DASY8/6 Module WPT V2.0: Enhanced and Fast WPT Compliance Testing
SPEAG released DASY8/6 Module WPT V2.0, which integrates the new MAGPy Version 2 with the DASY8/6 system and provides 8-times faster, more accurate, and total field (magnetic and electric field) compliance testing of sources emitting any periodic signals (<10 MHz) against the basic restrictions.
The latest version of our DASY8/6 Module WPT, V2.0, is now based on MAGPy Version 2 and takes full advantage of this stand-alone product. Evaluating wireless power transfer (WPT) systems has never been so quick and easy with maximum precision:
8× faster measurements, as the new probes allow assessment of the eight isotropic magnetic (H-)field probes (23 sensors plus phase) at each robot position;
Simultaneous measurement of the incident electric (E-)field with its integrated isotropic E-field sensor;
Evaluation of periodic signals with non-sinusoidal waveforms and duty cycles;
Evaluation of all basic restriction quantities, now also including the local non-averaged induced E-field required by ISED;
Conversion of the measured H-field distribution into a Maxwell field and calculation of the fields in the standardized phantom without loss of precision (Tier 4 of IEC 63184);
This user video shows how the MAGPy Version 2 probe, integrated with DASY8/6 Module WPT V2.0, is used to determine compliance for wireless power transfer devices.
Another important advantage is the dual use of the MAGPy system as a hand-held system (MAGPy Version 2) and as part of Module WPT (DASY8/6 Module WPT V2.0), as customers only need to buy and calibrate one device.
If you have any suggestions or would like to receive further information, please contact us at email@example.com.
Schmid & Partner Engineering AG (SPEAG) sponsored the awards at the 2nd International Workshop on Photonics Applied to Electromagnetic Measurements (PEM2017), hosted by the IT'IS Foundation and held at the Volkshaus in Zurich, Switzerland on October 5 – 6, 2017. The PEM workshops are devoted to the research, development, and application of photonics in electromagnetic measurements and closely related fields, such as fiber-optic signal transmission, photonic signal processing, display integrated antennas, and photonic device technology.
Schmid & Partner Engineering AG (SPEAG) and ZMT Zurich MedTech AG (ZMT) are pleased to announce their annual hardware and software workshop, to be held in Seoul, South Korea, on 27 October 2017. Our in-house experts, together with our partners from Dymstec, will demonstrate SPEAG's and ZMT's latest innovations and product updates and provide information about standards trends and our roadmap for addressing emerging industry needs.
A DPAS (Draft Publicly Available Specification) of Part 3 of the IEC standard 62209, which will allow the use of standardized fixed sensor array systems in addition to robot-based scanning systems, has been submitted for IEC approval.
SPEAG, ZMT Zurich MedTech AG and their distribution partner in China and Taiwan, AUDEN Technology Corporation, hosted the popular Annual Hardware & Software Workshop Series in Beijing, Shanghai and Shenzhen (China), as well as Taipei (Taiwan) in June 2017. Overall, more than 200 participants from industry and academia explored SPEAG's and ZMT’s latest innovations and product updates, and discovered how SPEAG’s and ZMT’s solutions and technology roadmap adds value to their current R&D operations while anticipating future technological advances in 2017 and beyond.
SPEAG is happy to announce the release of cDASY6 V6.4. With V6.4, the greatly reduced measurement time and the testing automatization of our DASY6 system is now accepted by all regulators. The release also entails all necessary features to meet the upcoming unified IEC 62209-U standard and is capable of testing all IoT devices.