Swissmade
NEWS
29/07/2020
MEASUREMENT

mmWave ½SAM Phantoms Extend OTA Testing in CATR for 5G FR2 Devices

SPEAG’s two new mmWave ½SAM phantoms are optimized for testing mobile phone and other ear-mounted devices in talk mode at frequencies from 6 to >100 GHz and meet the quiet zone and weight restrictions of mmWave CATR and OTA chambers.

With the release of the new mmWave ½SAM right and left head phantoms, SPEAG is extending the frequency coverage from <0.3 – 6 GHz to 0.3 – >100 GHz, thus allowing its customers to perform reliable and repeatable over-the-air (OTA) performance evaluations of devices including 5G New Radio Frequency Range 2 and any other mmWave wireless operating systems. The mmW-½SAMR/L-V11 packages consist of the right or left head phantom, the mounting structure, a 6-degree positioning mask, and our universal talk-mode fixtures compatible with all of our talk-mode hands. Each package:

  • is fully compliant with the target values of current and future CTIA test plans and the reflection properties of the human skin for frequencies >100 GHz;
  • is optimized for use in compact antenna test ranges (CATR) or other chambers for OTA evaluations with a 30 cm quiet zone or larger;
  • has a half-head geometry compliant with SAM data as defined by IEEE, 3GPP, and CTIA and is available for right and left-hand usage, whereas the deviation to the full SAM head phantom is <0.2 dB for frequencies >6 GHz;
  • is light weight with only 2.5 kg.

The new mmW-½SAMR/L-V11 phantom packages are an advanced solution for passive and active OTA testing from 6 to >100 GHz.

To receive a quotation or for further information, please contact us at info@speag.swiss.

MEASUREMENT

12/06/2018

Contact
info@speag.swiss

 

Release of New OTA Phantom Series for 5G and IoT

SPEAG released a new generation of phantoms covering the entire frequency range from 3 GHz to over 100 GHz. The solution is both simple and elegant and improves the surface quality and sustainability of the phantoms.

 
MEASUREMENT

06/06/2018

Contact
info@speag.swiss

 

5G Module V1.2: Offering More Automation, Features and Speed

Power density compliance testing has never been easier: SPEAG’s latest software release, Version 1.2 of our 5G Module, is yet another step forward in our drive to provide you with even more automated and more versatile tools for analysis and assessment of compliance at frequencies above 10 GHz!

 
CORPORATE

28/05/2018

Contact
info@speag.swiss

 

13th Annual Hardware and Software Workshop Series in Taiwan and China Organized by AUDEN Technology Corporation

Another Successful Hardware and Software Workshop for SPEAG and ZMT Zurich MedTech AG in Taipei, Beijing, Shanghai, and Shenzhen in May 2018.

 
SIMULATION

25/05/2018

Contact
semx-support@speag.swiss

 

SPEAG’s SEMCAD X 5G Toolkit Gets Tested for Phased-Array Antenna Design and Optimization

SEMCAD X’s 5G Toolkit put to the test: A user video demonstrates the design workflow of on-device phased-array antennas by exploiting the features of the new SEMCAD X 5G Toolkit, including the unique worst-case power density evaluator.

 
MEASUREMENT

11/04/2018

Contact
info@speag.swiss

 

cDASY6 V6.6 – Ready for IoT Compliance Testing

SPEAG released cDASY6.6 which is fully compatible with IEC 62232 and the voting drafts of IEC 62209-U / IEC 62209-3 and from which DASY6 customers can benefit with immediate effect.

 
SIMULATION

20/02/2018

Contact
semx-support@speag.swiss

 

SEMCAD X Matterhorn Release V17.0

SPEAG is proud to announce a major release of SEMCAD X Matterhorn V17.0! With the new release, we are particularly proud to make our innovative and easy-to-use multi-parameter, multi-goal Optimizer Framework V1 available to all of our customers.

 
MEASUREMENT

13/02/2018

Contact
info@speag.swiss

 

cDASY6.6 Beta-Release

Ahead of the official release of cDASY6.6 on March 6, 2018, SPEAG has made a Beta version available for early adopters. cDASY6.6 includes many striking features, such as the full integration of specific phantoms, and the Fast Volume Scan.

 
MEASUREMENT

06/02/2018

Contact
info@speag.swiss

 

cSAR3D-A: Fully Automated SAR Testing

cSAR3D-A Version 1 combines the most reliable vector-based array system cSAR3D with the precision robot of DASY6. It enables fully automated SAR evaluations with thousands of single SAR measurements - with only one click.

 
CORPORATE

19/01/2018

Contact
info@speag.swiss

 

SPEAG and ZMT Sales Agents Event 2018

Sales agents representing SPEAG and ZMT Zurich MedTech AG (ZMT) products around the globe convened at Z43 17 – 19 January 2018 to learn about the whole range of products and technologies and the latest developments. Representatives from both long-time and new partners attended the 3-day event, which was a great opportunity for fruitful and in-depth discussions and face-to-face information transfer.

 
CORPORATE

19/01/2018

Contact
info@speag.swiss

 

Game On! Z43’s Annual Party, 2018 “The Next Level” Edition!

The annual Zurich 43 party, this year with the gamer theme “The Next Level”, was held at Halle 622 in Zurich-Oerlikon on Friday 19 January 2018.

 
Page 7 of 29
 
 
Latest News