DASY8/6 Module WPT V2.0: Enhanced and Fast WPT Compliance Testing
SPEAG released DASY8/6 Module WPT V2.0, which integrates the new MAGPy Version 2 with the DASY8/6 system and provides 8-times faster, more accurate, and total field (magnetic and electric field) compliance testing of sources emitting any periodic signals (<10 MHz) against the basic restrictions.
The latest version of our DASY8/6 Module WPT, V2.0, is now based on MAGPy Version 2 and takes full advantage of this stand-alone product. Evaluating wireless power transfer (WPT) systems has never been so quick and easy with maximum precision:
8× faster measurements, as the new probes allow assessment of the eight isotropic magnetic (H-)field probes (23 sensors plus phase) at each robot position;
Simultaneous measurement of the incident electric (E-)field with its integrated isotropic E-field sensor;
Evaluation of periodic signals with non-sinusoidal waveforms and duty cycles;
Evaluation of all basic restriction quantities, now also including the local non-averaged induced E-field required by ISED;
Conversion of the measured H-field distribution into a Maxwell field and calculation of the fields in the standardized phantom without loss of precision (Tier 4 of IEC 63184);
This user video shows how the MAGPy Version 2 probe, integrated with DASY8/6 Module WPT V2.0, is used to determine compliance for wireless power transfer devices.
Another important advantage is the dual use of the MAGPy system as a hand-held system (MAGPy Version 2) and as part of Module WPT (DASY8/6 Module WPT V2.0), as customers only need to buy and calibrate one device.
If you have any suggestions or would like to receive further information, please contact us at email@example.com.
China Telecommunication Technology Labs-Terminals (CTTL-Terminals), China’s premier wireless testing authority, is now routinely applying SPEAG’s vector measurement-based array system cSAR3D for pre-compliance evaluations of wireless devices for several of China’s manufacturers.
Twenty-five Zurich43 associates and three IT'IS Foundation board members gathered in the historic Hotel Pilatus-Kulm high above Luzern 30 – 31 January 2016 for their annual retreat, this year on communication. The goal of the two-day retreat was to find ways to improve communication skills across various target groups, channels, and markets, both within Z43 and with the outside world.
SPEAG invests in the future of dry SAR testing systems: New standards drive dedicated Cal Lab
In order to comply with the requirements of the upcoming IEC 62209/ Part 3 SAR testing standards, SPEAG has set up a dedicated laboratory for calibrating ‘dry’ SAR testing systems at their manufacturing facility located in the heart of Zurich. The laboratory complements their already existing and well-established ‘wet’ SAR system service centre.