ICEy-mmW is the most advanced reactive near-field scanning system for the compliance testing of 5G mm-wave transmitters with all international power density safety limits e.g., IEC TC106 AHG10, FCC, etc. ICEy-mmW excels all mm-wave scanning systems with its micrometer precision, optical 3D DUT reconstruction and unparalleled measurement automation.

ICEy comes as a fully integrated turnkey system that includes all the components necessary for you to start making measurements on your device-under-test (DUT) immediately after professional setup and on-site training by our engineers.

ICEy-mmW can be upgraded with all features of ICEy-EMC for unparalleled, traceable EMC/EMI evaluation capabilities.

Positioning System
The four-axis (x,y,z, probe roll) precision Gantry positioning system – with total axis travel of 600 × 500 × 120 mm3, 360° – allows for an accessible DUT scanning volume of 450 × 450 × 115 mm3 with absolute probe positioning accuracy of <±25 μm. Global geometric references for the probe tip location and DUT detection systems are provided by two orthogonal fork LASER light barriers.
Test Chamber
The test chamber is fully shielded to efficiently suppress ambient RF-EM fields. The multi-layered wide-band ECCOSORB FHY-NRL hybrid absorber around the scanning area is used to make the test environment anechoic. Customizable feedthrough inserts are available on either side of the chamber. The chamber integrates a probe repository that holds up to 4 probes and allows for automatic probe exchange.  
DUT Detection
A color camera system that supports synthetic aperture stereo-vision with a resolution of 0.07 × 0.07 mm2/pixel is used to acquire a surface image of the DUT on the workbench, allowing the user to graphically plan the measurements. A highly detailed surface map (detection limit < ± 20 μm) of the DUT is reconstructed based on a sub-pixel detection-enhanced LASER triangulation scan.  
RF M&T Equipment – Probes

An EUmmWV2 probe, a DAE4ICEy as well as a TDS remote unit are included with the ICEy-mmW system. 

Equipment Rack / Scanner Support Table The ICEy test chamber is mounted on a scanner support table that integrates all the electronic equipment required to run the ICEy system. The scanner support table includes a high performance industrial grade PC for system control and post-processing, the ICEy interface and motion control electronics and the TDS remote unit.
External Peripherals On either side of the scanner support table, external peripherals for the operator station can be connected. The system offers 2 HDMI, 8 USB, and 2 Ethernet ports and comes with a 24" LCD, mouse, and keyboard ready for immediate usage.
Validation and Calibration Sources ICEy is delivered with calibration patterns and bodies to calibrate and verify LASER fork light barriers and camera systems.  
System Software The system includes our advanced integrated measurement, control, postprocessing, visualization, and data export software for close-near-field power density scanning. For details, please refer to the ICEy-mmW software description.