Swissmade
NEWS
MEASUREMENT

02/09/2021

Contact
info@speag.swiss

 

New API for MAGPy V1.0

Simple and powerful: The new application programming interface of MAGPy V1.0 allows the programming and easy integration in customer-specific applications in complex environments.

 
MEASUREMENT

27/07/2021

Contact
info@speag.swiss

 

Dielectric Material Database

SPEAG’s new dielectric database provides broadband material properties of our phantoms, liquids, and other materials used in our product lines

 
MEASUREMENT

01/07/2021

Contact
info@speag.swiss

 

DASY52 V10.4 Maintenance Update

SPEAG has released DASY52 V10.4 which can be downloaded from our website.

 
MEASUREMENT

17/06/2021

Contact
info@speag.swiss

 

MAGPy V1.0 Released – In Situ Compliance <10 MHz

SPEAG released MAGPy V1.0, our first high-end handheld system that empowers users to demonstrate compliance in the very close near field of wireless power transfer systems and other high-current industrial systems. MAGPy V1.0 meets all requirements of the latest draft of IEC PAS 63184:2021.

 
MEASUREMENT

18/05/2021

Contact
info@speag.swiss

 

First DASY8 System Shipped

DASY8, the 8th generation of our state-of-the-art DASY system is here! The most advanced scanning platform currently available now has increased modularity and flexibility and is easier to use. There is also good news for our DASY6 users as they will now also benefit from the latest advancements.

 
MEASUREMENT

05/05/2021

Contact
info@speag.swiss

 

Latest Decisions by Regulators

Governments in USA, Canada and Germany made statements in April on the adoption of the latest SAR measurement standards. 

 
MEASUREMENT

11/03/2021

Contact
info@speag.swiss

 

Revolutionary cSAR3D V5.0: Real-Time SAR for Advanced TAS

cSAR3D is now 10 times faster, measures and displays the specific absorption rate (SAR) three times per second, and offers validated measurements from 300 MHz – 10 GHz.

 
MEASUREMENT

12/01/2021

Contact
info@speag.swiss

 

DASY6 Module mmWave V2.2: Fully Compatible with IEC/IEEE 63195-1/-2 FDIS

SPEAG has released DASY6 Module mmWave V2.2 together with the MEO and API Options. Version 2.2 fulfills all requirements of the Final Draft of the IEC/IEEE 63195-1/-2 and offers the necessary features for MIMO testing and for testing automation above 6 GHz.

 
MEASUREMENT

06/01/2021

Contact
info@speag.swiss

 

MAGPy V1.0: The Only Instrument for Compliance Testing in the Near Field

SPEAG is delighted to announce the release of MAGPy V1.0, our first high-end handheld system that empowers users to demonstrate compliance in the very close near field of wireless power transfer systems and other high-current industrial systems. MAGPy V1.0 meets all requirements of the latest draft of IEC/IEEE63184 PAS.

 
MEASUREMENT

10/12/2020

Contact
info@speag.swiss

 

DAK-TL2 – New Technology Inside Our Dielectric Measurement System for Thin Layers

Breakthrough in computational electromagnetics by the IT’IS Foundation leads to SPEAG’s second-generation device for dielectric characterization of samples with limited size or volume.

 
MEASUREMENT

24/11/2020

Contact
info@speag.swiss

 

cDASY6 Module WPT Release – Our New MAGPy Technology for DASY6

SPEAG’s new cDASY6 Module WPT is the first-ever solution to demonstrate compliance with the basic restrictions of any magnetic source according to the latest IEC/IEEE63184 DPAS draft. The module is based on SPEAG’s new MAGPy product line.

 
MEASUREMENT

10/11/2020

Contact
info@speag.swiss

 

Use of DASY6 for Devices Operating at 6 – 10 GHz

In October, FCC issued new interim procedures for demonstrating compliance between 6 – 10 GHz. Just a few weeks later, we are happy to provide a scientifically rigorous solution that enables DASY6 users to meet these new requirements.

 
MEASUREMENT

01/09/2020

Contact
info@speag.swiss

 

cSAR3D V4.0: A Breakthrough in Array System Technology

With the release of cSAR3D V4.0, SPEAG introduces the novel X10 Combiner for high-resolution measurements. It enables SAR and absorbed power density testing from 6 – 10 GHz while also improving the overall measurement accuracy..

 
MEASUREMENT

18/08/2020

Contact
info@speag.swiss

 

cDASY6 Module WPT Pre-Release – Our New MAGPy Technology for DASY6

SPEAG’s new cDASY6 Module WPT is the first-ever solution to demonstrate compliance with the basic restrictions of any magnetic source according to the latest IEC/IEEE63184 DPAS draft. The module is based on SPEAG’s new MAGPy product line.

 
MEASUREMENT

29/07/2020

Contact
info@speag.swiss

 

mmWave ½SAM Phantoms Extend OTA Testing in CATR for 5G FR2 Devices

SPEAG releases the new mmW-½SAMR/L-V11 phantom packages for over-the-air testing at frequencies from 6 to >100 GHz.

 
MEASUREMENT

28/07/2020

Contact
info@speag.swiss

 

Publications Confirm: DASY6 is the Most Accurate SAR System

Scientific debate corroborates that SPEAG's DASY6 probe-scanning system has low measurement errors (<3%) for simple antennas and provides further support of the robustness of the latest IEC 62209 standard

 
MEASUREMENT

22/07/2020

Contact
info@speag.swiss

 

DASY6 and cSAR3D: Detailed Guidance for 5G NR FR1

Two new Application Notes provide detailed guidelines for testing 5G NR FR1 radios using DASY6 and cSAR3D. Also, SPEAG’s calibration lab just received ISO/IEC 17025 accreditation.

 
MEASUREMENT

18/06/2020

Contact
info@speag.swiss

 

cDASY6 Module SAR V6.14: Time-Efficient SAR Evaluation Thanks to Smart Zoom Scan

Smart Zoom Scan in cDASY6 Module SAR V6.14: Simplified and accelerated workflow for SAR compliance testing.

 
MEASUREMENT

15/06/2020

Contact
info@speag.swiss

 

mmWave THG-Phantom Package for OTA Tests of 5G NR F2 Devices

SPEAG releases the two-hand-grip phantom package and fixture optimized for OTA testing in compact mmWave chambers.

 
MEASUREMENT

06/05/2020

Contact
info@speag.swiss

 

cDASY6 Module SAR V6.12: Automate Your Testing Workflow

New application programming interface enables users to perform quicker, easier, and customized SAR compliance testing by automation of workflows.

 
MEASUREMENT

05/05/2020

Contact
info@speag.swiss

 

New Software Release DAK V2.6.1.1

We are pleased to announce the latest software release of our DAK product line, version 2.6.1.1. Along with our recent DAK-TL hardware upgrade, this important maintenance release further improves the accuracy and  repeatability of measurements with our DAK product line and extends the capability of high permittivity assessments with DAK-TL.

 
MEASUREMENT

08/02/2020

Contact
info@speag.swiss

 

Release of DASY52.10.4 Software Update

SPEAG announces release of the DASY52 software release with improved implementation of scanning requirements as per IEC 62209-2 amendment 

 
MEASUREMENT

21/01/2020

Contact
info@speag.swiss

 

EASY6 - DASY6 Technology for Any Setup

SPEAG’s EASY6 offers maximal flexibility, ease of use, and customized integration of SPEAG's E-/H-field, SAR, and temperature probes to help you achieve precision in your daily laboratory measurement tasks.

 
MEASUREMENT

13/01/2020

Contact
info@speag.swiss

 

New Notice by Canadian Government: Currently Not Adopting IEC 62209-3

The Canadian Government issued a Notice on January 8, 2020 clarifying its position on the acceptance of SAR measurement standards for wireless device certification. It has reviewed the new IEC 62209-3 standard and concluded that it is currently not adopting this standard.

 
MEASUREMENT

16/12/2019

Contact
info@speag.swiss

 

Release of cDASY6 Module mmWave V2.0.2

SPEAG announces the release of cDASY6 Module mmWave V2.0 maintenance release

 
MEASUREMENT

12/12/2019

Contact
info@speag.swiss

 

What to Expect After the Publication of IEC 62209-3

Recent Publication of IEC 62209-3 has Raised Questions and Renewed Interest in Regulatory Acceptance of Vector Measurement-Based Systems for SAR Compliance Testing.

 
MEASUREMENT

16/10/2019

Contact
info@speag.swiss

 

DASY6 V6.10 Packed with Innovation: SAR/PD at 6 – 10 GHz, 5G NR Signals, and Full FCC Acceptance

DASY6 V6.10 is the first system on the market that supports SAR measurements between 6 ‒ 10 GHz, estimates epithelial power density (IEEE) or transmitted power density (ICNIRP) values, and includes 5G NR signals.

 
MEASUREMENT

08/10/2019

Contact
info@speag.swiss

 

OH4VNA: Accurate and Reliable S11 Parameter Measurements of Mobile Device Antennas

Watch our latest video to learn how to measure accurately and reliably the reflection coefficient (S11) of mobile device antennas with SPEAG’s OH4VNA system.

 
MEASUREMENT

10/09/2019

Contact
info@speag.swiss

 

Entering a New World with cDASY6 Module mmWave V2.0

Two new powerful software packages in cDASY6 allow accurate power density compliance testing on the SAM phantoms for the first time.

 
MEASUREMENT

29/08/2019

Contact
info@speag.swiss

 

Specific Ankle Phantom for Dosimetric Evaluations

SPEAG’s new specific Ankle Phantom provides an easy-to-use solution for SAR certification of devices operating on or near the ankle.

 
MEASUREMENT

23/08/2019

Contact
info@speag.swiss

 

New Software Release DAK V2.6.0.5

We are pleased to announce the latest software release of our DAK product line, version 2.6.0.5. This important maintenance release further improves the accuracy, repeatability, speed, and user experience of measurements with our DAK/DAKS and DAK-TL systems.

 
MEASUREMENT

10/07/2019

Contact
info@speag.swiss

 

cSAR3D Major Release V3.0 - More Powerful & Accurate than Ever

cSAR3D V3.0 has an upgraded user interface, enhanced 3D field reconstruction algorithm, new features and on-the-fly measurement uncertainty based on the actual measured SAR data.

 
MEASUREMENT

06/06/2019

Contact
info@speag.swiss

 

Release of DASY52.10.2 Software Update

SPEAG announces release of the DASY52 software release with final implementation of scanning requirements as per IEC 62209-2 amendment 

 
MEASUREMENT

22/05/2019

Contact
info@speag.swiss

 

FCC Update on MAIA usage in cDASY6

We are pleased to announce that SPEAG received FCC's official confirmation on full acceptance of MAIA as well as further guidance on the reporting.

 
MEASUREMENT

20/05/2019

Contact
info@speag.swiss

 

Release of cDASY6 Module mmWave V1.6.2

SPEAG announces release of the intermittent cDASY6 Module mmWave V1.6.2.

 
MEASUREMENT

16/04/2019

Contact
info@speag.swiss

 

First Whole-Body Phantom WBBDuke for DASY6

With the release of whole-body back phantom WBBDuke, SPEAG’s DASY6 is ready to demonstrate SAR compliance in specific phantoms for any IoT devices.

 
MEASUREMENT

01/04/2019

Contact
info@speag.swiss

 

mmWAVE Phantom for DASY6 Systems

SPEAG released the mmWAVE phantom in direct response to the need for evaluating the power density distributions on any of the six faces of wireless devices.

 
MEASUREMENT

26/03/2019

Contact
info@speag.swiss

 

Update from FCC on 5G NR sub-6GHz NSA SAR Measurements

SPEAG is committed to continuously supporting and guiding the wireless industry through the rapid 5G development. 

 
MEASUREMENT

19/02/2019

Contact
info@speag.swiss

 

Release of cDASY6 Module mmWave V1.6

SPEAG released the cDASY6 Module mmWave V1.6 with many small but important new features that make compliance testing and documentation easier and faster.

 
MEASUREMENT

16/10/2018

Contact
info@speag.swiss

 

CTIA's ANKLE and CHEST Phantoms Released Ahead of Test Plan Release

Another addition to the SPEAG phantom family: we released two new highly-specialized electromagnetic phantoms for over-the-air certification of wireless devices ‒ the generic ANKLE and generic CHEST phantom! These phantoms were developed in close collaboration with CTIA's OTA working group and are expected to be included in the upcoming CTIA test plans.

 
MEASUREMENT

04/10/2018

Contact
info@speag.swiss

 

FCC News and IEC Meeting Report

New updates from IEC TC106 standardization in Stockholm, TCB Council Workshop in Baltimore, and FCC Laboratory in Columbia, MD

 
MEASUREMENT

02/10/2018

Contact
info@speag.swiss

 

cDASY6: Now More Robust, More Responsive, and Faster

SPEAG released cDASY6 V6.8 and cDASY6 Module mmWave V1.4. Both include important and long-awaited new features that not only greatly improve the user experience but also make our DASY6 system even faster with improved precision.

 
MEASUREMENT

12/09/2018

Contact
info@speag.swiss

 

Millimeter Wave Certification for 5G and Beyond: cDASY6 Module mmWave V1.4, V2.0, V3.0, and V4.0

SPEAG Releases Its Roadmap Towards an Innovative, Robust, and Comprehensive Toolset for Demonstrating Compliance with Current and Future Safety Guidelines and Regulatory Requirements > 6 GHz.

 
MEASUREMENT

21/08/2018

Contact
info@speag.swiss

 

Customized Phantoms with Unique Use-Factors Accelerate the Development & Testing of Wireless Devices

SPEAG has established a fast, reliable, and cost-effective workflow for development and manufacturing of any customized electromagnetic phantom that provides representative and repeatable testing.

 
MEASUREMENT

14/08/2018

Contact
info@speag.swiss

 

New DASY Software Feature: Improved Precision for Capacitive Coupled Sources Ahead of Standardization

In line with the upcoming IEC 62209-2 amendment release, SPEAG once again sets the benchmark by providing the solution to measure transmitters in touch with a phantom with maximum precision.

 

 
MEASUREMENT

07/08/2018

Contact
info@speag.swiss

 

New Software Release DAK Version 2.4.1.202

We are pleased to announce the release of DAK software version 2.4.1.202. Based on the valuable feedback from our rapidly growing customer base, this important maintenance release further improves the accuracy, repeatability, and user experience of measurements with our DAK product line.

 

 
MEASUREMENT

10/07/2018

Contact
info@speag.swiss

 

Release of Optical Head for Vector Network Analyzers

SPEAG is proud to announce the release of OH4VNA - a miniaturized optical head for cable-free testing of electrically small antennas between 500 MHz – 6 GHz.

 
MEASUREMENT

03/07/2018

Contact
info@speag.swiss

 

Communication Systems Update

Updated communication system summary for usage with DASY6 and cSAR3D.

 

 
MEASUREMENT

26/06/2018

Contact
info@speag.swiss

 

POPEYE-V10: Just Like a Human but Stronger and Consistent

SPEAG is proud to introduce POPEYE Version 10, our redesigned electromagnetic human body phantom that introduces striking new details in addition to its main features.

 
MEASUREMENT

12/06/2018

Contact
info@speag.swiss

 

Release of New OTA Phantom Series for 5G and IoT

SPEAG released a new generation of phantoms covering the entire frequency range from 3 GHz to over 100 GHz. The solution is both simple and elegant and improves the surface quality and sustainability of the phantoms.

 
MEASUREMENT

06/06/2018

Contact
info@speag.swiss

 

5G Module V1.2: Offering More Automation, Features and Speed

Power density compliance testing has never been easier: SPEAG’s latest software release, Version 1.2 of our 5G Module, is yet another step forward in our drive to provide you with even more automated and more versatile tools for analysis and assessment of compliance at frequencies above 10 GHz!

 
MEASUREMENT

11/04/2018

Contact
info@speag.swiss

 

cDASY6 V6.6 – Ready for IoT Compliance Testing

SPEAG released cDASY6.6 which is fully compatible with IEC 62232 and the voting drafts of IEC 62209-U / IEC 62209-3 and from which DASY6 customers can benefit with immediate effect.

 
MEASUREMENT

13/02/2018

Contact
info@speag.swiss

 

cDASY6.6 Beta-Release

Ahead of the official release of cDASY6.6 on March 6, 2018, SPEAG has made a Beta version available for early adopters. cDASY6.6 includes many striking features, such as the full integration of specific phantoms, and the Fast Volume Scan.

 
MEASUREMENT

06/02/2018

Contact
info@speag.swiss

 

cSAR3D-A: Fully Automated SAR Testing

cSAR3D-A Version 1 combines the most reliable vector-based array system cSAR3D with the precision robot of DASY6. It enables fully automated SAR evaluations with thousands of single SAR measurements - with only one click.

 
MEASUREMENT

05/12/2017

Contact
info@speag.swiss

 

Communication Systems Update

Updated communication system summary for usage with DASY6 and cSAR3D.

 

 
MEASUREMENT

06/11/2017

Contact
info@speag.swiss

 

Updates from IEC TC 106 Meetings and TCB Council Workshop

At the recent IEC TC 106 meetings in Melbourne and the TCB Council Workshop in Baltimore, major milestones towards the regulatory and standards acceptance of EM exposure assessment of emerging wireless devices were presented.

 
MEASUREMENT

31/10/2017

Contact
info@speag.swiss

 

cSAR3D: The Only Vector SAR System to Fully Meet the Demanding Requirements of IEC 62209-3

Recent tests from independent laboratories have shown that cSAR3D meets the stringent requirements of draft IEC 62209-3. All evaluated cSAR3D systems pass the validation protocol.

 
MEASUREMENT

24/10/2017

Contact
info@speag.swiss

 

The first FCC-type certification of a 60 GHz WiGig module granted on the basis of assessment with SPEAG’s unique 5G test system

The FCC has recently granted the first RF exposure type approval for a WiGig embedded wireless communication module. Compliance with FCC limits was demonstrated with SPEAG’s 5G solution.

 
MEASUREMENT

17/10/2017

Contact
info@speag.swiss

 

System Check and Validation Sources for 5G Now Available from 10 – 110 GHz

Last milestone in instrumentation for smooth 5G certification achieved.

 
MEASUREMENT

26/09/2017

Contact
info@speag.swiss

 

Release of ICEy-mmW Module V1.0

SPEAG is proud to announce the ICEy-mmW Module Release V1.0, featuring highly automated, contactless testing of power density compliance of 5G and WiGig devices with micrometer precision.

 
MEASUREMENT

29/08/2017

Contact
info@speag.swiss

 

New 106/410/DPAS published for vector measurement-based SAR testing systems (frequency range 30 MHz – 6 GHz)

A DPAS (Draft Publicly Available Specification) of Part 3 of the IEC standard 62209, which will allow the use of standardized fixed sensor array systems in addition to robot-based scanning systems, has been submitted for IEC approval.

 
MEASUREMENT

24/08/2017

Contact
info@speag.swiss

 

IT'IS at ICES TC95 Meeting in Rosslyn, VA, 14-16 Aug 2017

In August 2017, the International Committee on Electromagnetic Safety (ICES) Technical Committee 95 held their bi-annual meeting in Rosslyn, VA, to update electromagnetic exposure standards.

 
MEASUREMENT

08/08/2017

Contact
info@speag.swiss

 

cDASY6 5G Module Release V1.0

SPEAG is proud to announce cDASY6 5G Module Release V1.0, featuring reduced scan time, automated evaluation of several planes, and a simplified user-interface.

 
MEASUREMENT

01/08/2017

Contact
info@speag.swiss

 

Communication Systems Update

Updated communication system summary for usage with DASY6 and cSAR3D.

 

 
MEASUREMENT

22/06/2017

Contact
info@speag.swiss

 

cDASY6 Release V6.4

SPEAG is happy to announce the release of cDASY6 V6.4. With V6.4, the greatly reduced measurement time and the testing automatization of our DASY6 system is now accepted by all regulators. The release also entails all necessary features to meet the upcoming unified IEC 62209-U standard and is capable of testing all IoT devices.

 
MEASUREMENT

06/06/2017

Contact
info@speag.swiss

 

cDASY6 acceptance by FCC

Update from the TCB Council Workshop in Baltimore (2-4 May 2017).

 
MEASUREMENT

05/06/2017

Contact
info@speag.swiss

 

IEC TC106 Meeting Update

IEC Standards TC106, implementing innovative solutions for electromagnetic exposure assessment, have moved towards publication. SPEAG is well positioned to satisfy the needs of these new standards.

 
MEASUREMENT

30/05/2017

Contact
info@speag.swiss

 

Commercial Release of IEC 62209-3 Validation Antennas

Validation sources enable independent evaluation of the performance of specific absorption rate (SAR) measurement systems, in accordance with draft IEC 62209-3.

 
MEASUREMENT

17/05/2017

Contact
info@speag.swiss

 

Major cDASY6 Release: V6.4

SPEAG is announcing the Beta-Release of cDASY6.4 that offers a multitude of assets and improvements, expanding the existing capabilities of DASY52. At the same time, it is already fully compatible with the upcoming standard IEC 62209-U. The final release will become available on June 20th, 2017.

 
MEASUREMENT

10/05/2017

Contact
info@speag.swiss

 

5G Module Beta Release

New Beta-version enables power density compliance testing as close as 2 mm from any surface with minimal uncertainty.

 
MEASUREMENT

25/04/2017

Contact
info@speag.swiss

 

UL Invests Into More Effective SAR Testing

PC World has published a video by Underwriters Laboratories Inc. (UL) last week demonstrating their latest fleet of DASY6 systems.

 
MEASUREMENT

18/04/2017

Contact
info@speag.swiss

 

SAR Compliance Testing of Wireless Devices with Time-Averaged Power Control

A user video demonstrates the new time-averaged SAR feature of cDASY6 V6.4.

 
MEASUREMENT

13/04/2017

Contact
info@speag.swiss

 

cSAR3D is the Chosen Solution in Egypt

A cSAR3D system was recently delivered and installed at the Egyptian National Telecom Regulatory Authority in Cairo.

 
MEASUREMENT

04/04/2017

Contact
info@speag.swiss

 

SPEAG’s & CTIA’s New Forearm Phantom SHO-GFPC-V1

Standardized Over-The-Air (OTA) evaluation of wrist-worn devices in a precise and repeatable fashion.

 
MEASUREMENT

14/03/2017

Contact
info@speag.swiss

 

New OTA Phantom Optimized for Testing Head-Mounted Wearables

SPEAG’s new OTA phantom SAM V4.6BSE provides maximum flexibility for testing wearable devices mounted to the head.

 
MEASUREMENT

07/03/2017

Contact
info@speag.swiss

 

Quick cSAR3D Measurement of Wireless Device

Fast SAR measurements are easier than ever! Watch a new user video demonstrating the features of cSAR3D V2.8.

 
MEASUREMENT

28/02/2017

Contact
info@speag.swiss

 

cSAR3D Measurements in Great Demand

China Telecommunication Technology Labs-Terminals (CTTL-Terminals), China’s premier wireless testing authority, is now routinely applying SPEAG’s vector measurement-based array system cSAR3D for pre-compliance evaluations of wireless devices for several of China’s manufacturers.

 
MEASUREMENT

25/02/2017

Contact
info@speag.swiss

 

Brief Update: IEC 62209 Standard Meeting Exceeds Expectations

cSAR3D closes the gap between innovation and Compliance.

 
MEASUREMENT

21/02/2017

Contact
info@speag.swiss

 

New Holder Adaptor Eliminates All Steps on Testing Its Influence on SAR

The new low-loss low-permittivity adaptor eliminates all steps on testing the holders influence on SAR measurements.

 
MEASUREMENT

02/02/2017

Contact
info@speag.swiss

 

Making Waves: Revolutionary Probe for 5G

The novel EUmmWV2 probe enables precise very close near-field measurements for frequencies up to 110 GHz.

 
MEASUREMENT

27/01/2017

Contact
info@speag.swiss

 

cSAR3D Cal Lab

SPEAG invests in the future of dry SAR testing systems: New standards drive dedicated Cal Lab

In order to comply with the requirements of the upcoming IEC 62209/ Part 3 SAR testing standards, SPEAG has set up a dedicated laboratory for calibrating ‘dry’ SAR testing systems at their manufacturing facility located in the heart of Zurich. The laboratory complements their already existing and well-established ‘wet’ SAR system service centre.

 
MEASUREMENT

10/01/2017

Contact
info@speag.swiss

 

New Free-Space Probes for Precise Near-Field Characterization from 4 – 30 MHz

Novel magnetic and electric field probes suited for precise measurements in the closest vicinity of WPT systems or other sources operating in the low MHz range.

 
MEASUREMENT

29/12/2016

Contact
info@speag.swiss

 

cSAR3D Release V2.8

In response to several user requests, SPEAG has added a quick and intuitive measurement setup feature to its cSAR3D software that is optimal for quick & easy measurements as needed in R&D applications or for special analyses. A new remote interface now provides an exceptional level of convenience for QA testing by allowing sites to use their own automated test software and analysis tools, and extending scalability to multi-site environments.

 
MEASUREMENT

07/12/2016

Contact
info@speag.swiss

 

New DAK-TL Demonstration

Watch our recent product video demonstrating the latest advancement of our Dielectric Assessment Kit product line. DAK-TL brings automated precise measurements of dielectric permittivity, conductivity and homogeneity of boards, sheets, foils and small samples of tissues or liquids to your bench – giving you results in seconds.

 
MEASUREMENT

17/11/2016

Contact
info@speag.swiss

 

DASY6 and cSAR3D Regulatory Acceptance: SAR Standards Move Forward

SPEAG is very happy to provide you with an update of the IEC 106 Standard Meetings in Hangzhou, China, together with exciting new data regarding the performance and regulatory acceptance of DASY6 and cSAR3D.

 
MEASUREMENT

02/11/2016

Contact
info@speag.swiss

 

User Video Shows Unrivaled Repeatability of cSAR3D Fast SAR Test System

User Video Shows Unrivaled Repeatability of cSAR3D Fast SAR Test System

 
MEASUREMENT

05/08/2016

Contact
info@speag.swiss

 

cSARD6 – Taking SAR Measurements to the Next Level

SPEAG is pleased to announce the release of cSARD6 in Q4 2016, the smart SAR testing solution. cSARD6 integrates cSAR3D with DASY6 and adds new features to create a fully automated and powerful SAR compliance system. This is the most advanced SAR measurement system available today, combining speed and versatility, while maintaining full SAR testing capabilities and compatibility to any of the worldwide standards.

 
MEASUREMENT

13/07/2016

Contact
info@speag.swiss

 

cSAR3D V2.6 Release - Faster Automation

Our new cSAR3D software release 2.6 features a further improved reconstruction algorithm, more precise determination of the peak spatial SAR close to the border of the sensor array, and faster and more reliable handovers of 2G, 3G and 4G signals. We are also pleased to announce that this quarter we are releasing both automated testing of devices with dynamic antenna tuners and autonomous DUT positioning based on DASY robots with integrated camera and device charger. 

 
MEASUREMENT

01/07/2016

Contact
info@speag.swiss

 

ISO/IEC 17025 Accreditation for Calibration

ISO/IEC 17025 Accreditation for Calibration of probes & validation sources extended down ot 4 MHz and Calibration of dielectric materials awarded

 
MEASUREMENT

31/03/2016

Contact
info@speag.swiss

 

DASY Measurement Protocol for Capacitively Coupled SAR Distribution

SPEAG recommends an updated measurement protocols for compliance testing with DASY52 to account for new technology trends and regulator requirements. cDASY6 will have a more advanced automated approach.

 
MEASUREMENT

21/03/2016

Contact
info@speag.swiss

 

Chinese OTA Hand Phantoms

Release of the first Chinese OTA hand phantom developed in collaboration with HWA-Tech for the Chinese Academy of Broadcasting Planning (ABP).

 
MEASUREMENT

23/02/2016

Contact
info@speag.swiss

 

Still Groovin’ to the E-Field Probe Blues by Prof. Howard Bassen

The first paper to describe the design and fabrication of a miniature broad-band electric field probe was published more than 40 years ago in the Annals of the New York Academy of Sciences, Biological Effects of Nonionizing Radiation.

 
MEASUREMENT

10/02/2016

Contact
info@speag.swiss

 

Anritsu MT8820C Integrates with DASY6 and cSAR3D

Anritsu Corporation’s MT8820C Radio Communication Analyzer now integrates with both DASY6 and cSAR3D from Schmid & Partner Engineering AG (SPEAG) to provide seamless Specific Absorption Rate (SAR) compliance testing that significantly reduces assessment costs and maximizes flexibility.

 
MEASUREMENT

06/02/2016

Contact
info@speag.swiss

 

Notice: Limited warranty on phantoms

Important notice to avoid shell degradation of SPEAG phantoms due to exposure to aggressive liquids.

 
MEASUREMENT

04/11/2015

Contact
info@speag.swiss

 

SPEAG Strongly Recommends Regular Recertification of OTA Hand Phantoms

On the basis of careful investigation of used hand phantoms that have been returned to our labs, SPEAG strongly recommends recertification of all SHO hand phantoms after at most 3 years of use or in the case of any visible damage.

 
MEASUREMENT

26/10/2015

Contact
info@speag.swiss

 

DAKS-12, SPEAG’s New Portable DAK System for Lower Frequencies

SPEAG is pleased to announce the release of our latest portable dielectric measurement system, the DAKS-12, which combines SPEAG’s DAK-12 probe with a handheld single-port ShockLine MS46121A vector network analyzer from Anritsu. The easy-to-use DAKS-12 is designed for very robust dielectric measurements in the frequency range of 10 MHz – 3 GHz.

 
MEASUREMENT

23/10/2015

Contact
info@speag.swiss

 

Review of Fast SAR in Microwave RF Technology China

SPEAG products cSAR3D and DASY6 are featured in a recent issue of Chinese journal Microwave and Radiofrequency Technology. 

 
MEASUREMENT

04/10/2015

Contact
info@speag.swiss

 

cSAR3D V2.4 Release - Reduced Uncertainty

SPEAG continues to advance the state of the art for precise and fast SAR measurement with the release of cSAR3D V2.4. The implementation of new calibration techniques and reconstruction algorithms has significantly improved the measurement accuracy. Modulation analysis and standards-compatible fast SAR protocols are also new in this release.

 
MEASUREMENT

01/09/2015

Contact
info@speag.swiss

 

DAK Verification Kit

In response to numerous customer requests, SPEAG has developed the DAK Verification Kit for quick and easy verification of the Dielectric Assessment Kit system. The characterized liquid in the Verification Kit will be measured and compared to the imported target data after system calibration, ensuring reliable performance and results.

 
MEASUREMENT

24/06/2015

Contact
info@speag.swiss

 

Successful Presentation of Innovative SAR Measurement in UK

The future of SAR measurement technology was on full display on June 11 at an open forum organized by UL in Basingstoke, UK called “New Innovation SAR Measurement Using Array Systems”. Prominently featured at the event was a live demonstration of cSAR3D, SPEAG’s real-time SAR measurement system. The IT’IS Foundation summarized the groundbreaking research work that defined SAR measurement technology and is driving new innovations for the future.

 
MEASUREMENT

31/05/2015

Contact
info@speag.swiss

 

Award for the Best Symposium Paper at the APEMC2015 Conference to the Developers of the ICEy and TDS Technologies

Our paper “EMC/EMI Near-field Testbed for EM Phasor Measurements Using Active Optical Sensors,” featuring the latest research in near-field EMC/EMI scanning technologies implemented in SPEAG’s TDS and ICEy systems, was awarded the Best Symposium Paper Award at the 2015 Asia-Pacific International EMC Symposium in Taipei, Taiwan.

 
MEASUREMENT

18/05/2015

Contact
info@speag.swiss

 

DAK Software v2.0 Release

SPEAG is proud to announce the release of DAK software v2.0. Based on customer feedback and our focused expertise, the software was  completely rewritten with our own advanced software development kit (SDK) to offer a more open and flexible structure, a greater user experience, and improved functionality, while retaining the same look and feel.

 
MEASUREMENT

28/04/2015

Contact
info@speag.swiss

 

SMC (Sensor Model Calibration) Release

The novel SMC Sensor Model Calibration is a breakthrough in signal independent calibration of electromagnetic linearized over a large dynamic range.This new technique increases the flexibility of the end-user and reduces calibration costs while maintaining a low measurement uncertainty.

 
MEASUREMENT

20/04/2015

Contact
info@speag.swiss

 

Microphotonic Ultra-Wideband RF-over-Fiber Transducer

SPEAG is excited to announce the launch of a novel product in our TDS lineup – the fully electrically isolated RF-over-Fiber Transducer (RFoF1P). With this new product, SPEAG continues to extend the frontiers of accurate and traceable RF measurements powered by micro-photonic technologies to applications such a conducted EMC/EMI, ESD, antenna correlation and signal integrity measurements as well as to highly immune signal and power links for ultra-low-noise and ultra-wideband transmissions.

 
MEASUREMENT

20/04/2015

Contact
info@speag.swiss

 

PXI TDS Remote Unit

SPEAG is proud to announce the launch of another member in our TDS lineup – the PXI (PCI eXtensions for Instrumentation) version of the TDS Remote Unit. With this new product SPEAG brings accurate and traceable RF measurements powered by micro-photonic technologies to modular instrumentation.

 
MEASUREMENT

07/04/2015

Contact
info@speag.swiss

 

TDS SNI, a New Line of EMC Sniffing Probes

SPEAG is excited to announce the release of the latest addition to our TDS product family – the TDS SNI probe. With TDS SNI, SPEAG pioneers the use of photonics for accurate and traceable RF measurements in EMC/EMI sniffing applications, bringing the functionality of a benchtop spectrum analyzer to the tip of miniature electrically isolated electric and magnetic field probes.

 
MEASUREMENT

31/03/2015

Contact
info@speag.swiss

 

cSAR3D and cDASY6 Features - Your Feedback is Important to Us

The response we have received on cSAR3D and cDASY6 products has been outstanding, and we would like your help in prioritizing features for the next software release. Please take our confidential survey: https://www.surveymonkey.com/s/ZX53R2N.

 
MEASUREMENT

18/03/2015

Contact
info@speag.swiss

 

BIS Adopts the Indian Standard for Mobile Phone Handsets: Safety Requirements: IS16333 (Part 1):2015

BIS, the National Standards Body of India, has adopted Standard IS16133 (Part1):2015.

 
MEASUREMENT

16/03/2015

Contact
info@speag.swiss

 

cSAR3D V2.0 Release

The innovation continues with SPEAG's release of cSAR3D V2.0. This release fully integrates all cSAR3D phantom types: Flat, Left Head, Right Head and Quad. Shipments of cSAR3D Quad started in November 2014 and have far exceeded our expectations. SAR measurement of simultaneous transmisson is supported, as is base station simulator automation with both CMU200 and CMW500 from Rohde & Schwarz.

 
MEASUREMENT

23/02/2015

Contact
info@speag.swiss

 

 
MEASUREMENT

15/02/2015

Contact
info@speag.swiss

 

Progress for IEC 62209-3 Standard in San Francisco

Significant progress at recent IEC 62209-3 meeting in San Francisco resulted in agreement on broad acceptance of vector array systems such as cSAR3D, and rigorous protocols for validation and uncertainty.

 
MEASUREMENT

16/01/2015

Contact
info@speag.swiss

 

cSAR3D Quad Release

cSAR3D Quad is ideal for fast and accurate SAR testing of laptops, tablets and other large devices. In November and December 2014, several cSAR3D Quad systems were shipped and installed at customer sites, with many more scheduled to ship in early 2015. SPEAG is very pleased with the popularity and initial demand for cSAR3D Quad among our customers. 

 
MEASUREMENT

15/11/2014

Contact
info@speag.swiss

 

Special Discount for iSAR to cSAR3D

We are pleased to offer an attractive discount for the upgrade of iSAR to cSAR3D. cSAR3D meets the advancing needs of customers for fast and high-precision SAR testing. 

 
MEASUREMENT

28/10/2014

Contact
info@speag.swiss

 

ICEy (Interference & Compatibility Evaluation System) Release

SPEAG is excited to announce the introduction of our novel ICEy Interference & Compatibility Evaluation system, another decisive leap forward in EMC/EMI near-field scanning technology.

 
MEASUREMENT

17/10/2014

Contact
info@speag.swiss

 

ISO/IEC 17025 Accreditation for Calibration

ISO/IEC 17025 Accreditation for Calibration of cSAR3D and TDS Awarded!

 
MEASUREMENT

16/08/2014

Contact
info@speag.swiss

 

cSAR3D Demo Video and Accreditation & Software Release Schedule

With the steady shipment of one cSAR3D FLAT unit per week successfully underway, SPEAG is now ready to ramp up cSAR3D HEAD production with the goal of also shipping three to four calibrated HEAD units per month. A demo video highlighting the exceptional functionality and user-friendliness of the system, including the new camera modules, is now available.

 
MEASUREMENT

14/07/2014

Contact
info@speag.swiss

 

cSAR3D V1.2 Release

SPEAG is pleased to announce the release of cSAR3D software version 1.2.  New features include improved 3D extrapolation, continuous measurement mode, and several enhancements of the graphical user interface. We are in full production with deliveries of two to four units per month.

 
MEASUREMENT

03/07/2014

Contact
info@speag.swiss

 

New DAK Software Version 1.12

SPEAG is delighted to announce the latest release of our DAK software, Version 1.12. The new and improved features and tools of this release accelerate dielectric measurements and optimize data evaluation.

 
MEASUREMENT

23/05/2014

Contact
info@speag.swiss

 

New POPEYE Movie

New Video Demonstrating Features and Use of POPEYE.

 
MEASUREMENT

08/05/2014

Contact
info@speag.swiss

 

DASY52.8.8 and SEMCAD X V14.6.10 Software Release

SPEAG is pleased to announce the release of DASY52.8.8 (1222) and SEMCAD-X V14.6.10 (7331). 

 
MEASUREMENT

10/04/2014

Contact
info@speag.swiss

 

DAKS – Dielectric Measurements Made Easier

SPEAG is delighted to announce the release of an improved version of the Dielectric Assessment Kit System (DAKS). With a longer probe and a dedicated trigger button, the new DAKS makes dielectric measurements easier than ever.

 
MEASUREMENT

26/02/2014

Contact
info@speag.swiss

 

SAM-Mask 6 degrees V2

SPEAG Launches New and Improved SAM-MASK 6 DEGREES V2

 

 

 
MEASUREMENT

10/12/2013

Contact
info@speag.swiss

 

cSAR3D Production Release

SPEAG is excited to announce the series production of cSAR3D, the next generation in fast and high-precision SAR measurement equipment. We will start shipping in January, increasing to two full cSAR3D systems per month during Q1 2014. In January, we will also have available our extensive cSAR3D performance evaluation and DASY52 comparison study of over 40 wireless devices of different  manufacturers. More information is now available on our product page.

 
MEASUREMENT

21/11/2013

Contact
info@speag.swiss

 

New Product: Hand-Forearm Phantom

SPEAG Announces Release of New Hand-Forearm Phantom for Wrist-Mounted Devices

 
MEASUREMENT

01/11/2013

Contact
info@speag.swiss

 

New DAKS Training Videos

Learn more about the newest addition to our dielectric spectroscopy product line, Dielectric Assessment Kit System (DAKS), in these short videos. The first video describes the advantages and usage of this portable and compact system. The second video offers a simple, step-by-step guide on how to install and operate the system.

 
MEASUREMENT

06/09/2013

Contact
info@speag.swiss

 

New SAR Measurement Standard Published

A new international standard for SAR measurements, IEEE 1528-2013, was published on 6 September, incorporating new procedures to improve testing efficiency while maintaining excellent measurement reproducibility and low uncertainty.

 
MEASUREMENT

04/09/2013

Contact
info@speag.swiss

 

Confined Loop Antenna (CLA) 30 MHz - 220 MHz

Confined loop antenna (CLA) are system validation antennas for the system checks with tissue simulating media at frequencies below 300 MHz.

 
MEASUREMENT

08/07/2013

Contact
info@speag.swiss

 

DAKS – Dielectric Measurements Have Never Been So Easy

SPEAG is delighted to announce the release of its latest innovation: a low-cost, portable, and easy-to-use Dielectric Assessment Kit System (DAKS) covering the frequency range between 200 MHz – 14 GHz.

 
MEASUREMENT

01/06/2013

Contact
info@speag.swiss

 

ANSI/AAMI PC69 (2007) Implant EMC Dipoles (450 – 3000 MHz)

A set of new dipoles has been developed for electromagnetic compatibility testing of active implantable medical devices according to ANSI/AAMI PC69-2007.

 
MEASUREMENT

11/04/2013

Contact
info@speag.swiss

 

DASY52.8.6 and SEMCAD X V14.6.9 Software Release

SPEAG is pleased to announce the release of DASY52.8.6 (1115) and SEMCAD-X V14.6.9 (7117). 

 
MEASUREMENT

28/03/2013

Contact
info@speag.swiss

 

New DAK Movie

Release of a brief training video with tips on how to increase the precision of dielectric measurements.

 
MEASUREMENT

14/03/2013

Contact
info@speag.swiss

 

TDS (Time Domain Sensor) Release*

We are pleased to announce the release of our TDS Standalone systems. TDS Standalone is the first product of our growing TDS product range to employ SPEAG’s novel active optical sensor technology for E- and H-field measurements in the frequency range from 10 MHz – 6 GHz.

*available in the US and Canada after final certification in accordance with the regulations of the US FDA, CDRH, CFR 21, Section I, subchapter J, part 1002 to 1040.11 (expected in May 2013).

 
MEASUREMENT

04/03/2013

Contact
info@speag.swiss

 

Solid Spacer V2

We are pleased to announce the release of the optimized spacers SPACERS V2 for our CTIA hand phantoms SHO X.

 

 
MEASUREMENT

25/02/2013

Contact
info@speag.swiss

 

New Product: POPEYE

In response to customer requests for more versatile phantoms, SPEAG introduces several new whole-body and hand phantoms.

 
MEASUREMENT

11/02/2013

Contact
info@speag.swiss

 

DAK-1.2 Release & Software Update

We are pleased to announce the release of the optimized high frequency dielectric probe DAK-1.2 covering the frequency range 5 – 50 GHz. At the same time, we extended and improved the features of our software that is now available for download. 

 
MEASUREMENT

14/01/2013

 

Audio Interference Analyzer (AIA)

This AIA enables the DASY52 Users to directly measures the Modulation Interference Factor (MIF) and the Probe Modulation Factor (PMF) of modulated radiofrequency (RF) signals. It is also perfectly suited for establishing the connection between base-station emulator and the device under test (DUT). 

 
MEASUREMENT

05/09/2012

Contact
info@speag.swiss

 

iSAR V2.6 Software Release

SPEAG is pleased to announce a new software release iSAR V2.6 that further improves repeatability, absolute accuracy and user friendliness of iSAR Flat, Head and Quad. In the next release, we also plan to include novel features that we are currently developing for cSAR3D.

 
MEASUREMENT

07/08/2012

Contact
info@speag.swiss

 

DASY52.8.2 and SEMCAD X V14.6.6 Software Release

SPEAG is pleased to announce the release of DASY52.8.2 (969) and SEMCAD-X V14.6.6 (6824). It took us slightly longer than promised for this release, however we not only removed the reported bugs but also added new features which will ease the daily usage of our DASY system as well as provide even better compatibility with current and upcoming compliance standards. In particular, we support our new MIF box, support the creation of SAR compliance reports and we improved the interface to the CMW500. In addition, the DAK team added two new videos to our webpage.

 
MEASUREMENT

02/08/2012

Contact
info@speag.swiss

 

New Phantom Products

In response to customer requests for more versatile phantoms, SPEAG introduces several new whole-body and hand phantoms.

 
MEASUREMENT

18/07/2012

Contact
info@speag.swiss

 

DAK Software Release

We are pleased to announce the latest DAK Software which is more flexible and versatile than the previous version.

 
MEASUREMENT

11/07/2012

Contact
info@speag.swiss

 

France Enforces SAR Requirements in Limbs

Recent information has been issued by the French government that wireless devices must comply with SAR limits in the limbs and hands. DASY52 is fully compatible with all testing requirements and international measurement standards. SAR phantoms and tissue equivalent liquids are available from SPEAG.

 
MEASUREMENT

25/05/2012

Contact
info@speag.swiss

 

Next Generation 3D Compliance SAR Systems - cSAR3D

SPEAG is pleased to introduce the next generation in fast, high-precision Compliance SAR (cSAR3D) Systems, a system concept that had been developed during the last months to meet the various requests/suggestions of our highly valued customers.

 
MEASUREMENT

23/04/2012

Contact
info@speag.swiss

 

DAK Frequency Extension

We are pleased to announce that the frequency range of DAK has been extended.  A novel algorithm has been implemented that extends the dielectric measurement capability of the DAK-12 Probe to 10 MHz - 5 GHz.

 
MEASUREMENT

23/12/2011

Contact
info@speag.swiss

 

Advance Notice: Next Generation of Probe Systems – TDS

We are proud to announce a breakthrough in EM probe systems. The Time-Domain-Sensor (TDS) is the basis of our novel product line of high-performance active optical radio-frequency field sensor systems. The TDS concept allows the measurement of the full complex vectorial EM field distribution (amplitude and phase) in the time and frequency domains. First TDS probes for E- and H-field measurements in the 10MHz to 6GHz frequency range will become available in the next quarter.

 
MEASUREMENT

22/12/2011

Contact
info@speag.swiss

 

DAK Release

Our first DAK shipments were made to customers in December. We are very pleased about the successful launch and strong customer interest in this new product line for high-precision dielectric measurements. Expansion of the frequency range and applications for the DAK product line will continue in 2012.

 
MEASUREMENT

09/12/2011

Contact
support@speag.swiss

 

iSAR Calibration Lab in Korea

SPEAG and Dymstec are delighted to announce the opening of the joint SPEAG Calibration Laboratory Korea, Inc. The laboratory is now fully operational and completed its first iSAR calibrations this month. iSAR calibration is performed using the same high-quality equipment and procedures as the SPEAG iSAR calibration laboratory in Zurich, with the additional benefit of much faster iSAR calibration service for many Asian customers.

 
MEASUREMENT

19/10/2011

Contact
info@speag.swiss

 

New Product: DAK (Dielectric Assessment Kit)

DAK is our new product line for high-precision dielectric measurements. Our probes are optimized for precision, robustness and ease of use. The software is flexible and operates with the most popular network analyzers on the market. The DAK system is calibrated by our ISO/IEC 17025 accredited laboratory.

 
MEASUREMENT

20/06/2011

Contact
info@speag.swiss

 

iSAR Quad Release

iSAR Quad is officially released! iSAR Quad is the largest and highest-resolution iSAR available. iSAR Quad is well suited for scanning laptops, tablet computers and other large devices. It also improves the precision for SAR evaluations of devices operating above 3 GHz. We provide an upgrade option from iSAR Flat to iSAR Quad.

 
MEASUREMENT

25/05/2011

Contact
info@speag.swiss

 

DASY52 V6.2 and SEMCAD X V14.4.5 Software Release

The DASY team is pleased to announce the release of DASY52 V6.2 (482) and SEMCAD-X V14.4.5 (3634). We recommend the immediate installation of this upgrade as it addresses reported bugs and various minor requests/ suggestions by our customers.

 
MEASUREMENT

22/04/2011

Contact
info@speag.swiss

 

Improved Broad-Band Liquids

SPEAG completed its development of greatly improved head and body tissue simulating liquids for the frequencies from 3500 to 5800 MHz. This new broad-band liquids are within ±5% to the target values and provide significantly improved long-time stability and reduction of the maintenance efforts. Therefore, they lower costs and improve reproducibility of the test results.

 
MEASUREMENT

14/04/2011

Contact
info@speag.swiss

 

iSAR Quad pre-release

iSAR Quad is the largest and highest-resolution iSAR available. iSAR Quad is capable of scanning a 600 mm x 400 mm planar area with a 1 mm resolution, making it well suited for scanning laptops, tablet computers and other large devices. 

 
MEASUREMENT

15/03/2011

Contact
info@speag.swiss

 

Golden Validation Device

The Golden Validation Device is a very stable, reliable and easy-to-use calibrated reference source for SAR and OTA measurements. It is a stand-alone device that can be used anywhere without connection to a network. The antenna is well-matched under different loading conditions to provide a reliable output.

 
MEASUREMENT

17/01/2011

Contact
info@speag.swiss

 

iSAR² V2.3 Software Release

Fast SAR measurements are now faster than ever (less than one second).  Also, combined SAR evaluation of simultaneous transmitters and new flexibility for comparison of iSAR² measurements with DASY or other iSAR² measurements have been introduced. This further cuts the time spent on quality assurance, prototype evaluation and pre-compliance testing of wireless devices.

 
MEASUREMENT

31/12/2010

Contact
info@speag.swiss

 

DASY52 Software Release V52.6

We are pleased to announce a new release of DASY52. This release not only resolves reported bugs, but also incorporates important new features that result in reduced measurement time, more flexibility and implementation of new measurement protocols arising from the IEC/IEEE standardization committees. Furthermore, many features have been added for the DASY52NEO users.

 
MEASUREMENT

26/11/2010

Contact
info@speag.swiss

 

iSAR Discounts & Packages

Due to the popularity of our iSAR² systems and the expanding choices of accessories and calibrations, SPEAG announces new discounts and packages for iSAR². This includes discounts on systems and accessories, calibration packages and a special package with SEMCAD X ANTENNA.

 
MEASUREMENT

25/08/2010

Contact
info@speag.swiss

 

August 24-25 Installation of DASY52NEO at NIM Beijing

August 24-25 Installation of DASY52NEO at NIM Beijing

 
MEASUREMENT

24/08/2010

Contact
info@speag.swiss

 

iSAR² V2.2 Software Release

We have released iSAR² software version 2.2. New features include remote control of the iSAR² using customer-specific programs, enhanced graphical information of the iSAR² operation, and full compatibility with Windows 7 and Windows XP in 32-bit and 64-bit versions.

 
MEASUREMENT

17/07/2010

Contact
info@speag.swiss

 

New Product: DC/ELF Magnet Field Probe (DASY52NEO Compatible)

SPEAG started to integrate 3rd-Party Probes for our DASY52 NEO systems. The first probes are the 3-axis hall field probe series from MetroLab that enpower DASY52NEO to scan DC/ELF magnetic fields with high precision. 

 
MEASUREMENT

16/07/2010

Contact
info@speag.swiss

 

New Product: MEM (Membran) Phantom

The new MEM Phantom was desgined and optimized for compliance testing of wireless devices and other electromagnetic emmitting devices that may be partially surrounded by tissue or in direct contact with the skin, e.g., wireless hands-free kits, hearing aids, skin mounted devices, inductive activators, etc.  

 
MEASUREMENT

13/05/2010

Contact
info@speag.swiss

 

New Product: CRANE for iSAR²

SPEAG is introducing the CRANE for iSAR². CRANE enables testing of wireless devices on the iSAR² Flat or Head with headsets or data cables attached.

 
MEASUREMENT

06/05/2010

Contact
info@speag.swiss

 

New Product: Broad-Band Liquids for new IEC/IEEE standards

SPEAG introduces a new series of tissue simulating liquids that are broad-band based on the environmental friendlier Tween ingredient and fully compliant with the new IEC/IEEE standards allowing ±10% tolerance on the liquid parameters.

 
MEASUREMENT

06/03/2010

Contact
support@speag.swiss

 

New Product: PRE - 10

This new product PRE - 10 is a 3 channel voltage divider which extends the operation of existing SPEAG probes for use in very high fields (> 5 kV/m; > 10 kW/kg). It is compatible with all our E-Field, H-field and SAR probes.

 
MEASUREMENT

26/02/2010

Contact
support@speag.swiss

 

ISO 17025 Calibration of Dielectric Probes (OCP) now available

Our calibration laboratory has successfully established the capability for calibration of open-ended coaxial probes (OCP).

 
MEASUREMENT

05/02/2010

Contact
support@speag.swiss

 

EASY4 V4.6 New release

The new EASY4 software release V4.6 extends the usage to fields with large peak-to-average (PAR) ratios by adaption to the improved probe modulation signal calibration and also includes setting of Access Levels. The changes to the user interface are minimal and old setup and calibration files are still compatible with this version.

 
MEASUREMENT

18/01/2010

Contact
info@speag.swiss

 

iSAR² V2.1 Software Release

A new iSAR2 software release is now available. This release is the result of the popularity of our ultra-fast SAR scanners (iSAR Head and iSAR Flat) and great suggestions from our customers. Version 2.1 of the iSAR software has several new features, including a new multi-iSAR interface, a smart Combiner feature, and full extension of the software for frequencies up to 6 GHz. It also includes enhancements to our existing features, such as an improved Python interface and enhanced control of the CMU200.

 
MEASUREMENT

16/10/2009

Contact
info@speag.swiss

 

Final Release DASY52

The final release of DASY52 is a major upgrade representing the next leap in quality compliance testing of mobile phones and general near-field evaluations. The main new improvements are in the new GUI, Report Generator, Ultra-Fast SAR Procedures, and Advanced Probe Response Linearization.  Many more features that make the system compatible with the revised standards are expected to be released by the end of the year.

 
MEASUREMENT

12/10/2009

Contact
info@speag.swiss

 

Successful CTIA Audits of SPEAG Head and Hand Phantoms

SPEAG OTA phantoms with accessories were successfully tested during first CTIA V3.0 audits at ETS Lindgren, Austin on October 1st and Qualcomm, San Diego on October 9th.

 
MEASUREMENT

25/09/2009

Contact
info@speag.swiss

 

iSAR² Calibration is ISO/IEC 17025 Accredited

Schmid & Partner Engineering AG (SPEAG) is now accredited for iSAR calibration to the rigorous ISO/IEC 17025 quality standards. ISO/IEC 17025 is a laboratory quality standard that is widely recognized internationally. The addition of iSAR calibration to the SPEAG quality system provides a large portfolio of products for which SPEAG provides accredited calibration.

 
MEASUREMENT

18/02/2009

Contact
info@speag.swiss

 

iSAR² V2.0 Release

During the last 12 months we have completely redesigned the iSAR GUI and added many new functions. The iSAR software V2.0 is now released to all of our customers free of charge.

The series production of iSAR Head has begun and we already enjoy high demands. Please order now!

 
MEASUREMENT

30/01/2009

Contact
info@speag.swiss

 

HAC T-Coil Update for DASY5/4.7

DASY5 V5.0/4.7 have been updated to satisfy  our customers request to visualize HAC T-Coil measurements to 10 kHz.

 
Latest News