Swissmade
NEWS
10/11/2020
MEASUREMENT

Use of DASY6 for Devices Operating at 6 – 10 GHz

SPEAG’s latest Application Note provides guidance on how to best meet FCC’s
U-NII 6–7 GHz Interim Procedures.

With the opening of the Unlicensed National Information Infrastructure (U-NII) bands above 6 GHz, procedures for power density (PD) compliance testing in the reactive near-field are urgently needed.

FCC U NII6 8 

Measuring closer than λ/5 from the source is a challenge for any compliance testing method. At the last TCB workshop on October 14, 2020, the Federal Communications Commission (FCC) presented its new interim procedures for radiofrequency exposure evaluations of U-NII 6–7 GHz band portable devices. SPEAG lost no time and has already developed the corresponding measurement guidelines to empower DASY6 users to meet these FCC requirements. Our new Application Note “Interim Procedures for Devices Operating at 6 – 10 GHz” lays out in detail how to determine:

  • the absorbed PD with cDASY6 Module SAR V6.14+ and
  • the incident PD with cDASY6 Module mmWave V2.0+

The workflow will be further simplified and the assessment accuracy will be further improved with the release of Module mmWave V3.0 that is scheduled for 2Q2021.

 

MEASUREMENT

23/10/2015

Contact
info@speag.swiss

 

Review of Fast SAR in Microwave RF Technology China

SPEAG products cSAR3D and DASY6 are featured in a recent issue of Chinese journal Microwave and Radiofrequency Technology. 

 
MEASUREMENT

04/10/2015

Contact
info@speag.swiss

 

cSAR3D V2.4 Release - Reduced Uncertainty

SPEAG continues to advance the state of the art for precise and fast SAR measurement with the release of cSAR3D V2.4. The implementation of new calibration techniques and reconstruction algorithms has significantly improved the measurement accuracy. Modulation analysis and standards-compatible fast SAR protocols are also new in this release.

 
MEASUREMENT

01/09/2015

Contact
info@speag.swiss

 

DAK Verification Kit

In response to numerous customer requests, SPEAG has developed the DAK Verification Kit for quick and easy verification of the Dielectric Assessment Kit system. The characterized liquid in the Verification Kit will be measured and compared to the imported target data after system calibration, ensuring reliable performance and results.

 
SIMULATION

17/07/2015

Contact
semx-support@speag.swiss

 

SEMCAD Matterhorn V15.4 Update Release

The SEMCAD X Team is pleased to announce the release of SEMCAD Matterhorn V15.4, a major update of SEMCAD Matterhorn  V15.0.

 
SIMULATION

03/07/2015

Contact
semx-support@speag.swiss

 

ZMT Zurich MedTech AG: Sim4Life V2.0 Released

Release of Sim4Life V2.0 takes the first comprehensive simulation platform to combine high-fidelity computable human phantoms with powerful physics solvers and advanced tissue models to new heights.

 
MEASUREMENT

24/06/2015

Contact
info@speag.swiss

 

Successful Presentation of Innovative SAR Measurement in UK

The future of SAR measurement technology was on full display on June 11 at an open forum organized by UL in Basingstoke, UK called “New Innovation SAR Measurement Using Array Systems”. Prominently featured at the event was a live demonstration of cSAR3D, SPEAG’s real-time SAR measurement system. The IT’IS Foundation summarized the groundbreaking research work that defined SAR measurement technology and is driving new innovations for the future.

 
CORPORATE

08/06/2015

Contact
info@speag.swiss

 

10th Anniversary of Successful Taiwan/China Workshop Series

Auden, SPEAG and ZMT are pleased to announce the completion of the 10th edition of their successful annual hardware & software workshops in Taipei, Beijing, Shenzhen, and Shanghai.

 
MEASUREMENT

31/05/2015

Contact
info@speag.swiss

 

Award for the Best Symposium Paper at the APEMC2015 Conference to the Developers of the ICEy and TDS Technologies

Our paper “EMC/EMI Near-field Testbed for EM Phasor Measurements Using Active Optical Sensors,” featuring the latest research in near-field EMC/EMI scanning technologies implemented in SPEAG’s TDS and ICEy systems, was awarded the Best Symposium Paper Award at the 2015 Asia-Pacific International EMC Symposium in Taipei, Taiwan.

 
MEASUREMENT

18/05/2015

Contact
info@speag.swiss

 

DAK Software v2.0 Release

SPEAG is proud to announce the release of DAK software v2.0. Based on customer feedback and our focused expertise, the software was  completely rewritten with our own advanced software development kit (SDK) to offer a more open and flexible structure, a greater user experience, and improved functionality, while retaining the same look and feel.

 
MEASUREMENT

28/04/2015

Contact
info@speag.swiss

 

SMC (Sensor Model Calibration) Release

The novel SMC Sensor Model Calibration is a breakthrough in signal independent calibration of electromagnetic linearized over a large dynamic range.This new technique increases the flexibility of the end-user and reduces calibration costs while maintaining a low measurement uncertainty.

 
Page 15 of 29