Swissmade
NEWS
10/11/2020
MEASUREMENT

Use of DASY6 for Devices Operating at 6 – 10 GHz

SPEAG’s latest Application Note provides guidance on how to best meet FCC’s
U-NII 6–7 GHz Interim Procedures.

With the opening of the Unlicensed National Information Infrastructure (U-NII) bands above 6 GHz, procedures for power density (PD) compliance testing in the reactive near-field are urgently needed.

FCC U NII6 8 

Measuring closer than λ/5 from the source is a challenge for any compliance testing method. At the last TCB workshop on October 14, 2020, the Federal Communications Commission (FCC) presented its new interim procedures for radiofrequency exposure evaluations of U-NII 6–7 GHz band portable devices. SPEAG lost no time and has already developed the corresponding measurement guidelines to empower DASY6 users to meet these FCC requirements. Our new Application Note “Interim Procedures for Devices Operating at 6 – 10 GHz” lays out in detail how to determine:

  • the absorbed PD with cDASY6 Module SAR V6.14+ and
  • the incident PD with cDASY6 Module mmWave V2.0+

The workflow will be further simplified and the assessment accuracy will be further improved with the release of Module mmWave V3.0 that is scheduled for 2Q2021.

 

MEASUREMENT

20/04/2015

Contact
info@speag.swiss

 

Microphotonic Ultra-Wideband RF-over-Fiber Transducer

SPEAG is excited to announce the launch of a novel product in our TDS lineup – the fully electrically isolated RF-over-Fiber Transducer (RFoF1P). With this new product, SPEAG continues to extend the frontiers of accurate and traceable RF measurements powered by micro-photonic technologies to applications such a conducted EMC/EMI, ESD, antenna correlation and signal integrity measurements as well as to highly immune signal and power links for ultra-low-noise and ultra-wideband transmissions.

 
MEASUREMENT

20/04/2015

Contact
info@speag.swiss

 

PXI TDS Remote Unit

SPEAG is proud to announce the launch of another member in our TDS lineup – the PXI (PCI eXtensions for Instrumentation) version of the TDS Remote Unit. With this new product SPEAG brings accurate and traceable RF measurements powered by micro-photonic technologies to modular instrumentation.

 
MEASUREMENT

07/04/2015

Contact
info@speag.swiss

 

TDS SNI, a New Line of EMC Sniffing Probes

SPEAG is excited to announce the release of the latest addition to our TDS product family – the TDS SNI probe. With TDS SNI, SPEAG pioneers the use of photonics for accurate and traceable RF measurements in EMC/EMI sniffing applications, bringing the functionality of a benchtop spectrum analyzer to the tip of miniature electrically isolated electric and magnetic field probes.

 
MEASUREMENT

31/03/2015

Contact
info@speag.swiss

 

cSAR3D and cDASY6 Features - Your Feedback is Important to Us

The response we have received on cSAR3D and cDASY6 products has been outstanding, and we would like your help in prioritizing features for the next software release. Please take our confidential survey: https://www.surveymonkey.com/s/ZX53R2N.

 
CORPORATE

19/03/2015

Contact
info@speag.swiss

 

SPEAG’s Full-Body EM Phantom, “POPEYE”, Takes Center Stage in Defining the Road Ahead for Wearable Device Testing

SPEAG’s research partner, the IT'IS Foundation, and the Wireless Research Center of North Carolina have joined forces to define next generation phantom testing in the emerging market for wearable devices. SPEAG's full-body phantom "POPEYE" and other EM phantoms intended towards standards development will be deployed.

 
MEASUREMENT

18/03/2015

Contact
info@speag.swiss

 

BIS Adopts the Indian Standard for Mobile Phone Handsets: Safety Requirements: IS16333 (Part 1):2015

BIS, the National Standards Body of India, has adopted Standard IS16133 (Part1):2015.

 
MEASUREMENT

16/03/2015

Contact
info@speag.swiss

 

cSAR3D V2.0 Release

The innovation continues with SPEAG's release of cSAR3D V2.0. This release fully integrates all cSAR3D phantom types: Flat, Left Head, Right Head and Quad. Shipments of cSAR3D Quad started in November 2014 and have far exceeded our expectations. SAR measurement of simultaneous transmisson is supported, as is base station simulator automation with both CMU200 and CMW500 from Rohde & Schwarz.

 
MEASUREMENT

23/02/2015

Contact
info@speag.swiss

 

 
MEASUREMENT

15/02/2015

Contact
info@speag.swiss

 

Progress for IEC 62209-3 Standard in San Francisco

Significant progress at recent IEC 62209-3 meeting in San Francisco resulted in agreement on broad acceptance of vector array systems such as cSAR3D, and rigorous protocols for validation and uncertainty.

 
MEASUREMENT

16/01/2015

Contact
info@speag.swiss

 

cSAR3D Quad Release

cSAR3D Quad is ideal for fast and accurate SAR testing of laptops, tablets and other large devices. In November and December 2014, several cSAR3D Quad systems were shipped and installed at customer sites, with many more scheduled to ship in early 2015. SPEAG is very pleased with the popularity and initial demand for cSAR3D Quad among our customers. 

 
Page 16 of 29