Swissmade
DASY6
dasyvisual.jpg
Mounting Device and Adaptors

Mounting Devices and Adaptors

Mounting Device for Hand-Held Transmitters

MD4HHTV5 - Mounting Device for Hand-Held Transmitters

In combination with the Twin SAM V5.0/V5.0c or ELI phantoms, the Mounting Device for Hand-Held Transmitters enables rotation of the mounted transmitter device to specified spherical coordinates. At the heads, the rotation axis is at the ear opening. Transmitter devices can be easily and accurately positioned according to IEC 62209-1, IEEE 1528, FCC, or other specifications. The device holder can be locked for positioning at different phantom sections (left head, right head, flat).

Material: Polyoxymethylene (POM)

 

Mounting Device Adaptor for Wide-Phones

MDA4WTV5 - Mounting Device Adaptor for Ultra Wide Transmitters

An upgrade kit to Mounting Device to enable easy mounting of wider devices like big smart-phones, e-books, small tablets, etc. It holds devices with width up to 140 mm.

Material: Polyoxymethylene (POM)

 

Low Loss Adaptor for Smart Phones

MDA4SPV6 - Mounting Device Adaptor for Smart Phones

The solid low-density MDA4SPV6 adaptor assuring no impact on the DUT radiation performance and is conform with any DUT design and shape.

Material: ROHACELL

 

Mounting Device for Laptops

Mounting Device Adaptor for Laptops

MD4LAPV5 - Mounting Device for Laptops and other Body-Worn Transmitters

In combination with the Twin SAM V5.0/V5.0c or ELI phantoms, the Mounting Device (Body-Worn) enables testing of transmitter devices according to IEC 62209-2 specifications. The device holder can be locked for positioning at a flat phantom section.


Material:
Polyoxymethylene (POM), PET-G, Foam 

 

 



MDA4LAP - Mounting Device Adaptor for Laptops

A simple but effective and easy-to-use extension for the Mounting Device; facilitates testing of larger devices (e.g., laptops, cameras, etc.) according to IEC 62209-2; lightweight and fits easily on the upper part of the Mounting Device in place of the phone positioner. The extension is fully compatible with the Twin SAM as well as ELI and other Flat Phantoms.

Material: Polyoxymethylene (POM), PET-G, Foam

 

Mounting Device for HAC testing

MD4HACV5 - Mounting Device for HAC testing

In combination with the HAC Arch Phantom, the Mounting Device for HAC testing enables accurate positioning of transmitters according to ANSI C63.19, TIA 1042, or other specifications.

Material: Polyoxymethylene (POM)

Mounting Devices Adaptor for Hands

MDA4SHO - Mounting Devices Adaptor for Hands

SHO Mounting Equipment (MDA4SHO) is an adaptor for the Mounting Device for Transmitters for use with the DASY system and Twin SAM phantom to enable SAR assessments with SHO hand phantoms. With MDA4SHO, users can evaluate the influence of the hand on the SAR results of a device under test.

The high-precision positioning equipment facilitates accurate and repeatable positioning of the transmitter in the SHO hand phantom as described in the SHO user manual according to the procedure standardized in the CTIA OTA Test Plan Rev. 3.x.

Material: Polyoxymethylene (POM)