Swissmade
cSAR3D
csarbanner4
4-Unit System

4-Unit cSAR3D System 

Description

The 4-unit cSAR3D System includes two flat phantoms for body-worn measurements (meeting both IEC and FCC specifications for tissue-simulating medium) and the left and right sides of the SAM head phantom, described in more detail below:

1 cSAR3D Flat HSL

  • Filling: Broadband Head Simulating Medium
  • including Calibration (650 MHz – 6 GHz)

1 cSAR3D Flat MSL

  • Filling: Broadband Body Simulating Medium
  • including Calibration (650 MHz – 6 GHz)

1 cSAR3D Left Head

  • Filling: Broadband Head Simulating Medium
  • including Calibration (650 MHz – 6 GHz)
  • Integrated Mounting Device for Hand-Held Transmitters, Left

1 cSAR3D Right Head

  • Filling: Broadband Head Simulating Medium
  • including Calibration (650 MHz – 6 GHz)
  • Integrated Mounting Device for Hand-Held Transmitters, Right

1 Set of Low Loss, Low Permittivity Masks for cSAR3D Left and Right Heads

  • 1 cSHL15MV3 - Left 15° Mask
  • 1 cSHR15MV3 - Right 15° Mask

2 Sets of Low-Loss, Low Permittivity Foam and Rugged Spacers for cSAR3D Flat

  • 1 cSF1SV5 - 1 mm Rugged Spacer
  • 2 cSF2SV5 - 2 mm Rugged Spacers
  • 1 cSF5SV5 - 5 mm Rugged Spacer and 1 cSF5SV4 - 5 mm Precise Foam Spacer
  • 1 cSF10SV5 - 10 mm Rugged Spacer and 1 cSF10SV4 - 10 mm Precise Foam Spacer
  • 1 cSF15SV5 - 15 mm Rugged Spacer and 1 cSF15SV4 - 15 mm Precise Foam Spacer

1 Tablet Positioner V2

1 Set of cSAR3D Verification Dipoles

  • 1 D835V2 - cSARD3D Verification Dipole, calibrated for HSL and MSL in Flat and HSL in Head Phantoms at 835 MHz
  • 1 D1950V3 - cSAR3D Verification Dipole, calibrated for HSL and MSL in Flat and HSL in Head Phantoms at 1950 MHz
  • 1 D2450V2 - cSAR3D Verification Dipole, calibrated for HSL and MSL in Flat and HSL in Head Phantoms at 2450 MHz
  • 1 D5GHzV2 - cSAR3D Verification Dipole, calibrated for HSL and MSL in Flat and HSL in Head Phantoms at 5.2 and 5.8 GHz
  • 1 cSAR3D Verification Dipole Spacer, 15 mm
  • 3 cSAR3D Verification Dipole Spacers, 10 mm

1 Set of Verification Accessories

  • 1 VMLV1 - Verification Mask for cSAR3D Left Head V1
  • 1 VMRV1 - Verification Mask for cSAR3D Right Head V1
  • 1 VAHV1 - Verification Antenna Holder for cSAR3D Heads V1
  • 1 VDSV1 - Verification Dipole Stand for cSAR3D Flat/Quad V1

1 Broadband Power Source for RF Sources containing:

  • 1 POWERSOURCE1 V1 - Broadband USB-fed source V1
  • 1 USB Cable
  • 1 Power-Bank Battery Module (including cable)

1 MAIA - Modulation and Audio Interference Analyzer (including USB cable)

1 ANT - Wideband Communication Antenna (including HF cable)

1 Desktop PC (including Color Monitor)

  • High-end specifications, CCC certification

1 cSAR3D Software V2.x and License

1 cSAR3D System Manual

4 cSAR3D Power Supplies with Power Cables

4 USB Cables