Swissmade
NEWS
10/11/2020
MEASUREMENT

Use of DASY6 for Devices Operating at 6 – 10 GHz

SPEAG’s latest Application Note provides guidance on how to best meet FCC’s
U-NII 6–7 GHz Interim Procedures.

With the opening of the Unlicensed National Information Infrastructure (U-NII) bands above 6 GHz, procedures for power density (PD) compliance testing in the reactive near-field are urgently needed.

FCC U NII6 8 

Measuring closer than λ/5 from the source is a challenge for any compliance testing method. At the last TCB workshop on October 14, 2020, the Federal Communications Commission (FCC) presented its new interim procedures for radiofrequency exposure evaluations of U-NII 6–7 GHz band portable devices. SPEAG lost no time and has already developed the corresponding measurement guidelines to empower DASY6 users to meet these FCC requirements. Our new Application Note “Interim Procedures for Devices Operating at 6 – 10 GHz” lays out in detail how to determine:

  • the absorbed PD with cDASY6 Module SAR V6.14+ and
  • the incident PD with cDASY6 Module mmWave V2.0+

The workflow will be further simplified and the assessment accuracy will be further improved with the release of Module mmWave V3.0 that is scheduled for 2Q2021.

 

CORPORATE

31/12/2014

Contact
info@speag.swiss

 

Successful SPEAG exhibtions and workshops during 2013

SPEAG successfully participated on multiple international conferences and exhibitions during 2013.

 
CORPORATE

25/11/2014

Contact
info@speag.swiss

 

20 Years SPEAG & 15 Years IT'IS

The red carpet was rolled out at the Volkshaus at Helvetiaplatz on the evening of Friday, November 21st to welcome attendees of the jubilee party to celebrate the 20th anniversary of SPEAG and the 15th anniversary of the IT’IS Foundation.

 
SIMULATION

24/11/2014

Contact
semx-support@speag.swiss

 

SEMCAD X @ IEEE International Symposium on Telecommunication Technologies 2014

A tutorial course abut Antenna design for Small MIMO Terminals featuring SEMCAD X was held in Malaysia.

 
SIMULATION

18/11/2014

Contact
semx-support@speag.swiss

 

SEMCAD X Matterhorn Final Release

SPEAG is pleased to announce the final release of SEMCAD X Matterhorn V15.0. Over the past three years, a complete overhaul of the previous version of SEMCAD X was undertaken, including improvements to all of its industry leading features; the replacement of inefficient and uncompetitive components; and the creation of the most modern user interface.

 
CORPORATE

17/11/2014

Contact
info@speag.swiss

 

Spectacular Applied Research (SAR) – 2014 National Future Day

Thursday, November 13 was 2014 Future Day at Z43, and eleven curious and enthousiastic young adults spent a day visiting our team at IT’IS, SPEAG, and ZMT laboratories.

 
MEASUREMENT

15/11/2014

Contact
info@speag.swiss

 

Special Discount for iSAR to cSAR3D

We are pleased to offer an attractive discount for the upgrade of iSAR to cSAR3D. cSAR3D meets the advancing needs of customers for fast and high-precision SAR testing. 

 
MEASUREMENT

28/10/2014

Contact
info@speag.swiss

 

ICEy (Interference & Compatibility Evaluation System) Release

SPEAG is excited to announce the introduction of our novel ICEy Interference & Compatibility Evaluation system, another decisive leap forward in EMC/EMI near-field scanning technology.

 
MEASUREMENT

17/10/2014

Contact
info@speag.swiss

 

ISO/IEC 17025 Accreditation for Calibration

ISO/IEC 17025 Accreditation for Calibration of cSAR3D and TDS Awarded!

 
MEASUREMENT

16/08/2014

Contact
info@speag.swiss

 

cSAR3D Demo Video and Accreditation & Software Release Schedule

With the steady shipment of one cSAR3D FLAT unit per week successfully underway, SPEAG is now ready to ramp up cSAR3D HEAD production with the goal of also shipping three to four calibrated HEAD units per month. A demo video highlighting the exceptional functionality and user-friendliness of the system, including the new camera modules, is now available.

 
SIMULATION

01/08/2014

Contact
semx-support@speag.swiss

 

ZMT Zurich MedTech AG: Sim4Life V1.0 Released

Four years in the making, the next great alliance between engineering, medicine, technology, and design was forged with the launch of our new revolutionary simulation platform Sim4Life V1.0.

 
Page 17 of 29