证:cDASY6毫米波模块V1.4,V2.0,V3-0和V4.0

SPEAG Releases Its Roadmap Towards an Innovative, Robust, and Comprehensive Toolset for Demonstrating Compliance with Current and Future Safety Guidelines and Regulatory Requirements > 6 GHz.

 
MEASUREMENT

2018年8月21日

Contact
info@speag.swiss

 

具有独特使用因素的定制人体模型加速了无线设备的开发和测试

SPEAG has established a fast, reliable, and cost-effective workflow for development and manufacturing of any customized electromagnetic phantom that provides representative and repeatable testing.

 
MEASUREMENT

2018年8月14日

Contact
info@speag.swiss

 

与人体模型近距离的SAR测试

In line with the upcoming IEC 62209-2 amendment release, SPEAG once again sets the benchmark by providing the solution to measure transmitters in touch with a phantom with maximum precision.

 

 
MEASUREMENT

2018年8月7日

Contact
info@speag.swiss

 

DAK软件最新版本 : DAK V2-4.1.95

We are pleased to announce the release of DAK software version 2.4.1.202. Based on the valuable feedback from our rapidly growing customer base, this important maintenance release further improves the accuracy, repeatability, and user experience of measurements with our DAK product line.

 

 
MEASUREMENT

2018年7月10日

Contact
info@speag.swiss

 

矢量网络分析仪光学探头已经上市

SPEAG is proud to announce the release of OH4VNA - a miniaturized optical head for cable-free testing of electrically small antennas between 500 MHz – 6 GHz.

 
MEASUREMENT

2018年7月3日

Contact
info@speag.swiss

 

UID摘要更新

Updated communication system summary for usage with DASY6 and cSAR3D.

 

 
MEASUREMENT

2018年6月26日

Contact
info@speag.swiss

 

POPEYE-V10

SPEAG is proud to introduce POPEYE Version 10, our redesigned electromagnetic human body phantom that introduces striking new details in addition to its main features.

 
MEASUREMENT

2018年6月12日

Contact
info@speag.swiss

 

SHO3TO110模型系列的发布

SPEAG released a new generation of phantoms covering the entire frequency range from 3 GHz to over 100 GHz. The solution is both simple and elegant and improves the surface quality and sustainability of the phantoms.

 
MEASUREMENT

2018年6月6日

Contact
info@speag.swiss

 

5G模组1.2版

Power density compliance testing has never been easier: SPEAG’s latest software release, Version 1.2 of our 5G Module, is yet another step forward in our drive to provide you with even more automated and more versatile tools for analysis and assessment of compliance at frequencies above 10 GHz!

 
SIMULATION

2018年5月25日

Contact
semx-support@speag.swiss

 

SEMCAD X-5G工具包測試

SEMCAD X’s 5G Toolkit put to the test: A user video demonstrates the design workflow of on-device phased-array antennas by exploiting the features of the new SEMCAD X 5G Toolkit, including the unique worst-case power density evaluator.

 
MEASUREMENT

2018年4月11日

Contact
info@speag.swiss

 

cDASY6.6 发布

SPEAG released cDASY6.6 which is fully compatible with IEC 62232 and the voting drafts of IEC 62209-U / IEC 62209-3 and from which DASY6 customers can benefit with immediate effect.

 
SIMULATION

2018年2月20日

Contact
semx-support@speag.swiss

 

SEMCAD X Matterhorn V17.0 发布

SPEAG is proud to announce a major release of SEMCAD X Matterhorn V17.0! With the new release, we are particularly proud to make our innovative and easy-to-use multi-parameter, multi-goal Optimizer Framework V1 available to all of our customers.

 
MEASUREMENT

2018年2月13日

Contact
info@speag.swiss

 

cDASY6.6 Beta版本

Ahead of the official release of cDASY6.6 on March 6, 2018, SPEAG has made a Beta version available for early adopters. cDASY6.6 includes many striking features, such as the full integration of specific phantoms, and the Fast Volume Scan.

 
MEASUREMENT

2018年2月6日

Contact
info@speag.swiss

 

cSAR3D-A:全自动SAR测试

cSAR3D-A Version 1 combines the most reliable vector-based array system cSAR3D with the precision robot of DASY6. It enables fully automated SAR evaluations with thousands of single SAR measurements - with only one click.

 
MEASUREMENT

2017年11月6日

Contact
info@speag.swiss

 

IEC TC106会议和TCB研讨会更新

At the recent IEC TC 106 meetings in Melbourne and the TCB Council Workshop in Baltimore, major milestones towards the regulatory and standards acceptance of EM exposure assessment of emerging wireless devices were presented.

 
MEASUREMENT

2017年10月31日

Contact
info@speag.swiss

 

cSAR3D:唯一的完全符合IEC 62209-3标准和测试要求的矢量测试系统

Recent tests from independent laboratories have shown that cSAR3D meets the stringent requirements of draft IEC 62209-3. All evaluated cSAR3D systems pass the validation protocol.

 
MEASUREMENT

2017年10月24日

Contact
info@speag.swiss

 

第一批获取FCC授权认可的SPEAG 5G组件

The FCC has recently granted the first RF exposure type approval for a WiGig embedded wireless communication module. Compliance with FCC limits was demonstrated with SPEAG’s 5G solution.

 
MEASUREMENT

2017年10月17日

Contact
info@speag.swiss

 

涵盖10-110GHz的5G系统检查及系统验证

Last milestone in instrumentation for smooth 5G certification achieved.

 
MEASUREMENT

2017年9月26日

Contact
inem@auden.com.tw

 

ICEy-mmW模块V1-0发布

SPEAG is proud to announce the ICEy-mmW Module Release V1-0, featuring highly automated, contactless testing of power density compliance of 5G and WiGig devices with micrometer precision.

 
MEASUREMENT

2017年8月29日

Contact
info@speag.swiss

 

传感器整列SAR的新标准正在推进

A DPAS (Draft Publicly Available Specification) of Part 3 of the IEC standard 62209, which will allow the use of standardized fixed sensor array systems in addition to robot-based scanning systems, has been submitted for IEC approval.

 
MEASUREMENT

2017年8月8日

Contact
info@speag.swiss

 

cDASY6 5G模組1.0版本發布消息

SPEAG is proud to announce cDASY6 5G Module Release V1-0, featuring reduced scan time, automated evaluation of several planes, and a simplified user-interface.

 
MEASUREMENT

2017年6月22日

Contact
info@speag.swiss

 

cDASY6 V6.4 发布

SPEAG is happy to announce the release of cDASY6 V6.4. With V6.4, the greatly reduced measurement time and the testing automatization of our DASY6 system is now accepted by all regulators. The release also entails all necessary features to meet the upcoming unified IEC 62209-U standard and is capable of testing all IoT devices.

 
MEASUREMENT

2017年6月6日

Contact
info@speag.swiss

 

FCC 接受 cDASY6

Update from the TCB Council Workshop in Baltimore (2-4 May 2017).

 
MEASUREMENT

2017年5月30日

Contact
info@speag.swiss

 

IEC 62209-3 可用验证天线

Validation sources enable independent evaluation of the performance of specific absorption rate (SAR) measurement systems, in accordance with draft IEC 62209-3.

 
MEASUREMENT

2017年5月17日

Contact
info@speag.swiss

 

cDASY6重要发布 : 版本6.4

SPEAG is announcing the Beta-Release of cDASY6.4 that offers a multitude of assets and improvements, expanding the existing capabilities of DASY52. At the same time, it is already fully compatible with the upcoming standard IEC 62209-U. The final release will become available on June 20th, 2017.

 
MEASUREMENT

2017年5月10日

Contact
info@speag.swiss

 

5G模块测试版发行

New Beta-version enables power density compliance testing as close as 2 mm from any surface with minimal uncertainty.

 
MEASUREMENT

2017年4月25日

Contact
info@speag.swiss

 

UL進入更有效的SAR測試

PC World has published a video by Underwriters Laboratories Inc. (UL) last week demonstrating their latest fleet of DASY6 systems.

 
MEASUREMENT

2017年4月18日

Contact
info@speag.swiss

 

cDASY6 时间平均SAR测试系统

A user video demonstrates the new time-averaged SAR feature of cDASY6 V6.4.

 
MEASUREMENT

2017年4月4日

Contact
info@speag.swiss

 

穿戴式手臂模型

Standardized Over-The-Air (OTA) evaluation of wrist-worn devices in a precise and repeatable fashion.

 
MEASUREMENT

2017年3月14日

Contact
info@speag.swiss

 

OTA 仿真模型 SAM V4.6BSE

SPEAG’s new OTA phantom SAM V4.6BSE provides maximum flexibility for testing wearable devices mounted to the head.

 
MEASUREMENT

2017年3月7日

Contact
info@speag.swiss

 

快速cSAR3D测量无线设备

Fast SAR measurements are easier than ever! Watch a new user video demonstrating the features of cSAR3D V2.8.

 
MEASUREMENT

2017年2月28日

Contact
info@speag.swiss

 

cSAR3D测量需求量大

China Telecommunication Technology Labs-Terminals (CTTL-Terminals), China’s premier wireless testing authority, is now routinely applying SPEAG’s vector measurement-based array system cSAR3D for pre-compliance evaluations of wireless devices for several of China’s manufacturers.

 
MEASUREMENT

2017年2月25日

Contact
info@speag.swiss

 

IEC 62209标准会议超越期望

cSAR3D closes the gap between innovation and Compliance.

 
MEASUREMENT

2017年2月2日

Contact
info@speag.swiss

 

隆重宣布: 创新革命产品,5G探头

The novel EUmmWV2 probe enables precise very close near-field measurements for frequencies up to 110 GHz.

 
MEASUREMENT

2017年1月27日

Contact
info@speag.swiss

 

cSAR3D 校正实验室

SPEAG invests in the future of dry SAR testing systems: New standards drive dedicated Cal Lab

In order to comply with the requirements of the upcoming IEC 62209/ Part 3 SAR testing standards, SPEAG has set up a dedicated laboratory for calibrating ‘dry’ SAR testing systems at their manufacturing facility located in the heart of Zurich. The laboratory complements their already existing and well-established ‘wet’ SAR system service centre.

 
MEASUREMENT

2017年1月10日

Contact
info@speag.swiss

 

用来精确量测4~30MHz近场新的Free-space探头

Novel magnetic and electric field probes suited for precise measurements in the closest vicinity of WPT systems or other sources operating in the low MHz range.

 
MEASUREMENT

2016年12月7日

Contact
info@speag.swiss

 

新商品:DAK-TL的演示

Watch our recent product video demonstrating the latest advancement of our Dielectric Assessment Kit product line. DAK-TL brings automated precise measurements of dielectric permittivity, conductivity and homogeneity of boards, sheets, foils and small samples of tissues or liquids to your bench – giving you results in seconds.

 
MEASUREMENT

2016年11月17日

Contact
info@speag.swiss

 

DASY6与cSAR3D之法规认证: SAR标准的推进

SPEAG is very happy to provide you with an update of the IEC 106 Standard Meetings in Hangzhou, China, together with exciting new data regarding the performance and regulatory acceptance of DASY6 and cSAR3D.

 
MEASUREMENT

2016年11月2日

Contact
info@speag.swiss

 

cSAR3D重复性测试

User Video Shows Unrivaled Repeatability of cSAR3D Fast SAR Test System

 
MEASUREMENT

2016年8月5日

Contact
info@speag.swiss

 

cSARD6 系統-帶領您進入SAR量測下個世代

SPEAG is pleased to announce the release of cSARD6 in Q4 2016, the smart SAR testing solution. cSARD6 integrates cSAR3D with DASY6 and adds new features to create a fully automated and powerful SAR compliance system. This is the most advanced SAR measurement system available today, combining speed and versatility, while maintaining full SAR testing capabilities and compatibility to any of the worldwide standards.

 
MEASUREMENT

2016年2月10日

Contact
info@speag.swiss

 

Anritsu MT8820C Integrates with DASY6 and cSAR3D

Anritsu Corporation’s MT8820C Radio Communication Analyzer now integrates with both DASY6 and cSAR3D from Schmid & Partner Engineering AG (SPEAG) to provide seamless Specific Absorption Rate (SAR) compliance testing that significantly reduces assessment costs and maximizes flexibility.

 
MEASUREMENT

2016年2月6日

Contact
info@speag.swiss

 

Notice: Limited warranty on phantoms

Important notice to avoid shell degradation of SPEAG phantoms due to exposure to aggressive liquids.

 
SIMULATION

2015年12月8日

Contact
semx-support@speag.swiss

 

SEMCAD Matterhorn V15.6 Release

The SEMCAD X Team is pleased to announce the release of SEMCAD Matterhorn V15.6, an update of SEMCAD Matterhorn  V15.4.

 
MEASUREMENT

2015年10月26日

Contact
info@speag.swiss

 

DAKS-12, SPEAG’s New Portable DAK System for Lower Frequencies

SPEAG is pleased to announce the release of our latest portable dielectric measurement system, the DAKS-12, which combines SPEAG’s DAK-12 probe with a handheld single-port ShockLine MS46121A vector network analyzer from Anritsu. The easy-to-use DAKS-12 is designed for very robust dielectric measurements in the frequency range of 10 MHz – 3 GHz.

 
MEASUREMENT

2015年9月1日

Contact
info@speag.swiss

 

DAK Verification Kit

In response to numerous customer requests, SPEAG has developed the DAK Verification Kit for quick and easy verification of the Dielectric Assessment Kit system. The characterized liquid in the Verification Kit will be measured and compared to the imported target data after system calibration, ensuring reliable performance and results.

 
SIMULATION

2015年7月17日

Contact
semx-support@speag.swiss

 

SEMCAD Matterhorn V15.4 Update Release

The SEMCAD X Team is pleased to announce the release of SEMCAD Matterhorn V15.4, a major update of SEMCAD Matterhorn  V15.0.

 
MEASUREMENT

2015年4月28日

Contact
ins@auden.com.tw

 

SMC (Sensor Model Calibration)感测器模组校正推出

The novel SMC Sensor Model Calibration is a breakthrough in signal independent calibration of electromagnetic linearized over a large dynamic range.This new technique increases the flexibility of the end-user and reduces calibration costs while maintaining a low measurement uncertainty.

 
MEASUREMENT

2015年4月20日

Contact
ins@auden.com.tw

 

SPEAG发布的光子超宽带RF-光纤转换器(RFoF1P)

SPEAG is excited to announce the launch of a novel product in our TDS lineup – the fully electrically isolated RF-over-Fiber Transducer (RFoF1P). With this new product, SPEAG continues to extend the frontiers of accurate and traceable RF measurements powered by micro-photonic technologies to applications such a conducted EMC/EMI, ESD, antenna correlation and signal integrity measurements as well as to highly immune signal and power links for ultra-low-noise and ultra-wideband transmissions.

 
MEASUREMENT

2015年4月20日

Contact
ins@auden.com.tw

 

SPEAG 发布 TDS PXI 控制盒讯息

SPEAG is proud to announce the launch of another member in our TDS lineup – the PXI (PCI eXtensions for Instrumentation) version of the TDS Remote Unit. With this new product SPEAG brings accurate and traceable RF measurements powered by micro-photonic technologies to modular instrumentation.

 
MEASUREMENT

2015年4月7日

Contact
ins@auden.com.tw

 

SPEAG发布TDS SNI, EMC扫描的新产品

SPEAG is excited to announce the release of the latest addition to our TDS product family – the TDS SNI probe. With TDS SNI, SPEAG pioneers the use of photonics for accurate and traceable RF measurements in EMC/EMI sniffing applications, bringing the functionality of a benchtop spectrum analyzer to the tip of miniature electrically isolated electric and magnetic field probes.

 
MEASUREMENT

2015年3月31日

Contact
info@speag.swiss

 

cSAR3D 和 cDASY6 功能 - 您的回馈对我们非常重要

The response we have received on cSAR3D and cDASY6 products has been outstanding, and we would like your help in prioritizing features for the next software release. 

 
MEASUREMENT

2015年3月16日

Contact
ins@auden.com.tw

 

cSAR3D 2.0正式释出

The innovation continues with SPEAG's release of cSAR3D V2.0. This release fully integrates all cSAR3D phantom types: Flat, Left Head, Right Head and Quad. Shipments of cSAR3D Quad started in November 2014 and have far exceeded our expectations. SAR measurement of simultaneous transmisson is supported, as is base station simulator automation with both CMU200 and CMW500 from Rohde & Schwarz.

 
MEASUREMENT

2015年2月23日

Contact
ins@auden.com.tw

 

 
MEASUREMENT

2015年2月15日

Contact
ins@auden.com.tw

 

在旧金山举办法规IEC62209-3发展会议

Significant progress at recent IEC 62209-3 meeting in San Francisco resulted in agreement on broad acceptance of vector array systems such as cSAR3D, and rigorous protocols for validation and uncertainty.

 
MEASUREMENT

2015年1月16日

Contact
ins@auden.com.tw

 

cSAR3D Quad 推出

cSAR3D Quad is ideal for fast and accurate SAR testing of laptops, tablets and other large devices. In November and December 2014, several cSAR3D Quad systems were shipped and installed at customer sites, with many more scheduled to ship in early 2015. SPEAG is very pleased with the popularity and initial demand for cSAR3D Quad among our customers. 

 
MEASUREMENT

2014年10月17日

Contact
info@speag.swiss

 

ISO/ IEC的cSAR3D的校準和TDS17025認證授予!

ISO/IEC 17025 Accreditation for Calibration of cSAR3D and TDS Awarded!

 
MEASUREMENT

2014年8月16日

Contact
ins@auden.com.tw

 

演示錄影檔和 認可 & 軟體發布時間表

With the steady shipment of one cSAR3D FLAT unit per week successfully underway, SPEAG is now ready to ramp up cSAR3D HEAD production with the goal of also shipping three to four calibrated HEAD units per month. A demo video highlighting the exceptional functionality and user-friendliness of the system, including the new camera modules, is now available.

 
SIMULATION

2013年11月25日

Contact
ins@auden.com.tw

 

SEMCAD X v14.8.4 发布

The SEMCAD X Team is pleased to announce the release of SEMCAD X v14.8.5, an update of SEMCAD X Aletsch v14.8.

 
MEASUREMENT

2013年9月6日

Contact
ins@auden.com.tw

 

第九届量测法规技术趋势及数值仿真辅助加速产品未来发展研讨会

A new international standard for SAR measurements, IEEE 1528-2013, was published on 6 September, incorporating new procedures to improve testing efficiency while maintaining excellent measurement reproducibility and low uncertainty.

 
MEASUREMENT

2013年4月11日

Contact
info@speag.swiss

 

DASY52.8.6 and SEMCAD X V14.6.9 Software Release

SPEAG is pleased to announce the release of DASY52.8.6 (1115) and SEMCAD-X V14.6.9 (7117). 

 
SIMULATION

2013年4月2日

Contact
semx-support@speag.swiss

 

SEMCAD X v14.8.3 Update Release

The SEMCAD X Team is pleased to announce the release of SEMCAD X v14.8.3, an update of SEMCAD X Aletsch v14.8.

 
MEASUREMENT

2013年3月28日

Contact
info@speag.swiss

 

New DAK Movie

Release of a brief training video with tips on how to increase the precision of dielectric measurements.

 
MEASUREMENT

2013年3月4日

Contact
info@speag.swiss

 

Solid Spacer V2

We are pleased to announce the release of the optimized spacers SPACERS V2 for our CTIA hand phantoms SHO X.

 

 
MEASUREMENT

2013年2月25日

Contact
info@speag.swiss

 

New Product: POPEYE

In response to customer requests for more versatile phantoms, SPEAG introduces several new whole-body and hand phantoms.

 
MEASUREMENT

2013年2月11日

Contact
info@speag.swiss

 

DAK-1.2 Release & Software Update

We are pleased to announce the release of the optimized high frequency dielectric probe DAK-1.2 covering the frequency range 5 – 50 GHz. At the same time, we extended and improved the features of our software that is now available for download. 

 
SIMULATION

2012年12月21日

Contact
semx-support@speag.swiss

 

SEMCAD X v14.8.2 Update Release

The SEMCAD X Team is pleased to announce the release of SEMCAD X v14.8.2, an update of SEMCAD X Aletsch v14.8.

 
SIMULATION

2012年11月12日

Contact
semx-support@speag.swiss

 

MUSAIK v1.3 发布

The MUSAIK and SEMCAD X Team is pleased to announce the release of MUSAIK v1.3, a feature release of Musaik.

 
SIMULATION

2012年7月12日

Contact
semx-support@speag.swiss

 

SEMCAD X v14.8.1 Update Release

The SEMCAD X Team is pleased to announce the release of SEMCAD X v14.8.1, an update of SEMCAD X Aletsch v14.8.

 
SIMULATION

2012年2月27日

Contact
semx-support@speag.swiss

 

SEMCAD X V14.8.0 Aletsch

The SEMCAD X Team is pleased to announce the release of SEMCAD X V14.8.0 Aletsch, a major upgrade offering a range of powerful new Modules and features, more robust handling as well as new customization options.

 
MEASUREMENT

2011年12月23日

Contact
info@speag.swiss

 

Advance Notice: 探针系统的新世代– TDS

We are proud to announce a breakthrough in EM probe systems. The Time-Domain-Sensor (TDS) is the basis of our novel product line of high-performance active optical radio-frequency field sensor systems. The TDS concept allows the measurement of the full complex vectorial EM field distribution (amplitude and phase) in the time and frequency domains. First TDS probes for E- and H-field measurements in the 10MHz to 6GHz frequency range will become available in the next quarter.

 
SIMULATION

2011年11月22日

Contact
semx-support@speag.swiss

 

MUSAIK v1.2 正式发布。

The MUSAIK and SEMCAD X Team is pleased to announce the release of MUSAIK v1.2, a feature release of Musaik.

 
MEASUREMENT

2011年10月19日

Contact
info@speag.swiss

 

New Product: DAK (Dielectric Assessment Kit)

DAK is our new product line for high-precision dielectric measurements. Our probes are optimized for precision, robustness and ease of use. The software is flexible and operates with the most popular network analyzers on the market. The DAK system is calibrated by our ISO/IEC 17025 accredited laboratory.

 
SIMULATION

2011年9月2日

Contact
semx-support@speag.swiss

 

SEMCAD X v14.6.2 Update Release

The SEMCAD X Team is pleased to announce the release of SEMCAD X v14.6.2, an update of SEMCAD X Aletsch v14.6.

 
MEASUREMENT

2011年6月20日

Contact
info@speag.swiss

 

iSAR Quad Release

iSAR Quad is officially released! iSAR Quad is the largest and highest-resolution iSAR available. iSAR Quad is well suited for scanning laptops, tablet computers and other large devices. It also improves the precision for SAR evaluations of devices operating above 3 GHz. We provide an upgrade option from iSAR Flat to iSAR Quad.

 
MEASUREMENT

2011年5月25日

Contact
info@speag.swiss

 

DASY52 Software Release V6.2

The DASY team is pleased to announce the release of DASY52 V6.2 (482) and SEMCAD-X V14.4.5 (3634). We recommend the immediate installation of this upgrade as it addresses reported bugs and various minor requests/ suggestions by our customers.

 
MEASUREMENT

2011年4月22日

Contact
info@speag.swiss

 

Improved Broad-Band Liquids

SPEAG completed its development of greatly improved head and body tissue simulating liquids for the frequencies from 3500 to 5800 MHz. This new broad-band liquids are within ±5% to the target values and provide significantly improved long-time stability and reduction of the maintenance efforts. Therefore, they lower costs and improve reproducibility of the test results.

 
MEASUREMENT

2011年4月14日

Contact
info@speag.swiss

 

iSAR Quad pre-release

iSAR Quad is the largest and highest-resolution iSAR available. iSAR Quad is capable of scanning a 600 mm x 400 mm planar area with a 1 mm resolution, making it well suited for scanning laptops, tablet computers and other large devices. 

 
MEASUREMENT

2011年3月15日

Contact
info@speag.swiss

 

Golden Validation Device

The Golden Validation Device is a very stable, reliable and easy-to-use calibrated reference source for SAR and OTA measurements. It is a stand-alone device that can be used anywhere without connection to a network. The antenna is well-matched under different loading conditions to provide a reliable output.

 
MEASUREMENT

2011年1月17日

Contact
info@speag.swiss

 

iSAR² V2.3 Software Release

Fast SAR measurements are now faster than ever (less than one second).  Also, combined SAR evaluation of simultaneous transmitters and new flexibility for comparison of iSAR² measurements with DASY or other iSAR² measurements have been introduced. This further cuts the time spent on quality assurance, prototype evaluation and pre-compliance testing of wireless devices.

 
MEASUREMENT

2010年12月31日

Contact
info@speag.swiss

 

DASY52 Software Release V52.6

We are pleased to announce a new release of DASY52. This release not only resolves reported bugs, but also incorporates important new features that result in reduced measurement time, more flexibility and implementation of new measurement protocols arising from the IEC/IEEE standardization committees. Furthermore, many features have been added for the DASY52NEO users.

 
MEASUREMENT

2010年11月26日

Contact
info@speag.swiss

 

iSAR Discounts & Packages

Due to the popularity of our iSAR² systems and the expanding choices of accessories and calibrations, SPEAG announces new discounts and packages for iSAR². This includes discounts on systems and accessories, calibration packages and a special package with SEMCAD X ANTENNA.

 
MEASUREMENT

2010年8月25日

Contact
info@speag.swiss

 

August 24-25 Installation of DASY52NEO at NIM Beijing

August 24-25 Installation of DASY52NEO at NIM Beijing

 
MEASUREMENT

2010年8月24日

Contact
info@speag.swiss

 

iSAR² V2.2 Software Release

We have released iSAR² software version 2.2. New features include remote control of the iSAR² using customer-specific programs, enhanced graphical information of the iSAR² operation, and full compatibility with Windows 7 and Windows XP in 32-bit and 64-bit versions.

 
SIMULATION

2010年8月10日

Contact
semx-support@speag.swiss

 

SEMCAD X v14.2.3 Release

The SEMCAD X Team is pleased to announce the release of SEMCAD X v14.2.3, an update of SEMCAD X Aletsch v14.2.

 
MEASUREMENT

2010年7月17日

Contact
info@speag.swiss

 

New Product: DC/ELF Magnet Field Probe (DASY52NEO Compatible)

SPEAG started to integrate 3rd-Party Probes for our DASY52 NEO systems. The first probes are the 3-axis hall field probe series from MetroLab that enpower DASY52NEO to scan DC/ELF magnetic fields with high precision. 

 
MEASUREMENT

2010年7月16日

Contact
info@speag.swiss

 

New Product: MEM (Membran) Phantom

The new MEM Phantom was desgined and optimized for compliance testing of wireless devices and other electromagnetic emmitting devices that may be partially surrounded by tissue or in direct contact with the skin, e.g., wireless hands-free kits, hearing aids, skin mounted devices, inductive activators, etc.  

 
SIMULATION

2010年7月14日

Contact
semx-support@speag.swiss

 

SEMCAD X Workshop Raffle Winner

At the end of the SEMCAD X User Meeting & Workshop at APS/URSI 2010, a NVIDIA Tesla C1060 card & Acceleware Token license was given away in a raffle.

 
MEASUREMENT

2010年5月13日

Contact
info@speag.swiss

 

New Product: CRANE for iSAR²

SPEAG is introducing the CRANE for iSAR². CRANE enables testing of wireless devices on the iSAR² Flat or Head with headsets or data cables attached.

 
MEASUREMENT

2010年5月6日

Contact
info@speag.swiss

 

New Product: Broad-Band Liquids for new IEC/IEEE standards

SPEAG introduces a new series of tissue simulating liquids that are broad-band based on the environmental friendlier Tween ingredient and fully compliant with the new IEC/IEEE standards allowing ±10% tolerance on the liquid parameters.

 
SIMULATION

2010年5月4日

Contact
semx-support@speag.swiss

 

NRC, with SPEAG, offers a unique software platform for MRI system design

The National Research Council Institute for Biodiagnostics (NRC-IBD) has teamed up with SPEAG to offer a unique software platform for magnetic resonance imaging (MRI) scanner design. The new platform seamlessly integrates powerful new tools for radiofrequency (RF) array design and post-processing and is the first software of its kind to combine all the tools needed to design RF-phased arrays into a single user friendly program.

 
MEASUREMENT

2010年3月6日

Contact
support@speag.swiss

 

New Product: PRE - 10

This new product PRE - 10 is a 3 channel voltage divider which extends the operation of existing SPEAG probes for use in very high fields (> 5 kV/m; > 10 kW/kg). It is compatible with all our E-Field, H-field and SAR probes.

 
SIMULATION

2010年3月3日

Contact
info@speag.swiss

 

New SEMCAD X Distributor in Italy

Schmid & Partner Engineering AG (SPEAG) is pleased to announce a new partnership with Telprom, who will be responsible for selling SEMCAD X in Milano, Italy.

 

ISO 17025 Calibration of Dielectric Probes (OCP) now available

Our calibration laboratory has successfully established the capability for calibration of open-ended coaxial probes (OCP).

 
SIMULATION

2010年2月24日

Contact
semx-support@speag.swiss

 

Release of SEMCAD X Aletsch V14.2

The SEMCAD X Team is pleased to announce the release of SEMCAD X V14.2 Aletsch, a major upgrade  six months of intense deincorporatingvelopment work. This release offers a range of powerful new features, more robust handling, as well as new customization options.

The relevant SEMCAD X for Win XP/ Win 7 and 32/64bit platforms are available for download.

 
MEASUREMENT

2010年2月5日

Contact
support@speag.swiss

 

EASY4 V4.6 New release

The new EASY4 software release V4.6 extends the usage to fields with large peak-to-average (PAR) ratios by adaption to the improved probe modulation signal calibration and also includes setting of Access Levels. The changes to the user interface are minimal and old setup and calibration files are still compatible with this version.

 
MEASUREMENT

2010年1月18日

Contact
info@speag.swiss

 

iSAR² V2.1 Software Release

A new iSAR2 software release is now available. This release is the result of the popularity of our ultra-fast SAR scanners (iSAR Head and iSAR Flat) and great suggestions from our customers. Version 2.1 of the iSAR software has several new features, including a new multi-iSAR interface, a smart Combiner feature, and full extension of the software for frequencies up to 6 GHz. It also includes enhancements to our existing features, such as an improved Python interface and enhanced control of the CMU200.

 
SIMULATION

2010年1月1日

Contact
semx-support@speag.swiss

 

Events & Exhibitions in 2010

Meet SPEAG engineers at the following forthcoming major conferences, symposia and workshops in 2010

 
SIMULATION

2009年11月10日

Contact
info@speag.swiss

 

Beacon Technical Sales, Inc. as New Distributor in U.S.A.

Schmid & Partner Engineering AG (SPEAG) is pleased to announce a new partnership with Beacon Technical Sales, Inc., who will be acting as a distributor of SEMCAD X in Nashua, U.S.A.

 
SIMULATION

2009年10月23日

Contact
info@speag.swiss

 

iSEG V3.1 Release

Zurich Med Tech, a sister company of SPEAG, has developed iSEG, a medical image segmentation tool specially designed to construct realistic 3D human or animal models for SEMCAD X from medical image data. iSEG, the most versatile medical image segmentation tool currently available, quickly and easily creates highly detailed 3D human or animal models based on CT and MRI images in standard image formats. The resulting models can be used to study electromagnetic exposure and induced heating in living tissue.

 
MEASUREMENT

2009年10月16日

Contact
info@speag.swiss

 

Final Release DASY52

The final release of DASY52 is a major upgrade representing the next leap in quality compliance testing of mobile phones and general near-field evaluations. The main new improvements are in the new GUI, Report Generator, Ultra-Fast SAR Procedures, and Advanced Probe Response Linearization.  Many more features that make the system compatible with the revised standards are expected to be released by the end of the year.

 
MEASUREMENT

2009年10月12日

Contact
info@speag.swiss

 

Successful CTIA Audits of SPEAG Head and Hand Phantoms

SPEAG OTA phantoms with accessories were successfully tested during first CTIA V3-0 audits at ETS Lindgren, Austin on October 1st and Qualcomm, San Diego on October 9th.

 
MEASUREMENT

2009年9月25日

Contact
info@speag.swiss

 

iSAR² Calibration is ISO/IEC 17025 Accredited

Schmid & Partner Engineering AG (SPEAG) is now accredited for iSAR calibration to the rigorous ISO/IEC 17025 quality standards. ISO/IEC 17025 is a laboratory quality standard that is widely recognized internationally. The addition of iSAR calibration to the SPEAG quality system provides a large portfolio of products for which SPEAG provides accredited calibration.

 
SIMULATION

2009年8月17日

Contact
info@speag.swiss

 

Dellsoft as New SEMCAD X Reseller in India

Schmid & Partner Engineering AG (SPEAG) is pleased to announce a new partnership with Dellsoft Technologies, who will now act as a reseller of SEMCAD X in India. Dellsoft is a leading technical software company in India. Dellsoft's vision is to  achieve international standards of excellence and to be the leading supplier of technical software, learning programs, and other teaching platforms. Many years of experience in the software business and a strong technical support team will facilitate their efforts in providing SEMCAD X to companies in India. 

 
SIMULATION

2009年7月6日

Contact
info@speag.swiss

 

SEMCAD X Student Research Award 2008 Winner Presentations

The SEMCAD X Student Research Award for 2008 prizes were presented to the winners during the June 2009 IEEE International Symposium on Antennas and Propagation (APS/URSI), in Charleston, SC, USA.

 
SIMULATION

2009年7月1日

Contact
semx-support@speag.swiss

 

SEMCAD X Student Research Award 2008 Winners

Schmid & Partner Engineering AG (SPEAG) is very pleased to announce the winners of SEMCAD X Student Research Award 2008.

 
SIMULATION

2009年5月29日

Contact
semx-support@speag.swiss

 

Release of SEMCAD X Aletsch V14.0

Encapsulating solution oriented technologies combined with the latest Acceleware Batuco drivers, SEMCAD X V14.0 Aletsch defines a new standard in high performance EM and Thermal simulation.

 
SIMULATION

2009年5月29日

Contact
semx-support@speag.swiss

 

SEMCAD X in Nature Magazine

The results of a recent study using SEMCAD X have been published in the latest Nature magazine.

 
MEASUREMENT

2009年2月18日

Contact
info@speag.swiss

 

iSAR² V2.0 Release

During the last 12 months we have completely redesigned the iSAR GUI and added many new functions. The iSAR software V2.0 is now released to all of our customers free of charge.

The series production of iSAR Head has begun and we already enjoy high demands. Please order now!

 
MEASUREMENT

2009年1月30日

Contact
info@speag.swiss

 

HAC T-Coil Update for DASY5/4.7

DASY5 V5.0/4.7 have been updated to satisfy  our customers request to visualize HAC T-Coil measurements to 10 kHz.

 
SIMULATION

2007年12月31日

Contact
info@speag.swiss

 

Exhibitions and Workshops 2007

SPEAG exhibited at the following conferences and exhibitions in the year 2007. 

 
Latest News
 
 
MAGPy2 – 性能的飞跃
2023年3月23日
 
 
 
 
介电材料数据库
2021年7月27日
 
首批DASY8系统已出货
2021年5月18日
 
监管机构的最新决议
2021年5月5日