Swissmade
NEWS
May 17, 2022
MEASUREMENT

DASY8/6 Module HAC V1.2: Packed with New Features

Simplified procedures, additional viewer options, and more: SPEAG has further improved the user experience when testing compatibility with DASY8/6 Module HAC V1.2 between a wireless device and hearing aids according to ANSI C63.19-2019.

After the successful launch of the first version of our hearing aid compatibility module, DASY8/6 Module HAC V1.0, in November 2021, SPEAG has further improved the features and workflow of the module based on valuable customer feedback. Streamlined procedures and improved visualizations now make it easier and smoother to demonstrate compliance with ANSI C63.19-2019.

Compatibility with Windows 10/1

Module HAC V1.2 supports the latest hardware revision of the Audio Magnetic Measurement Instrument (AMMI). Based on the Roland Rubix22 USB audio interface, it is fully compatible with Windows 10/11.

Simplified Procedure

In Module HAC V1.2, the hearing aid compatibility test arch position and probe calibration results are persistent. It is no longer necessary to import them after restarting the Jupyter notebook – the last used values are automatically restored.

AngleCalibration

System response during probe angle determination

 

Automated Calculation of Codec / System Delay

The audio signal emitted by the wireless device under test may be delayed due to the codec latency. In Module HAC V1.2, this parameter no longer needs to be evaluated manually: it is now determined automatically in post-processing.

Additional Viewer Options

The field viewer comes with many new features: for example, users can now edit the color bar range and export all displayed data. In addition, the spectrally weighted undesired magnetic noise can now be visualized.

FieldViewer

H-field distribution for a Telephone Magnetic Field Simulator (TMFS) measured in transverse orientation. The color bar range is editable

 

Intuitive Communication System User Interface

The communication system selection has also been further improved: the layout is more user-friendly and the most frequently used test channels (low/middle/high) are more prominently highlighted.

CommunicationSystems

Selection of the communication system to be measured

 

Improved Post-Processing of Undesired Audio Band Magnetic Field

The post-processing algorithm for evaluating the undesired magnetic field in the audio band has been improved to avoid overestimation of when low-frequency components dominate.

 

DASY8/6 Module HAC V1.2, together with the updated manuals, can be downloaded here.

Your feedback helps us to constantly improve our products and services. If you have thoughts and suggestions, please reach out to us at support@speag.swiss.

For further information on DASY8/6 Module HAC V1.2 or any of our other products, please contact us at info@speag.swiss or via any of our sales channels.

 

CORPORATE

May 28, 2018

Contact
info@speag.swiss

 

13th Annual Hardware and Software Workshop Series in Taiwan and China Organized by AUDEN Technology Corporation

Another Successful Hardware and Software Workshop for SPEAG and ZMT Zurich MedTech AG in Taipei, Beijing, Shanghai, and Shenzhen in May 2018.

 
SIMULATION

May 25, 2018

Contact
semx-support@speag.swiss

 

SPEAG’s SEMCAD X 5G Toolkit Gets Tested for Phased-Array Antenna Design and Optimization

SEMCAD X’s 5G Toolkit put to the test: A user video demonstrates the design workflow of on-device phased-array antennas by exploiting the features of the new SEMCAD X 5G Toolkit, including the unique worst-case power density evaluator.

 
MEASUREMENT

Apr 11, 2018

Contact
info@speag.swiss

 

cDASY6 V6.6 – Ready for IoT Compliance Testing

SPEAG released cDASY6.6 which is fully compatible with IEC 62232 and the voting drafts of IEC 62209-U / IEC 62209-3 and from which DASY6 customers can benefit with immediate effect.

 
SIMULATION

Feb 20, 2018

Contact
semx-support@speag.swiss

 

SEMCAD X Matterhorn Release V17.0

SPEAG is proud to announce a major release of SEMCAD X Matterhorn V17.0! With the new release, we are particularly proud to make our innovative and easy-to-use multi-parameter, multi-goal Optimizer Framework V1 available to all of our customers.

 
MEASUREMENT

Feb 13, 2018

Contact
info@speag.swiss

 

cDASY6.6 Beta-Release

Ahead of the official release of cDASY6.6 on March 6, 2018, SPEAG has made a Beta version available for early adopters. cDASY6.6 includes many striking features, such as the full integration of specific phantoms, and the Fast Volume Scan.

 
MEASUREMENT

Feb 6, 2018

Contact
info@speag.swiss

 

cSAR3D-A: Fully Automated SAR Testing

cSAR3D-A Version 1 combines the most reliable vector-based array system cSAR3D with the precision robot of DASY6. It enables fully automated SAR evaluations with thousands of single SAR measurements - with only one click.

 
CORPORATE

Jan 19, 2018

Contact
info@speag.swiss

 

SPEAG and ZMT Sales Agents Event 2018

Sales agents representing SPEAG and ZMT Zurich MedTech AG (ZMT) products around the globe convened at Z43 17 – 19 January 2018 to learn about the whole range of products and technologies and the latest developments. Representatives from both long-time and new partners attended the 3-day event, which was a great opportunity for fruitful and in-depth discussions and face-to-face information transfer.

 
CORPORATE

Jan 19, 2018

Contact
info@speag.swiss

 

Game On! Z43’s Annual Party, 2018 “The Next Level” Edition!

The annual Zurich 43 party, this year with the gamer theme “The Next Level”, was held at Halle 622 in Zurich-Oerlikon on Friday 19 January 2018.

 
CORPORATE

Dec 27, 2017

Contact
info@speag.swiss

 

A Farewell to Fin Bomholt

All of Z43 gathered around the bar to bid a fond farewell to Dr. Fin Bomholt, SPEAG's Director Research & Development, on the occasion of his retirement.

 
CORPORATE

Dec 18, 2017

Contact
info@speag.swiss

 

Winter 2017 Info Day at Z43

On Thursday, December 14, Niels Kuster delivered his annual "State of Z43" report to all employees. The presentation was followed by an apéro, where Niels was presented with a life-size portrait of himself!

 
Page 10 of 32
 
 
Latest News