Swissmade
NEWS
Jul 26, 2022
MEASUREMENT

DASY8-3D – cSAR3D-A Redesigned

SPEAG proudly presents DASY83D, an effective and modular combination of DASY8 and cSAR3D that retains all the benefits of the DASY8 Modules and cSAR3D and enables versatile and precise automated testing.

In 2018, SPEAG released cSAR3D-A, our first system for automated specific absorption rate (SAR) testing, which was loved by our customers, but proved not to be modular and versatile enough to quickly adopt to the testing needs created by new exposure control features combining time-averaged SAR, proximity and motion sensors.

SPEAG did not shy away from the major effort of starting from scratch, and completely redesigned the cSAR3D-A system using all the technologies developed in-house in the meantime, such as the modularity of the DASY8 Modules and our Jupyter Notebook-based solutions. The focus was on maximizing precision and providing an easy-to-use user interface that allows user-defined testing protocols. 

The result is DASY83D.

DASY83D is modular in hardware and software – any DASY8 and cSAR3D system can be upgraded to DASY83D. The software is based on the new DASY8 Module c3D V1.0 and the Jupyter Notebook DASY83D, and interacts with cSAR3D via its advanced application programming interfaces. The first version of the DASY83D software is still limited, but already has several important test functionalities and features:

  • Precision of device positioning on the cSAR3D phantoms of 0.1 mm and 0.1º;

  • Speed through automation without compromising measurement accuracy;

  • Reduced operator errors;

  • Accurate evaluation of SAR distance and position dependence, including proximity sensors.

In the coming months, SPEAG will add many new features, and focus on smart and smooth integration of different base station simulators.

For further information, please contact us at info@speag.swiss or via any of our sales channels.

 

CORPORATE

Jun 18, 2018

Contact
info@speag.swiss

 

Successful Exhibition at IEEE MTTS-IMS 2018 in Philadelphia

Successful exhibition at this year's IEEE MTT-S 2018 International Microwave Symposium in Philadelphia PA, where SPEAG showcased a range of new high-performance smart products explicitly designed to cover 5G technologies.

 
MEASUREMENT

Jun 12, 2018

Contact
info@speag.swiss

 

Release of New OTA Phantom Series for 5G and IoT

SPEAG released a new generation of phantoms covering the entire frequency range from 3 GHz to over 100 GHz. The solution is both simple and elegant and improves the surface quality and sustainability of the phantoms.

 
MEASUREMENT

Jun 6, 2018

Contact
info@speag.swiss

 

5G Module V1-2: Offering More Automation, Features and Speed

Power density compliance testing has never been easier: SPEAG’s latest software release, Version 1.2 of our 5G Module, is yet another step forward in our drive to provide you with even more automated and more versatile tools for analysis and assessment of compliance at frequencies above 10 GHz!

 
CORPORATE

May 28, 2018

Contact
info@speag.swiss

 

13th Annual Hardware and Software Workshop Series in Taiwan and China Organized by AUDEN Technology Corporation

Another Successful Hardware and Software Workshop for SPEAG and ZMT Zurich MedTech AG in Taipei, Beijing, Shanghai, and Shenzhen in May 2018.

 
SIMULATION

May 25, 2018

Contact
semx-support@speag.swiss

 

SPEAG’s SEMCAD X 5G Toolkit Gets Tested for Phased-Array Antenna Design and Optimization

SEMCAD X’s 5G Toolkit put to the test: A user video demonstrates the design workflow of on-device phased-array antennas by exploiting the features of the new SEMCAD X 5G Toolkit, including the unique worst-case power density evaluator.

 
MEASUREMENT

Apr 11, 2018

Contact
info@speag.swiss

 

cDASY6 V6.6 – Ready for IoT Compliance Testing

SPEAG released cDASY6.6 which is fully compatible with IEC 62232 and the voting drafts of IEC 62209-U / IEC 62209-3 and from which DASY6 customers can benefit with immediate effect.

 
SIMULATION

Feb 20, 2018

Contact
semx-support@speag.swiss

 

SEMCAD X Matterhorn Release V17.0

SPEAG is proud to announce a major release of SEMCAD X Matterhorn V17.0! With the new release, we are particularly proud to make our innovative and easy-to-use multi-parameter, multi-goal Optimizer Framework V1 available to all of our customers.

 
MEASUREMENT

Feb 13, 2018

Contact
info@speag.swiss

 

cDASY6.6 Beta-Release

Ahead of the official release of cDASY6.6 on March 6, 2018, SPEAG has made a Beta version available for early adopters. cDASY6.6 includes many striking features, such as the full integration of specific phantoms, and the Fast Volume Scan.

 
MEASUREMENT

Feb 6, 2018

Contact
info@speag.swiss

 

cSAR3D-A: Fully Automated SAR Testing

cSAR3D-A Version 1 combines the most reliable vector-based array system cSAR3D with the precision robot of DASY6. It enables fully automated SAR evaluations with thousands of single SAR measurements - with only one click.

 
CORPORATE

Jan 19, 2018

Contact
info@speag.swiss

 

SPEAG and ZMT Sales Agents Event 2018

Sales agents representing SPEAG and ZMT Zurich MedTech AG (ZMT) products around the globe convened at Z43 17 – 19 January 2018 to learn about the whole range of products and technologies and the latest developments. Representatives from both long-time and new partners attended the 3-day event, which was a great opportunity for fruitful and in-depth discussions and face-to-face information transfer.

 
Page 10 of 32