Swissmade
NEWS
May 17, 2022
MEASUREMENT

DASY8/6 Module HAC V1.2: Packed with New Features

Simplified procedures, additional viewer options, and more: SPEAG has further improved the user experience when testing compatibility with DASY8/6 Module HAC V1.2 between a wireless device and hearing aids according to ANSI C63.19-2019.

After the successful launch of the first version of our hearing aid compatibility module, DASY8/6 Module HAC V1.0, in November 2021, SPEAG has further improved the features and workflow of the module based on valuable customer feedback. Streamlined procedures and improved visualizations now make it easier and smoother to demonstrate compliance with ANSI C63.19-2019.

Compatibility with Windows 10/1

Module HAC V1.2 supports the latest hardware revision of the Audio Magnetic Measurement Instrument (AMMI). Based on the Roland Rubix22 USB audio interface, it is fully compatible with Windows 10/11.

Simplified Procedure

In Module HAC V1.2, the hearing aid compatibility test arch position and probe calibration results are persistent. It is no longer necessary to import them after restarting the Jupyter notebook – the last used values are automatically restored.

AngleCalibration

System response during probe angle determination

 

Automated Calculation of Codec / System Delay

The audio signal emitted by the wireless device under test may be delayed due to the codec latency. In Module HAC V1.2, this parameter no longer needs to be evaluated manually: it is now determined automatically in post-processing.

Additional Viewer Options

The field viewer comes with many new features: for example, users can now edit the color bar range and export all displayed data. In addition, the spectrally weighted undesired magnetic noise can now be visualized.

FieldViewer

H-field distribution for a Telephone Magnetic Field Simulator (TMFS) measured in transverse orientation. The color bar range is editable

 

Intuitive Communication System User Interface

The communication system selection has also been further improved: the layout is more user-friendly and the most frequently used test channels (low/middle/high) are more prominently highlighted.

CommunicationSystems

Selection of the communication system to be measured

 

Improved Post-Processing of Undesired Audio Band Magnetic Field

The post-processing algorithm for evaluating the undesired magnetic field in the audio band has been improved to avoid overestimation of when low-frequency components dominate.

 

DASY8/6 Module HAC V1.2, together with the updated manuals, can be downloaded here.

Your feedback helps us to constantly improve our products and services. If you have thoughts and suggestions, please reach out to us at support@speag.swiss.

For further information on DASY8/6 Module HAC V1.2 or any of our other products, please contact us at info@speag.swiss or via any of our sales channels.

 

CORPORATE

Jun 8, 2015

Contact
info@speag.swiss

 

10th Anniversary of Successful Taiwan/China Workshop Series

Auden, SPEAG and ZMT are pleased to announce the completion of the 10th edition of their successful annual hardware & software workshops in Taipei, Beijing, Shenzhen, and Shanghai.

 
MEASUREMENT

May 31, 2015

Contact
info@speag.swiss

 

Award for the Best Symposium Paper at the APEMC2015 Conference to the Developers of the ICEy and TDS Technologies

Our paper “EMC/EMI Near-field Testbed for EM Phasor Measurements Using Active Optical Sensors,” featuring the latest research in near-field EMC/EMI scanning technologies implemented in SPEAG’s TDS and ICEy systems, was awarded the Best Symposium Paper Award at the 2015 Asia-Pacific International EMC Symposium in Taipei, Taiwan.

 
MEASUREMENT

May 18, 2015

Contact
info@speag.swiss

 

DAK Software v2.0 Release

SPEAG is proud to announce the release of DAK software v2.0. Based on customer feedback and our focused expertise, the software was  completely rewritten with our own advanced software development kit (SDK) to offer a more open and flexible structure, a greater user experience, and improved functionality, while retaining the same look and feel.

 
MEASUREMENT

Apr 28, 2015

Contact
info@speag.swiss

 

SMC (Sensor Model Calibration) Release

The novel SMC Sensor Model Calibration is a breakthrough in signal independent calibration of electromagnetic linearized over a large dynamic range.This new technique increases the flexibility of the end-user and reduces calibration costs while maintaining a low measurement uncertainty.

 
MEASUREMENT

Apr 20, 2015

Contact
info@speag.swiss

 

Microphotonic Ultra-Wideband RF-over-Fiber Transducer

SPEAG is excited to announce the launch of a novel product in our TDS lineup – the fully electrically isolated RF-over-Fiber Transducer (RFoF1P). With this new product, SPEAG continues to extend the frontiers of accurate and traceable RF measurements powered by micro-photonic technologies to applications such a conducted EMC/EMI, ESD, antenna correlation and signal integrity measurements as well as to highly immune signal and power links for ultra-low-noise and ultra-wideband transmissions.

 
MEASUREMENT

Apr 20, 2015

Contact
info@speag.swiss

 

PXI TDS Remote Unit

SPEAG is proud to announce the launch of another member in our TDS lineup – the PXI (PCI eXtensions for Instrumentation) version of the TDS Remote Unit. With this new product SPEAG brings accurate and traceable RF measurements powered by micro-photonic technologies to modular instrumentation.

 
MEASUREMENT

Apr 7, 2015

Contact
info@speag.swiss

 

TDS SNI, a New Line of EMC Sniffing Probes

SPEAG is excited to announce the release of the latest addition to our TDS product family – the TDS SNI probe. With TDS SNI, SPEAG pioneers the use of photonics for accurate and traceable RF measurements in EMC/EMI sniffing applications, bringing the functionality of a benchtop spectrum analyzer to the tip of miniature electrically isolated electric and magnetic field probes.

 
MEASUREMENT

Mar 31, 2015

Contact
info@speag.swiss

 

cSAR3D and cDASY6 Features - Your Feedback is Important to Us

The response we have received on cSAR3D and cDASY6 products has been outstanding, and we would like your help in prioritizing features for the next software release. 

 
CORPORATE

Mar 19, 2015

Contact
info@speag.swiss

 

SPEAG’s Full-Body EM Phantom, “POPEYE”, Takes Center Stage in Defining the Road Ahead for Wearable Device Testing

SPEAG’s research partner, the IT'IS Foundation, and the Wireless Research Center of North Carolina have joined forces to define next generation phantom testing in the emerging market for wearable devices. SPEAG's full-body phantom "POPEYE" and other EM phantoms intended towards standards development will be deployed.

 
MEASUREMENT

Mar 18, 2015

Contact
info@speag.swiss

 

BIS Adopts the Indian Standard for Mobile Phone Handsets: Safety Requirements: IS16333 (Part 1):2015

BIS, the National Standards Body of India, has adopted Standard IS16133 (Part1):2015.

 
Page 18 of 32
 
 
Latest News