Swissmade
NEWS
29/07/2020
MEASUREMENT

mmWave ½SAM Phantoms Extend OTA Testing in CATR for 5G FR2 Devices

SPEAG’s two new mmWave ½SAM phantoms are optimized for testing mobile phone and other ear-mounted devices in talk mode at frequencies from 6 to >100 GHz and meet the quiet zone and weight restrictions of mmWave CATR and OTA chambers.

With the release of the new mmWave ½SAM right and left head phantoms, SPEAG is extending the frequency coverage from <0.3 – 6 GHz to 0.3 – >100 GHz, thus allowing its customers to perform reliable and repeatable over-the-air (OTA) performance evaluations of devices including 5G New Radio Frequency Range 2 and any other mmWave wireless operating systems. The mmW-½SAMR/L-V11 packages consist of the right or left head phantom, the mounting structure, a 6-degree positioning mask, and our universal talk-mode fixtures compatible with all of our talk-mode hands. Each package:

  • is fully compliant with the target values of current and future CTIA test plans and the reflection properties of the human skin for frequencies >100 GHz;
  • is optimized for use in compact antenna test ranges (CATR) or other chambers for OTA evaluations with a 30 cm quiet zone or larger;
  • has a half-head geometry compliant with SAM data as defined by IEEE, 3GPP, and CTIA and is available for right and left-hand usage, whereas the deviation to the full SAM head phantom is <0.2 dB for frequencies >6 GHz;
  • is light weight with only 2.5 kg.

The new mmW-½SAMR/L-V11 phantom packages are an advanced solution for passive and active OTA testing from 6 to >100 GHz.

To receive a quotation or for further information, please contact us at info@speag.swiss.

CORPORATE

10/06/2019

Contact
info@speag.swiss

 

5G Solutions Exhibited at IEEE MTTS-IMS 2019 in Boston

SPEAG showcased a range of new high-performance smart products explicitly designed to cover 5G technologies at IEEE MTT-S 2019 International Microwave Symposium in Boston, USA.

 
MEASUREMENT

06/06/2019

Contact
info@speag.swiss

 

Release of DASY52.10.2 Software Update

SPEAG announces release of the DASY52 software release with final implementation of scanning requirements as per IEC 62209-2 amendment 

 
CORPORATE

30/05/2019

Contact
info@speag.swiss

 

Annual Z43-Auden Workshop Series in China and Taiwan: 14th Edition a Great Success!

AUDEN Technology Corporation, together with SPEAG and ZMT Zurich MedTech AG, hosted our popular annual hardware & software workshop series in China and Taiwan in June 2019. Almost 300 participants from industry and academia were introduced to Z43's latest solutions for exposure evaluation and compliance testing from wireless power transfer to 5G mmWave applications.

 
MEASUREMENT

22/05/2019

Contact
info@speag.swiss

 

FCC Update on MAIA usage in cDASY6

We are pleased to announce that SPEAG received FCC's official confirmation on full acceptance of MAIA as well as further guidance on the reporting.

 
MEASUREMENT

20/05/2019

Contact
info@speag.swiss

 

Release of cDASY6 Module mmWave V1.6.2

SPEAG announces release of the intermittent cDASY6 Module mmWave V1.6.2.

 
MEASUREMENT

16/04/2019

Contact
info@speag.swiss

 

First Whole-Body Phantom WBBDuke for DASY6

With the release of whole-body back phantom WBBDuke, SPEAG’s DASY6 is ready to demonstrate SAR compliance in specific phantoms for any IoT devices.

 
MEASUREMENT

01/04/2019

Contact
info@speag.swiss

 

mmWAVE Phantom for DASY6 Systems

SPEAG released the mmWAVE phantom in direct response to the need for evaluating the power density distributions on any of the six faces of wireless devices.

 
MEASUREMENT

26/03/2019

Contact
info@speag.swiss

 

Update from FCC on 5G NR sub-6GHz NSA SAR Measurements

SPEAG is committed to continuously supporting and guiding the wireless industry through the rapid 5G development. 

 
CORPORATE

01/03/2019

Contact
info@speag.swiss

 

SPEAG Exhibition at MWC19 in Barcelona

Busy times at the SPEAG booth at the Mobile World Congress in Barcelona where our experts discussed the measurement needs of our customers on simulation tools to verification of electromagnetic nearfield measurement problems.

 
MEASUREMENT

19/02/2019

Contact
info@speag.swiss

 

Release of cDASY6 Module mmWave V1.6

SPEAG released the cDASY6 Module mmWave V1.6 with many small but important new features that make compliance testing and documentation easier and faster.

 
Page 4 of 29
 
 
Latest News