Swissmade
NEWS
May 17, 2022
MEASUREMENT

DASY8/6 Module HAC V1.2: Packed with New Features

Simplified procedures, additional viewer options, and more: SPEAG has further improved the user experience when testing compatibility with DASY8/6 Module HAC V1.2 between a wireless device and hearing aids according to ANSI C63.19-2019.

After the successful launch of the first version of our hearing aid compatibility module, DASY8/6 Module HAC V1.0, in November 2021, SPEAG has further improved the features and workflow of the module based on valuable customer feedback. Streamlined procedures and improved visualizations now make it easier and smoother to demonstrate compliance with ANSI C63.19-2019.

Compatibility with Windows 10/1

Module HAC V1.2 supports the latest hardware revision of the Audio Magnetic Measurement Instrument (AMMI). Based on the Roland Rubix22 USB audio interface, it is fully compatible with Windows 10/11.

Simplified Procedure

In Module HAC V1.2, the hearing aid compatibility test arch position and probe calibration results are persistent. It is no longer necessary to import them after restarting the Jupyter notebook – the last used values are automatically restored.

AngleCalibration

System response during probe angle determination

 

Automated Calculation of Codec / System Delay

The audio signal emitted by the wireless device under test may be delayed due to the codec latency. In Module HAC V1.2, this parameter no longer needs to be evaluated manually: it is now determined automatically in post-processing.

Additional Viewer Options

The field viewer comes with many new features: for example, users can now edit the color bar range and export all displayed data. In addition, the spectrally weighted undesired magnetic noise can now be visualized.

FieldViewer

H-field distribution for a Telephone Magnetic Field Simulator (TMFS) measured in transverse orientation. The color bar range is editable

 

Intuitive Communication System User Interface

The communication system selection has also been further improved: the layout is more user-friendly and the most frequently used test channels (low/middle/high) are more prominently highlighted.

CommunicationSystems

Selection of the communication system to be measured

 

Improved Post-Processing of Undesired Audio Band Magnetic Field

The post-processing algorithm for evaluating the undesired magnetic field in the audio band has been improved to avoid overestimation of when low-frequency components dominate.

 

DASY8/6 Module HAC V1.2, together with the updated manuals, can be downloaded here.

Your feedback helps us to constantly improve our products and services. If you have thoughts and suggestions, please reach out to us at support@speag.swiss.

For further information on DASY8/6 Module HAC V1.2 or any of our other products, please contact us at info@speag.swiss or via any of our sales channels.

 

CORPORATE

Sep 24, 2019

Contact
info@speag.swiss

 

Jubilee Hardware & Software Workshop 2019 in South Korea

DYMSTEC, SPEAG, and ZMT held their 20th annual hardware and software workshop in South Korea. The successful event featured several presentations, live demos, and product exhibitions, and was supported by a live English-Korean translation service.

 
SIMULATION

Sep 18, 2019

Contact
semx-support@speag.swiss

 

SEMCAD X Matterhorn V18.0.1 Release

SPEAG announced the release of SEMCAD X Matterhorn V18.0.1, an updated version of SEMCAD X Matterhorn  V18.0.

 
MEASUREMENT

Sep 10, 2019

Contact
info@speag.swiss

 

Entering a New World with cDASY6 Module mmWave V2.0

Two new powerful software packages in cDASY6 allow accurate power density compliance testing on the SAM phantoms for the first time.

 
MEASUREMENT

Aug 29, 2019

Contact
info@speag.swiss

 

Specific Ankle Phantom for Dosimetric Evaluations

SPEAG’s new specific Ankle Phantom provides an easy-to-use solution for SAR certification of devices operating on or near the ankle.

 
MEASUREMENT

Aug 23, 2019

Contact
info@speag.swiss

 

New Software Release DAK V2.6.0.5

We are pleased to announce the latest software release of our DAK product line, version 2.6.0.5. This important maintenance release further improves the accuracy, repeatability, speed, and user experience of measurements with our DAK/DAKS and DAK-TL systems.

 
MEASUREMENT

Jul 10, 2019

Contact
info@speag.swiss

 

cSAR3D Major Release V3-0 - More Powerful & Accurate than Ever

cSAR3D V3-0 has an upgraded user interface, enhanced 3D field reconstruction algorithm, new features and on-the-fly measurement uncertainty based on the actual measured SAR data.

 
CORPORATE

Jul 2, 2019

Contact
info@speag.swiss

 

Z43 Expands into New Quarters: Moving to the Frontline!

Z43 is expanding into beautiful new quarters at Ankerstrasse / Kräuelgasse, which include some much-needed meeting spaces. The new workplace, the former headquarters of Fabric Frontline, was inaugurated July 1 with an "Info Day" presentation in the "Salon", followed by an Apéro.

 
SIMULATION

Jun 20, 2019

Contact
semx-support@speag.swiss

 

SEMCAD X Matterhorn Major Release V18.0

With SEMCAD X Matterhorn V18.0, SPEAG is pleased to announce a new and very powerful feature: our new low-frequency electromagnetic solver suite! 

 
CORPORATE

Jun 10, 2019

Contact
info@speag.swiss

 

5G Solutions Exhibited at IEEE MTTS-IMS 2019 in Boston

SPEAG showcased a range of new high-performance smart products explicitly designed to cover 5G technologies at IEEE MTT-S 2019 International Microwave Symposium in Boston, USA.

 
MEASUREMENT

Jun 6, 2019

Contact
info@speag.swiss

 

Release of DASY52.10.2 Software Update

SPEAG announces release of the DASY52 software release with final implementation of scanning requirements as per IEC 62209-2 amendment 

 
Page 6 of 32
 
 
Latest News