Swissmade
NEWS
May 17, 2022
MEASUREMENT

DASY8/6 Module HAC V1.2: Packed with New Features

Simplified procedures, additional viewer options, and more: SPEAG has further improved the user experience when testing compatibility with DASY8/6 Module HAC V1.2 between a wireless device and hearing aids according to ANSI C63.19-2019.

After the successful launch of the first version of our hearing aid compatibility module, DASY8/6 Module HAC V1.0, in November 2021, SPEAG has further improved the features and workflow of the module based on valuable customer feedback. Streamlined procedures and improved visualizations now make it easier and smoother to demonstrate compliance with ANSI C63.19-2019.

Compatibility with Windows 10/1

Module HAC V1.2 supports the latest hardware revision of the Audio Magnetic Measurement Instrument (AMMI). Based on the Roland Rubix22 USB audio interface, it is fully compatible with Windows 10/11.

Simplified Procedure

In Module HAC V1.2, the hearing aid compatibility test arch position and probe calibration results are persistent. It is no longer necessary to import them after restarting the Jupyter notebook – the last used values are automatically restored.

AngleCalibration

System response during probe angle determination

 

Automated Calculation of Codec / System Delay

The audio signal emitted by the wireless device under test may be delayed due to the codec latency. In Module HAC V1.2, this parameter no longer needs to be evaluated manually: it is now determined automatically in post-processing.

Additional Viewer Options

The field viewer comes with many new features: for example, users can now edit the color bar range and export all displayed data. In addition, the spectrally weighted undesired magnetic noise can now be visualized.

FieldViewer

H-field distribution for a Telephone Magnetic Field Simulator (TMFS) measured in transverse orientation. The color bar range is editable

 

Intuitive Communication System User Interface

The communication system selection has also been further improved: the layout is more user-friendly and the most frequently used test channels (low/middle/high) are more prominently highlighted.

CommunicationSystems

Selection of the communication system to be measured

 

Improved Post-Processing of Undesired Audio Band Magnetic Field

The post-processing algorithm for evaluating the undesired magnetic field in the audio band has been improved to avoid overestimation of when low-frequency components dominate.

 

DASY8/6 Module HAC V1.2, together with the updated manuals, can be downloaded here.

Your feedback helps us to constantly improve our products and services. If you have thoughts and suggestions, please reach out to us at support@speag.swiss.

For further information on DASY8/6 Module HAC V1.2 or any of our other products, please contact us at info@speag.swiss or via any of our sales channels.

 

SIMULATION

Sep 7, 2010

Contact
semx-support@speag.swiss

 

SEMCAD X Student Research Award 2009 Winners

Schmid & Partner Engineering AG (SPEAG) is very pleased to announce the winners of SEMCAD X Student Research Award 2009.

 
MEASUREMENT

Aug 25, 2010

Contact
info@speag.swiss

 

August 24-25 Installation of DASY52NEO at NIM Beijing

August 24-25 Installation of DASY52NEO at NIM Beijing

 
MEASUREMENT

Aug 24, 2010

Contact
info@speag.swiss

 

iSAR² V2.2 Software Release

We have released iSAR² software version 2.2. New features include remote control of the iSAR² using customer-specific programs, enhanced graphical information of the iSAR² operation, and full compatibility with Windows 7 and Windows XP in 32-bit and 64-bit versions.

 
SIMULATION

Aug 10, 2010

Contact
semx-support@speag.swiss

 

SEMCAD X v14.2.3 Release

The SEMCAD X Team is pleased to announce the release of SEMCAD X v14.2.3, an update of SEMCAD X Aletsch v14.2.

 
MEASUREMENT

Jul 17, 2010

Contact
info@speag.swiss

 

New Product: DC/ELF Magnet Field Probe (DASY52NEO Compatible)

SPEAG started to integrate 3rd-Party Probes for our DASY52 NEO systems. The first probes are the 3-axis hall field probe series from MetroLab that enpower DASY52NEO to scan DC/ELF magnetic fields with high precision. 

 
MEASUREMENT

Jul 16, 2010

Contact
info@speag.swiss

 

New Product: MEM (Membran) Phantom

The new MEM Phantom was desgined and optimized for compliance testing of wireless devices and other electromagnetic emmitting devices that may be partially surrounded by tissue or in direct contact with the skin, e.g., wireless hands-free kits, hearing aids, skin mounted devices, inductive activators, etc.  

 
SIMULATION

Jul 14, 2010

Contact
semx-support@speag.swiss

 

SEMCAD X Workshop Raffle Winner

At the end of the SEMCAD X User Meeting & Workshop at APS/URSI 2010, a NVIDIA Tesla C1060 card & Acceleware Token license was given away in a raffle.

 
MEASUREMENT

May 13, 2010

Contact
info@speag.swiss

 

New Product: CRANE for iSAR²

SPEAG is introducing the CRANE for iSAR². CRANE enables testing of wireless devices on the iSAR² Flat or Head with headsets or data cables attached.

 
MEASUREMENT

May 6, 2010

Contact
info@speag.swiss

 

New Product: Broad-Band Liquids for new IEC/IEEE standards

SPEAG introduces a new series of tissue simulating liquids that are broad-band based on the environmental friendlier Tween ingredient and fully compliant with the new IEC/IEEE standards allowing ±10% tolerance on the liquid parameters.

 
SIMULATION

May 4, 2010

Contact
semx-support@speag.swiss

 

NRC, with SPEAG, offers a unique software platform for MRI system design

The National Research Council Institute for Biodiagnostics (NRC-IBD) has teamed up with SPEAG to offer a unique software platform for magnetic resonance imaging (MRI) scanner design. The new platform seamlessly integrates powerful new tools for radiofrequency (RF) array design and post-processing and is the first software of its kind to combine all the tools needed to design RF-phased arrays into a single user friendly program.

 
Page 29 of 32
 
 
Latest News