Swissmade
NEWS
10/11/2020
MEASUREMENT

Use of DASY6 for Devices Operating at 6 – 10 GHz

SPEAG’s latest Application Note provides guidance on how to best meet FCC’s
U-NII 6–7 GHz Interim Procedures.

With the opening of the Unlicensed National Information Infrastructure (U-NII) bands above 6 GHz, procedures for power density (PD) compliance testing in the reactive near-field are urgently needed.

FCC U NII6 8 

Measuring closer than λ/5 from the source is a challenge for any compliance testing method. At the last TCB workshop on October 14, 2020, the Federal Communications Commission (FCC) presented its new interim procedures for radiofrequency exposure evaluations of U-NII 6–7 GHz band portable devices. SPEAG lost no time and has already developed the corresponding measurement guidelines to empower DASY6 users to meet these FCC requirements. Our new Application Note “Interim Procedures for Devices Operating at 6 – 10 GHz” lays out in detail how to determine:

  • the absorbed PD with cDASY6 Module SAR V6.14+ and
  • the incident PD with cDASY6 Module mmWave V2.0+

The workflow will be further simplified and the assessment accuracy will be further improved with the release of Module mmWave V3.0 that is scheduled for 2Q2021.

 

CORPORATE

26/09/2016

Contact
info@speag.swiss

 

EUMW, October 4 – 6, 2016: We look forward to welcoming you to our booth (Hall S11, Booth 134)!

SPEAG will exhibit at EuMW conference (Hall S11, Booth 134) in London, UK to display and demonstrate new products and solutions optimized for the demanding applications in the wireless, automotive, aerospace, and defence industries. 

 
CORPORATE

30/08/2016

Contact
info@speag.swiss

 

SPEAG Provides State-of-the-Art Phantoms for the World's Fastest GPS Air Performance Test for Wearable Devices

Verkotan has developed a real over-the-air GPS field test environment into the test laboratory. The test (patent pending) has been developed in close collaboration with the Centre for Wireless Communication (CWC) at University of Oulu, the VTT Technical Research Centre of Finland Ltd, and SPEAG. It allows the testing of a device’s total GPS air performance (chipset, mechanics, and antenna) in one test run.

 
MEASUREMENT

05/08/2016

Contact
info@speag.swiss

 

cSARD6 – Taking SAR Measurements to the Next Level

SPEAG is pleased to announce the release of cSARD6 in Q4 2016, the smart SAR testing solution. cSARD6 integrates cSAR3D with DASY6 and adds new features to create a fully automated and powerful SAR compliance system. This is the most advanced SAR measurement system available today, combining speed and versatility, while maintaining full SAR testing capabilities and compatibility to any of the worldwide standards.

 
SIMULATION

18/07/2016

Contact
semx-support@speag.swiss

 

SEMCAD X Matterhorn V16.0 Released

The SEMCAD X Team is pleased to announce the release of SEMCAD X Matterhorn V16.0, an update of SEMCAD X Matterhorn  V15.6.

 
MEASUREMENT

13/07/2016

Contact
info@speag.swiss

 

cSAR3D V2.6 Release - Faster Automation

Our new cSAR3D software release 2.6 features a further improved reconstruction algorithm, more precise determination of the peak spatial SAR close to the border of the sensor array, and faster and more reliable handovers of 2G, 3G and 4G signals. We are also pleased to announce that this quarter we are releasing both automated testing of devices with dynamic antenna tuners and autonomous DUT positioning based on DASY robots with integrated camera and device charger. 

 
MEASUREMENT

01/07/2016

Contact
info@speag.swiss

 

ISO/IEC 17025 Accreditation for Calibration

ISO/IEC 17025 Accreditation for Calibration of probes & validation sources extended down ot 4 MHz and Calibration of dielectric materials awarded

 
MEASUREMENT

31/03/2016

Contact
info@speag.swiss

 

DASY Measurement Protocol for Capacitively Coupled SAR Distribution

SPEAG recommends an updated measurement protocols for compliance testing with DASY52 to account for new technology trends and regulator requirements. cDASY6 will have a more advanced automated approach.

 
MEASUREMENT

21/03/2016

Contact
info@speag.swiss

 

Chinese OTA Hand Phantoms

Release of the first Chinese OTA hand phantom developed in collaboration with HWA-Tech for the Chinese Academy of Broadcasting Planning (ABP).

 
CORPORATE

11/03/2016

Contact
info@speag.swiss

 

SPEAG Fast SAR Solutions Featured at MIC MRA Workshop in Tokyo

The performance of SPEAG’s products for fast measurement of specific absorption rate (SAR) – DASY6 and cSAR3D – were featured in a presentation by Prof. Niels Kuster at the MIC MRA International Workshop held March 2 – 3, 2016 in Tokyo hosted by the Japanese Ministry of Internal Affairs and Communications.

 
SIMULATION

08/03/2016

Contact
semx-support@speag.swiss

 

SEMCAD Matterhorn V15.6.3 Update Release

The SEMCAD X Team is pleased to announce the release of SEMCAD Matterhorn V15.6.3, an updated version of SEMCAD Matterhorn  V15.6.

 
Page 13 of 29