Swissmade
NEWS
24/11/2020
MEASUREMENT

cDASY6 Module WPT Release – Our New MAGPy Technology for DASY6

MAGPy, SPEAG’s new product line for time-domain field measurements ≤10 MHz, has been combined with DASY6. The result is the new cDASY6 Module WPT that is optimized for advanced compliance testing of wireless power transfer devices according to the latest IEC/IEEE63184 DPAS draft and that expands the frequency range of DASY6 to below 4 MHz.

There is an increasing demand by regulators for rigorous and scientifically sound compliance testing of wireless power transfer (WPT) system below 4 MHz. New standards are currently being finalized for WPT that operate between 1 kHz and >100 GHz. While SPEAG's existing solutions enable compliance testing from 4 MHz – 110 GHz, the frequency range below 4 MHz was not covered until now. In order to close this gap, SPEAG and the IT'IS Foundation, together with several international research partners, launched a number of research projects to explore the coupling mechanism as well as the assessment methods and procedures. In parallel, SPEAG started to develop a new product line: the Magnetic Amplitude and Gradient Probe System (MAGPy).

MAGPy was specifically developed for compliance evaluations of WPT systems and any other strong magnetic near-field sources operating at frequencies of 3 kHz − 10 MHz with respect to reference levels but also basic restrictions. It is the only product worldwide offering this feature.

Today we are proud to announce the release of cDASY6 Module WPT, the first product for our DASY6 system that is based on the innovative MAGPy technology.

cDASY6 Module WPT is designed to demonstrate compliance with the basic restrictions of any magnetic source from 3 kHz − 4 MHz with maximal precision and is fully compliant with IEC/IEEE63184 DPAS. As all SPEAG products, it is optimized for maximum precision and conservative assessments but with minimal overestimation. cDASY6 Module WPT allows to certify devices with up to 70 dB more currents than if compared to the reference levels.

How does it work? The video shows a first glimpse into the concept and implementation of cDASY6 Module WPT.

For further information or to receive a quotation, please contact us at info@speag.swiss or any of our sales channels.

 

MEASUREMENT

24/11/2020

Contact
info@speag.swiss

 

cDASY6 Module WPT Release – Our New MAGPy Technology for DASY6

SPEAG’s new cDASY6 Module WPT is the first-ever solution to demonstrate compliance with the basic restrictions of any magnetic source according to the latest IEC/IEEE63184 DPAS draft. The module is based on SPEAG’s new MAGPy product line.

 
MEASUREMENT

10/11/2020

Contact
info@speag.swiss

 

Use of DASY6 for Devices Operating at 6 – 10 GHz

In October, FCC issued new interim procedures for demonstrating compliance between 6 – 10 GHz. Just a few weeks later, we are happy to provide a scientifically rigorous solution that enables DASY6 users to meet these new requirements.

 
SIMULATION

27/10/2020

Contact
semx-support@speag.swiss

 

SEMCAD X Matterhorn Major Release V19.0

SPEAG are pleased to announce SEMCAD X Matterhorn V19.0, our full-wave 3D electromagnetic (EM) simulation software and specialized subpackage of Sim4Life V6.0.

 
MEASUREMENT

01/09/2020

Contact
info@speag.swiss

 

cSAR3D V4.0: A Breakthrough in Array System Technology

With the release of cSAR3D V4.0, SPEAG introduces the novel X10 Combiner for high-resolution measurements. It enables SAR and absorbed power density testing from 6 – 10 GHz while also improving the overall measurement accuracy..

 
MEASUREMENT

18/08/2020

Contact
info@speag.swiss

 

cDASY6 Module WPT Pre-Release – Our New MAGPy Technology for DASY6

SPEAG’s new cDASY6 Module WPT is the first-ever solution to demonstrate compliance with the basic restrictions of any magnetic source according to the latest IEC/IEEE63184 DPAS draft. The module is based on SPEAG’s new MAGPy product line.

 
MEASUREMENT

29/07/2020

Contact
info@speag.swiss

 

mmWave ½SAM Phantoms Extend OTA Testing in CATR for 5G FR2 Devices

SPEAG releases the new mmW-½SAMR/L-V11 phantom packages for over-the-air testing at frequencies from 6 to >100 GHz.

 
MEASUREMENT

28/07/2020

Contact
info@speag.swiss

 

Publications Confirm: DASY6 is the Most Accurate SAR System

Scientific debate corroborates that SPEAG's DASY6 probe-scanning system has low measurement errors (<3%) for simple antennas and provides further support of the robustness of the latest IEC 62209 standard

 
MEASUREMENT

22/07/2020

Contact
info@speag.swiss

 

DASY6 and cSAR3D: Detailed Guidance for 5G NR FR1

Two new Application Notes provide detailed guidelines for testing 5G NR FR1 radios using DASY6 and cSAR3D. Also, SPEAG’s calibration lab just received ISO/IEC 17025 accreditation.

 
CORPORATE

25/06/2020

Contact
info@speag.swiss

 

Z43 Goes Carbon Dioxide-Free

SPEAG is getting greener! We have installed a new energy system consisting of solar panels and a groundwater-based heat pump. We are proud that we have started to generate our own power and have become largely CO2-free.

 
MEASUREMENT

18/06/2020

Contact
info@speag.swiss

 

cDASY6 Module SAR V6.14: Time-Efficient SAR Evaluation Thanks to Smart Zoom Scan

Smart Zoom Scan in cDASY6 Module SAR V6.14: Simplified and accelerated workflow for SAR compliance testing.

 
Page 1 of 29