Swissmade
NEWS
25/06/2020
CORPORATE

Z43 Goes Carbon Dioxide-Free

As part of our effort to help create a sustainable and healthier future, energy at Z43 is now 100% renewable, which will lead to a reduction in CO2 emissions of more than 60,000 m3 per year – corresponding to about twenty times the CO2 footprint of the average Swiss.

For the past 20 years, we have produced the heating energy for the Z43 headquarters in Zurich – home to the IT’IS Foundation, Schmid & Partner Engineering AG, and ZMT Zurich MedTech AG – as well as supplied adjacent residential buildings with more than 79 apartments with natural gas. Our labs, on the other hand, were cooled via a small heat pump powered by electricity. Though gas is “cleaner” than oil or coal, we strongly felt that it was time to switch from fossil fuels to renewable sources of power in order to run our work lives more sustainably.

niels roof panels web

niels basement heating web

So we finally got rid of the gas burners in our basement and invested heavily in a new energy system. The newly installed 500 kW heat pump now heats and cools the various buildings by exchanging heat with the groundwater stream that runs 30 m below our premises. In addition, because our labs and servers produce more heating energy than we can use during the summer, we replaced the warm-water panels on the roof with photovoltaic cells to generate our electric power. We also took care to only subscribe to companies that exclusively generate electricity by hydro, wind, and solar power. This complements our internal policy that Z43 staff should only commute by car to work in exceptional circumstances (e.g., it was appropriate to do so during the COVID-19 pandemic).

We are proud that we have started to generate our own energy and have become largely CO2-free at Z43.

Curious how it looks? Check out our CO2-free energy production by clicking on the leaf:

leaf slogan mm3

The leaf can also be found in the header of any of our webpages: IT’IS Foundation, SPEAG, ZMT, and Zurich43.

Z43 – Think Renewable!

MEASUREMENT

07/12/2016

Contact
info@speag.swiss

 

New DAK-TL Demonstration

Watch our recent product video demonstrating the latest advancement of our Dielectric Assessment Kit product line. DAK-TL brings automated precise measurements of dielectric permittivity, conductivity and homogeneity of boards, sheets, foils and small samples of tissues or liquids to your bench – giving you results in seconds.

 
MEASUREMENT

17/11/2016

Contact
info@speag.swiss

 

DASY6 and cSAR3D Regulatory Acceptance: SAR Standards Move Forward

SPEAG is very happy to provide you with an update of the IEC 106 Standard Meetings in Hangzhou, China, together with exciting new data regarding the performance and regulatory acceptance of DASY6 and cSAR3D.

 
MEASUREMENT

02/11/2016

Contact
info@speag.swiss

 

User Video Shows Unrivaled Repeatability of cSAR3D Fast SAR Test System

User Video Shows Unrivaled Repeatability of cSAR3D Fast SAR Test System

 
CORPORATE

26/09/2016

Contact
info@speag.swiss

 

EUMW, October 4 – 6, 2016: We look forward to welcoming you to our booth (Hall S11, Booth 134)!

SPEAG will exhibit at EuMW conference (Hall S11, Booth 134) in London, UK to display and demonstrate new products and solutions optimized for the demanding applications in the wireless, automotive, aerospace, and defence industries. 

 
CORPORATE

30/08/2016

Contact
info@speag.swiss

 

SPEAG Provides State-of-the-Art Phantoms for the World's Fastest GPS Air Performance Test for Wearable Devices

Verkotan has developed a real over-the-air GPS field test environment into the test laboratory. The test (patent pending) has been developed in close collaboration with the Centre for Wireless Communication (CWC) at University of Oulu, the VTT Technical Research Centre of Finland Ltd, and SPEAG. It allows the testing of a device’s total GPS air performance (chipset, mechanics, and antenna) in one test run.

 
MEASUREMENT

05/08/2016

Contact
info@speag.swiss

 

cSARD6 – Taking SAR Measurements to the Next Level

SPEAG is pleased to announce the release of cSARD6 in Q4 2016, the smart SAR testing solution. cSARD6 integrates cSAR3D with DASY6 and adds new features to create a fully automated and powerful SAR compliance system. This is the most advanced SAR measurement system available today, combining speed and versatility, while maintaining full SAR testing capabilities and compatibility to any of the worldwide standards.

 
SIMULATION

18/07/2016

Contact
semx-support@speag.swiss

 

SEMCAD X Matterhorn V16.0 Released

The SEMCAD X Team is pleased to announce the release of SEMCAD X Matterhorn V16.0, an update of SEMCAD X Matterhorn  V15.6.

 
MEASUREMENT

13/07/2016

Contact
info@speag.swiss

 

cSAR3D V2.6 Release - Faster Automation

Our new cSAR3D software release 2.6 features a further improved reconstruction algorithm, more precise determination of the peak spatial SAR close to the border of the sensor array, and faster and more reliable handovers of 2G, 3G and 4G signals. We are also pleased to announce that this quarter we are releasing both automated testing of devices with dynamic antenna tuners and autonomous DUT positioning based on DASY robots with integrated camera and device charger. 

 
MEASUREMENT

01/07/2016

Contact
info@speag.swiss

 

ISO/IEC 17025 Accreditation for Calibration

ISO/IEC 17025 Accreditation for Calibration of probes & validation sources extended down ot 4 MHz and Calibration of dielectric materials awarded

 
MEASUREMENT

31/03/2016

Contact
info@speag.swiss

 

DASY Measurement Protocol for Capacitively Coupled SAR Distribution

SPEAG recommends an updated measurement protocols for compliance testing with DASY52 to account for new technology trends and regulator requirements. cDASY6 will have a more advanced automated approach.

 
Page 12 of 28