Swissmade
NEWS
May 17, 2022
MEASUREMENT

DASY8/6 Module HAC V1.2: Packed with New Features

Simplified procedures, additional viewer options, and more: SPEAG has further improved the user experience when testing compatibility with DASY8/6 Module HAC V1.2 between a wireless device and hearing aids according to ANSI C63.19-2019.

After the successful launch of the first version of our hearing aid compatibility module, DASY8/6 Module HAC V1.0, in November 2021, SPEAG has further improved the features and workflow of the module based on valuable customer feedback. Streamlined procedures and improved visualizations now make it easier and smoother to demonstrate compliance with ANSI C63.19-2019.

Compatibility with Windows 10/1

Module HAC V1.2 supports the latest hardware revision of the Audio Magnetic Measurement Instrument (AMMI). Based on the Roland Rubix22 USB audio interface, it is fully compatible with Windows 10/11.

Simplified Procedure

In Module HAC V1.2, the hearing aid compatibility test arch position and probe calibration results are persistent. It is no longer necessary to import them after restarting the Jupyter notebook – the last used values are automatically restored.

AngleCalibration

System response during probe angle determination

 

Automated Calculation of Codec / System Delay

The audio signal emitted by the wireless device under test may be delayed due to the codec latency. In Module HAC V1.2, this parameter no longer needs to be evaluated manually: it is now determined automatically in post-processing.

Additional Viewer Options

The field viewer comes with many new features: for example, users can now edit the color bar range and export all displayed data. In addition, the spectrally weighted undesired magnetic noise can now be visualized.

FieldViewer

H-field distribution for a Telephone Magnetic Field Simulator (TMFS) measured in transverse orientation. The color bar range is editable

 

Intuitive Communication System User Interface

The communication system selection has also been further improved: the layout is more user-friendly and the most frequently used test channels (low/middle/high) are more prominently highlighted.

CommunicationSystems

Selection of the communication system to be measured

 

Improved Post-Processing of Undesired Audio Band Magnetic Field

The post-processing algorithm for evaluating the undesired magnetic field in the audio band has been improved to avoid overestimation of when low-frequency components dominate.

 

DASY8/6 Module HAC V1.2, together with the updated manuals, can be downloaded here.

Your feedback helps us to constantly improve our products and services. If you have thoughts and suggestions, please reach out to us at support@speag.swiss.

For further information on DASY8/6 Module HAC V1.2 or any of our other products, please contact us at info@speag.swiss or via any of our sales channels.

 

MEASUREMENT

Feb 28, 2017

Contact
info@speag.swiss

 

cSAR3D Measurements in Great Demand

China Telecommunication Technology Labs-Terminals (CTTL-Terminals), China’s premier wireless testing authority, is now routinely applying SPEAG’s vector measurement-based array system cSAR3D for pre-compliance evaluations of wireless devices for several of China’s manufacturers.

 
MEASUREMENT

Feb 25, 2017

Contact
info@speag.swiss

 

Brief Update: IEC 62209 Standard Meeting Exceeds Expectations

cSAR3D closes the gap between innovation and Compliance.

 
MEASUREMENT

Feb 21, 2017

Contact
info@speag.swiss

 

New Holder Adaptor Eliminates All Steps on Testing Its Influence on SAR

The new low-loss low-permittivity adaptor eliminates all steps on testing the holders influence on SAR measurements.

 
MEASUREMENT

Feb 2, 2017

Contact
info@speag.swiss

 

Making Waves: Revolutionary Probe for 5G

The novel EUmmWV2 probe enables precise very close near-field measurements for frequencies up to 110 GHz.

 
CORPORATE

Feb 1, 2017

Contact
info@speag.swiss

 

Zurich43 Retreat 2017 at Pilatus Kulm - Communication

Twenty-five Zurich43 associates and three IT'IS Foundation board members gathered in the historic Hotel Pilatus-Kulm high above Luzern 30 – 31 January 2016 for their annual retreat, this year on communication. The goal of the two-day retreat was to find ways to improve communication skills across various target groups, channels, and markets, both within Z43 and with the outside world.

 
MEASUREMENT

Jan 27, 2017

Contact
info@speag.swiss

 

cSAR3D Cal Lab

SPEAG invests in the future of dry SAR testing systems: New standards drive dedicated Cal Lab

In order to comply with the requirements of the upcoming IEC 62209/ Part 3 SAR testing standards, SPEAG has set up a dedicated laboratory for calibrating ‘dry’ SAR testing systems at their manufacturing facility located in the heart of Zurich. The laboratory complements their already existing and well-established ‘wet’ SAR system service centre.

 
CORPORATE

Jan 24, 2017

Contact
info@speag.swiss

 

X-TRA, X-TRA! Inaugural Zurich43 Party: X-TRAordinary Nine = X-TRAordinary Fun!

The 2017 Z43 annual party held at Zurich’s X-TRA concert hall celebrated the emerging corporate identity and global reach of the Z43 brand.

 
CORPORATE

Jan 23, 2017

Contact
info@speag.swiss

 

EMPIR-Funded Project: Metrology for Inductive Charging of Electric Vehicles

SPEAG is a partner on the recently approved EMPIR-funded project “Metrology for Inductive Charging of Electric Vehicles”.

 
MEASUREMENT

Jan 10, 2017

Contact
info@speag.swiss

 

New Free-Space Probes for Precise Near-Field Characterization from 4 – 30 MHz

Novel magnetic and electric field probes suited for precise measurements in the closest vicinity of WPT systems or other sources operating in the low MHz range.

 
MEASUREMENT

Dec 29, 2016

Contact
info@speag.swiss

 

cSAR3D Release V2.8

In response to several user requests, SPEAG has added a quick and intuitive measurement setup feature to its cSAR3D software that is optimal for quick & easy measurements as needed in R&D applications or for special analyses. A new remote interface now provides an exceptional level of convenience for QA testing by allowing sites to use their own automated test software and analysis tools, and extending scalability to multi-site environments.

 
Page 14 of 32
 
 
Latest News