Swissmade
NEWS
25/06/2020
CORPORATE

Z43 Goes Carbon Dioxide-Free

As part of our effort to help create a sustainable and healthier future, energy at Z43 is now 100% renewable, which will lead to a reduction in CO2 emissions of more than 60,000 m3 per year – corresponding to about twenty times the CO2 footprint of the average Swiss.

For the past 20 years, we have produced the heating energy for the Z43 headquarters in Zurich – home to the IT’IS Foundation, Schmid & Partner Engineering AG, and ZMT Zurich MedTech AG – as well as supplied adjacent residential buildings with more than 79 apartments with natural gas. Our labs, on the other hand, were cooled via a small heat pump powered by electricity. Though gas is “cleaner” than oil or coal, we strongly felt that it was time to switch from fossil fuels to renewable sources of power in order to run our work lives more sustainably.

niels roof panels web

niels basement heating web

So we finally got rid of the gas burners in our basement and invested heavily in a new energy system. The newly installed 500 kW heat pump now heats and cools the various buildings by exchanging heat with the groundwater stream that runs 30 m below our premises. In addition, because our labs and servers produce more heating energy than we can use during the summer, we replaced the warm-water panels on the roof with photovoltaic cells to generate our electric power. We also took care to only subscribe to companies that exclusively generate electricity by hydro, wind, and solar power. This complements our internal policy that Z43 staff should only commute by car to work in exceptional circumstances (e.g., it was appropriate to do so during the COVID-19 pandemic).

We are proud that we have started to generate our own energy and have become largely CO2-free at Z43.

Curious how it looks? Check out our CO2-free energy production by clicking on the leaf:

leaf slogan mm3

The leaf can also be found in the header of any of our webpages: IT’IS Foundation, SPEAG, ZMT, and Zurich43.

Z43 – Think Renewable!

MEASUREMENT

07/08/2012

Contact
info@speag.swiss

 

DASY52.8.2 and SEMCAD X V14.6.6 Software Release

SPEAG is pleased to announce the release of DASY52.8.2 (969) and SEMCAD-X V14.6.6 (6824). It took us slightly longer than promised for this release, however we not only removed the reported bugs but also added new features which will ease the daily usage of our DASY system as well as provide even better compatibility with current and upcoming compliance standards. In particular, we support our new MIF box, support the creation of SAR compliance reports and we improved the interface to the CMW500. In addition, the DAK team added two new videos to our webpage.

 
MEASUREMENT

02/08/2012

Contact
info@speag.swiss

 

New Phantom Products

In response to customer requests for more versatile phantoms, SPEAG introduces several new whole-body and hand phantoms.

 
CORPORATE

24/07/2012

Contact
info@speag.swiss

 

SPEAG sponsors "IT'IS for Health" with CHF 200 000

SPEAG Executive Board congratulates Niels Kuster, SPEAG Co-Founder and President of the Board of Directors, on receiving the distinguished d'Arsonval Award, the highest scientific honor of the Bioelectromagnetics Society.

 
MEASUREMENT

18/07/2012

Contact
info@speag.swiss

 

DAK Software Release

We are pleased to announce the latest DAK Software which is more flexible and versatile than the previous version.

 
SIMULATION

12/07/2012

Contact
semx-support@speag.swiss

 

SEMCAD X v14.8.1 Update Release

The SEMCAD X Team is pleased to announce the release of SEMCAD X v14.8.1, an update of SEMCAD X Aletsch v14.8.

 
MEASUREMENT

11/07/2012

Contact
info@speag.swiss

 

France Enforces SAR Requirements in Limbs

Recent information has been issued by the French government that wireless devices must comply with SAR limits in the limbs and hands. DASY52 is fully compatible with all testing requirements and international measurement standards. SAR phantoms and tissue equivalent liquids are available from SPEAG.

 
SIMULATION

26/06/2012

Contact
semx-support@speag.swiss

 

SEMCAD X Student Research Award 2011 Winners

Schmid & Partner Engineering AG (SPEAG) is very pleased to announce the winners of SEMCAD X Student Research Award 2011.

 
MEASUREMENT

25/05/2012

Contact
info@speag.swiss

 

Next Generation 3D Compliance SAR Systems - cSAR3D

SPEAG is pleased to introduce the next generation in fast, high-precision Compliance SAR (cSAR3D) Systems, a system concept that had been developed during the last months to meet the various requests/suggestions of our highly valued customers.

 
MEASUREMENT

23/04/2012

Contact
info@speag.swiss

 

DAK Frequency Extension

We are pleased to announce that the frequency range of DAK has been extended.  A novel algorithm has been implemented that extends the dielectric measurement capability of the DAK-12 Probe to 10 MHz - 5 GHz.

 
SIMULATION

27/02/2012

Contact
semx-support@speag.swiss

 

SEMCAD X V14.8.0 Aletsch

The SEMCAD X Team is pleased to announce the release of SEMCAD X V14.8.0 Aletsch, a major upgrade offering a range of powerful new Modules and features, more robust handling as well as new customization options.

 
Page 22 of 28