Swissmade
NEWS
10/11/2020
MEASUREMENT

Use of DASY6 for Devices Operating at 6 – 10 GHz

SPEAG’s latest Application Note provides guidance on how to best meet FCC’s
U-NII 6–7 GHz Interim Procedures.

With the opening of the Unlicensed National Information Infrastructure (U-NII) bands above 6 GHz, procedures for power density (PD) compliance testing in the reactive near-field are urgently needed.

FCC U NII6 8 

Measuring closer than λ/5 from the source is a challenge for any compliance testing method. At the last TCB workshop on October 14, 2020, the Federal Communications Commission (FCC) presented its new interim procedures for radiofrequency exposure evaluations of U-NII 6–7 GHz band portable devices. SPEAG lost no time and has already developed the corresponding measurement guidelines to empower DASY6 users to meet these FCC requirements. Our new Application Note “Interim Procedures for Devices Operating at 6 – 10 GHz” lays out in detail how to determine:

  • the absorbed PD with cDASY6 Module SAR V6.14+ and
  • the incident PD with cDASY6 Module mmWave V2.0+

The workflow will be further simplified and the assessment accuracy will be further improved with the release of Module mmWave V3.0 that is scheduled for 2Q2021.

 

MEASUREMENT

23/02/2016

Contact
info@speag.swiss

 

Still Groovin’ to the E-Field Probe Blues by Prof. Howard Bassen

The first paper to describe the design and fabrication of a miniature broad-band electric field probe was published more than 40 years ago in the Annals of the New York Academy of Sciences, Biological Effects of Nonionizing Radiation.

 
MEASUREMENT

10/02/2016

Contact
info@speag.swiss

 

Anritsu MT8820C Integrates with DASY6 and cSAR3D

Anritsu Corporation’s MT8820C Radio Communication Analyzer now integrates with both DASY6 and cSAR3D from Schmid & Partner Engineering AG (SPEAG) to provide seamless Specific Absorption Rate (SAR) compliance testing that significantly reduces assessment costs and maximizes flexibility.

 
MEASUREMENT

06/02/2016

Contact
info@speag.swiss

 

Notice: Limited warranty on phantoms

Important notice to avoid shell degradation of SPEAG phantoms due to exposure to aggressive liquids.

 
CORPORATE

04/02/2016

Contact
info@speag.swiss

 

IT'IS/Speag/ZMT Retreat in Melchsee-Frutt on Mastering Sales/Funding, Spotting Trends and Shaping the Future

Twenty IT'IS Foundation, SPEAG, and ZMT co-workers convened for two-day retreat, 01 – 02 February 2016, held at the Hotel Frutt Lodge & SPA, in Melchsee-Frutt, Canton Obwalden. The goal of the retreat was to learn how to spot trends and become a trend setter, to master sales, to assess the current status of the organization, and to establish measures for improvement.

 
CORPORATE

22/01/2016

Contact
info@speag.swiss

 

Let’s Party! Festivities to Kick Start 2016!

This year’s party of Z43 (IT'IS Foundation, SPEAG, ZMT) was held at trendy Art Dock, located in the former freight terminal between Zurich’s Hardbrücke and Central train stations.

 
SIMULATION

08/12/2015

Contact
semx-support@speag.swiss

 

SEMCAD Matterhorn V15.6 Released

The SEMCAD X Team is pleased to announce the release of SEMCAD Matterhorn V15.6, an update of SEMCAD Matterhorn  V15.4.

 
CORPORATE

12/11/2015

Contact
info@speag.swiss

 

National Future Day 2015 – Wireless Power Transfer with the Kids “Wonderful and Powerful Team”

Thursday, November 12 was 2015 Future Day at Z43, and six engaged and curious youngsters spent the day visiting our team at IT’IS, SPEAG, and ZMT laboratories.

 
MEASUREMENT

04/11/2015

Contact
info@speag.swiss

 

SPEAG Strongly Recommends Regular Recertification of OTA Hand Phantoms

On the basis of careful investigation of used hand phantoms that have been returned to our labs, SPEAG strongly recommends recertification of all SHO hand phantoms after at most 3 years of use or in the case of any visible damage.

 
MEASUREMENT

26/10/2015

Contact
info@speag.swiss

 

DAKS-12, SPEAG’s New Portable DAK System for Lower Frequencies

SPEAG is pleased to announce the release of our latest portable dielectric measurement system, the DAKS-12, which combines SPEAG’s DAK-12 probe with a handheld single-port ShockLine MS46121A vector network analyzer from Anritsu. The easy-to-use DAKS-12 is designed for very robust dielectric measurements in the frequency range of 10 MHz – 3 GHz.

 
CORPORATE

23/10/2015

Contact
info@speag.swiss

 

Successful SPEAG / ZMT Hardware and Software Workshop in Korea

ZMT Zurich MedTech AG and SPEAG hosted the annual Hardware and Software Workshop in Korea on October 23, 2015, with Dymstec, SPEAG’s distribution partner in Korea, as the local organizers of this popular event. Approximately 200 participants attended the workshop to preview ZMT’s and SPEAG’s latest innovations and product updates and to learn about the roadmap for future technological advances in 2015 and beyond. 

 
Page 14 of 29