DASY8/6 Module WPT V2.0: Enhanced and Fast WPT Compliance Testing
SPEAG released DASY8/6 Module WPT V2.0, which integrates the new MAGPy Version 2 with the DASY8/6 system and provides 8-times faster, more accurate, and total field (magnetic and electric field) compliance testing of sources emitting any periodic signals (<10 MHz) against the basic restrictions.
The latest version of our DASY8/6 Module WPT, V2.0, is now based on MAGPy Version 2 and takes full advantage of this stand-alone product. Evaluating wireless power transfer (WPT) systems has never been so quick and easy with maximum precision:
8× faster measurements, as the new probes allow assessment of the eight isotropic magnetic (H-)field probes (23 sensors plus phase) at each robot position;
Simultaneous measurement of the incident electric (E-)field with its integrated isotropic E-field sensor;
Evaluation of periodic signals with non-sinusoidal waveforms and duty cycles;
Evaluation of all basic restriction quantities, now also including the local non-averaged induced E-field required by ISED;
Conversion of the measured H-field distribution into a Maxwell field and calculation of the fields in the standardized phantom without loss of precision (Tier 4 of IEC 63184);
This user video shows how the MAGPy Version 2 probe, integrated with DASY8/6 Module WPT V2.0, is used to determine compliance for wireless power transfer devices.
Another important advantage is the dual use of the MAGPy system as a hand-held system (MAGPy Version 2) and as part of Module WPT (DASY8/6 Module WPT V2.0), as customers only need to buy and calibrate one device.
If you have any suggestions or would like to receive further information, please contact us at firstname.lastname@example.org.
We are pleased to announce the release of our TDS Standalone systems. TDS Standalone is the first product of our growing TDS product range to employ SPEAG’s novel active optical sensor technology for E- and H-field measurements in the frequency range from 10 MHz – 6 GHz.
*available in the US and Canada after final certification in accordance with the regulations of the US FDA, CDRH, CFR 21, Section I, subchapter J, part 1002 to 1040.11 (expected in May 2013).
We are pleased to announce the release of the optimized high frequency dielectric probe DAK-1.2 covering the frequency range 5 – 50 GHz. At the same time, we extended and improved the features of our software that is now available for download.
This AIA enables the DASY52 Users to directly measures the Modulation Interference Factor (MIF) and the Probe Modulation Factor (PMF) of modulated radiofrequency (RF) signals. It is also perfectly suited for establishing the connection between base-station emulator and the device under test (DUT).
The success and achievements of the Bell Labs have inspired generations of engineers, physicists, product developers, and other scientists. These accomplishments and the success stories of our greatest inventors have also inspired 21 Speag, ZMT, and IT'IS coworkers who gathered in Flüeli-Ranft on Novenber 22nd-23rd to get under the hood of our our own innovation engine.