Swissmade
NEWS
29/07/2020
MEASUREMENT

mmWave ½SAM Phantoms Extend OTA Testing in CATR for 5G FR2 Devices

SPEAG’s two new mmWave ½SAM phantoms are optimized for testing mobile phone and other ear-mounted devices in talk mode at frequencies from 6 to >100 GHz and meet the quiet zone and weight restrictions of mmWave CATR and OTA chambers.

With the release of the new mmWave ½SAM right and left head phantoms, SPEAG is extending the frequency coverage from <0.3 – 6 GHz to 0.3 – >100 GHz, thus allowing its customers to perform reliable and repeatable over-the-air (OTA) performance evaluations of devices including 5G New Radio Frequency Range 2 and any other mmWave wireless operating systems. The mmW-½SAMR/L-V11 packages consist of the right or left head phantom, the mounting structure, a 6-degree positioning mask, and our universal talk-mode fixtures compatible with all of our talk-mode hands. Each package:

  • is fully compliant with the target values of current and future CTIA test plans and the reflection properties of the human skin for frequencies >100 GHz;
  • is optimized for use in compact antenna test ranges (CATR) or other chambers for OTA evaluations with a 30 cm quiet zone or larger;
  • has a half-head geometry compliant with SAM data as defined by IEEE, 3GPP, and CTIA and is available for right and left-hand usage, whereas the deviation to the full SAM head phantom is <0.2 dB for frequencies >6 GHz;
  • is light weight with only 2.5 kg.

The new mmW-½SAMR/L-V11 phantom packages are an advanced solution for passive and active OTA testing from 6 to >100 GHz.

To receive a quotation or for further information, please contact us at info@speag.swiss.

CORPORATE

10/09/2018

Contact
info@speag.swiss

 

Successful 2018 SPEAG and ZMT Hardware and Software Workshop in South Korea

DYMSTEC, SPEAG, and ZMT Zurich MedTech AG (ZMT) conducted their annual hardware and software workshop in South Korea on 6-7 September, 2018. Z43's sales channel for South Korea were the excellent local organizers of the event, which featured several presentations, workshops, and social events and included live English-Korean translation service.

 
MEASUREMENT

21/08/2018

Contact
info@speag.swiss

 

Customized Phantoms with Unique Use-Factors Accelerate the Development & Testing of Wireless Devices

SPEAG has established a fast, reliable, and cost-effective workflow for development and manufacturing of any customized electromagnetic phantom that provides representative and repeatable testing.

 
MEASUREMENT

14/08/2018

Contact
info@speag.swiss

 

New DASY Software Feature: Improved Precision for Capacitive Coupled Sources Ahead of Standardization

In line with the upcoming IEC 62209-2 amendment release, SPEAG once again sets the benchmark by providing the solution to measure transmitters in touch with a phantom with maximum precision.

 

 
MEASUREMENT

07/08/2018

Contact
info@speag.swiss

 

New Software Release DAK Version 2.4.1.144

We are pleased to announce the release of DAK software version 2.4.1.144. Based on the valuable feedback from our rapidly growing customer base, this important maintenance release further improves the accuracy, repeatability, and user experience of measurements with our DAK product line.

 

 
CORPORATE

22/07/2018

Contact
info@speag.swiss

 

SPEAG Changes Domain Name to dot(.)swiss

Another important milestone in Z43 history: SPEAG is proud to announce the introduction of our brand-new domain name www.speag.swiss!

 
MEASUREMENT

10/07/2018

Contact
info@speag.swiss

 

Release of Optical Head for Vector Network Analyzers

SPEAG is proud to announce the release of OH4VNA - a miniaturized optical head for cable-free testing of electrically small antennas between 500 MHz – 6 GHz.

 
CORPORATE

09/07/2018

Contact
info@speag.swiss

 

Niels Kuster Presents Keynote Lecture on IoT at Symposium Co-Organized by the AUDEN Group and the IEEE EMC Chapter

SPEAG's President of the Board Niels Kuster presented keynote lectures on “EM Evaluation and Optimization of IoT Systems: Standards, Software and Instrumentations” and “Workflow for Demonstration of Compliance of Transmitters Operating above 10 GHz” at a symposium on IoT co-organized by the AUDEN Group and the IEEE EMC Chapter in Taipei on July 4, 2018. 

 
MEASUREMENT

03/07/2018

Contact
info@speag.swiss

 

Communication Systems Update

Updated communication system summary for usage with DASY6 and cSAR3D.

 

 
MEASUREMENT

26/06/2018

Contact
info@speag.swiss

 

POPEYE-V10: Just Like a Human but Stronger and Consistent

SPEAG is proud to introduce POPEYE Version 10, our redesigned electromagnetic human body phantom that introduces striking new details in addition to its main features.

 
CORPORATE

18/06/2018

Contact
info@speag.swiss

 

Successful Exhibition at IEEE MTTS-IMS 2018 in Philadelphia

Successful exhibition at this year's IEEE MTT-S 2018 International Microwave Symposium in Philadelphia PA, where SPEAG showcased a range of new high-performance smart products explicitly designed to cover 5G technologies.

 
Page 6 of 29
 
 
Latest News