Swissmade
NEWS
May 17, 2022
MEASUREMENT

DASY8/6 Module HAC V1.2: Packed with New Features

Simplified procedures, additional viewer options, and more: SPEAG has further improved the user experience when testing compatibility with DASY8/6 Module HAC V1.2 between a wireless device and hearing aids according to ANSI C63.19-2019.

After the successful launch of the first version of our hearing aid compatibility module, DASY8/6 Module HAC V1.0, in November 2021, SPEAG has further improved the features and workflow of the module based on valuable customer feedback. Streamlined procedures and improved visualizations now make it easier and smoother to demonstrate compliance with ANSI C63.19-2019.

Compatibility with Windows 10/1

Module HAC V1.2 supports the latest hardware revision of the Audio Magnetic Measurement Instrument (AMMI). Based on the Roland Rubix22 USB audio interface, it is fully compatible with Windows 10/11.

Simplified Procedure

In Module HAC V1.2, the hearing aid compatibility test arch position and probe calibration results are persistent. It is no longer necessary to import them after restarting the Jupyter notebook – the last used values are automatically restored.

AngleCalibration

System response during probe angle determination

 

Automated Calculation of Codec / System Delay

The audio signal emitted by the wireless device under test may be delayed due to the codec latency. In Module HAC V1.2, this parameter no longer needs to be evaluated manually: it is now determined automatically in post-processing.

Additional Viewer Options

The field viewer comes with many new features: for example, users can now edit the color bar range and export all displayed data. In addition, the spectrally weighted undesired magnetic noise can now be visualized.

FieldViewer

H-field distribution for a Telephone Magnetic Field Simulator (TMFS) measured in transverse orientation. The color bar range is editable

 

Intuitive Communication System User Interface

The communication system selection has also been further improved: the layout is more user-friendly and the most frequently used test channels (low/middle/high) are more prominently highlighted.

CommunicationSystems

Selection of the communication system to be measured

 

Improved Post-Processing of Undesired Audio Band Magnetic Field

The post-processing algorithm for evaluating the undesired magnetic field in the audio band has been improved to avoid overestimation of when low-frequency components dominate.

 

DASY8/6 Module HAC V1.2, together with the updated manuals, can be downloaded here.

Your feedback helps us to constantly improve our products and services. If you have thoughts and suggestions, please reach out to us at support@speag.swiss.

For further information on DASY8/6 Module HAC V1.2 or any of our other products, please contact us at info@speag.swiss or via any of our sales channels.

 

CORPORATE

Nov 12, 2015

Contact
info@speag.swiss

 

National Future Day 2015 – Wireless Power Transfer with the Kids “Wonderful and Powerful Team”

Thursday, November 12 was 2015 Future Day at Z43, and six engaged and curious youngsters spent the day visiting our team at IT’IS, SPEAG, and ZMT laboratories.

 
MEASUREMENT

Nov 4, 2015

Contact
info@speag.swiss

 

SPEAG Strongly Recommends Regular Recertification of OTA Hand Phantoms

On the basis of careful investigation of used hand phantoms that have been returned to our labs, SPEAG strongly recommends recertification of all SHO hand phantoms after at most 3 years of use or in the case of any visible damage.

 
MEASUREMENT

Oct 26, 2015

Contact
info@speag.swiss

 

DAKS-12, SPEAG’s New Portable DAK System for Lower Frequencies

SPEAG is pleased to announce the release of our latest portable dielectric measurement system, the DAKS-12, which combines SPEAG’s DAK-12 probe with a handheld single-port ShockLine MS46121A vector network analyzer from Anritsu. The easy-to-use DAKS-12 is designed for very robust dielectric measurements in the frequency range of 10 MHz – 3 GHz.

 
MEASUREMENT

Oct 23, 2015

Contact
info@speag.swiss

 

Review of Fast SAR in Microwave RF Technology China

SPEAG products cSAR3D and DASY6 are featured in a recent issue of Chinese journal Microwave and Radiofrequency Technology. 

 
CORPORATE

Oct 23, 2015

Contact
info@speag.swiss

 

Successful SPEAG / ZMT Hardware and Software Workshop in Korea

ZMT Zurich MedTech AG and SPEAG hosted the annual Hardware and Software Workshop in Korea on October 23, 2015, with Dymstec, SPEAG’s distribution partner in Korea, as the local organizers of this popular event. Approximately 200 participants attended the workshop to preview ZMT’s and SPEAG’s latest innovations and product updates and to learn about the roadmap for future technological advances in 2015 and beyond. 

 
MEASUREMENT

Oct 4, 2015

Contact
info@speag.swiss

 

cSAR3D V2-4 Release - Reduced Uncertainty

SPEAG continues to advance the state of the art for precise and fast SAR measurement with the release of cSAR3D V2-4. The implementation of new calibration techniques and reconstruction algorithms has significantly improved the measurement accuracy. Modulation analysis and standards-compatible fast SAR protocols are also new in this release.

 
MEASUREMENT

Sep 1, 2015

Contact
info@speag.swiss

 

DAK Verification Kit

In response to numerous customer requests, SPEAG has developed the DAK Verification Kit for quick and easy verification of the Dielectric Assessment Kit system. The characterized liquid in the Verification Kit will be measured and compared to the imported target data after system calibration, ensuring reliable performance and results.

 
SIMULATION

Jul 17, 2015

Contact
semx-support@speag.swiss

 

SEMCAD Matterhorn V15.4 Update Release

The SEMCAD X Team is pleased to announce the release of SEMCAD Matterhorn V15.4, a major update of SEMCAD Matterhorn  V15.0.

 
SIMULATION

Jul 3, 2015

Contact
semx-support@speag.swiss

 

ZMT Zurich MedTech AG: Sim4Life V2.0 Released

Release of Sim4Life V2.0 takes the first comprehensive simulation platform to combine high-fidelity computable human phantoms with powerful physics solvers and advanced tissue models to new heights.

 
MEASUREMENT

Jun 24, 2015

Contact
info@speag.swiss

 

Successful Presentation of Innovative SAR Measurement in UK

The future of SAR measurement technology was on full display on June 11 at an open forum organized by UL in Basingstoke, UK called “New Innovation SAR Measurement Using Array Systems”. Prominently featured at the event was a live demonstration of cSAR3D, SPEAG’s real-time SAR measurement system. The IT’IS Foundation summarized the groundbreaking research work that defined SAR measurement technology and is driving new innovations for the future.

 
Page 17 of 32
 
 
Latest News