Swissmade
NEWS
29/07/2020
MEASUREMENT

mmWave ½SAM Phantoms Extend OTA Testing in CATR for 5G FR2 Devices

SPEAG’s two new mmWave ½SAM phantoms are optimized for testing mobile phone and other ear-mounted devices in talk mode at frequencies from 6 to >100 GHz and meet the quiet zone and weight restrictions of mmWave CATR and OTA chambers.

With the release of the new mmWave ½SAM right and left head phantoms, SPEAG is extending the frequency coverage from <0.3 – 6 GHz to 0.3 – >100 GHz, thus allowing its customers to perform reliable and repeatable over-the-air (OTA) performance evaluations of devices including 5G New Radio Frequency Range 2 and any other mmWave wireless operating systems. The mmW-½SAMR/L-V11 packages consist of the right or left head phantom, the mounting structure, a 6-degree positioning mask, and our universal talk-mode fixtures compatible with all of our talk-mode hands. Each package:

  • is fully compliant with the target values of current and future CTIA test plans and the reflection properties of the human skin for frequencies >100 GHz;
  • is optimized for use in compact antenna test ranges (CATR) or other chambers for OTA evaluations with a 30 cm quiet zone or larger;
  • has a half-head geometry compliant with SAM data as defined by IEEE, 3GPP, and CTIA and is available for right and left-hand usage, whereas the deviation to the full SAM head phantom is <0.2 dB for frequencies >6 GHz;
  • is light weight with only 2.5 kg.

The new mmW-½SAMR/L-V11 phantom packages are an advanced solution for passive and active OTA testing from 6 to >100 GHz.

To receive a quotation or for further information, please contact us at info@speag.swiss.

SIMULATION

23/10/2009

Contact
info@speag.swiss

 

iSEG V3.1 Release

Zurich Med Tech, a sister company of SPEAG, has developed iSEG, a medical image segmentation tool specially designed to construct realistic 3D human or animal models for SEMCAD X from medical image data. iSEG, the most versatile medical image segmentation tool currently available, quickly and easily creates highly detailed 3D human or animal models based on CT and MRI images in standard image formats. The resulting models can be used to study electromagnetic exposure and induced heating in living tissue.

 
MEASUREMENT

16/10/2009

Contact
info@speag.swiss

 

Final Release DASY52

The final release of DASY52 is a major upgrade representing the next leap in quality compliance testing of mobile phones and general near-field evaluations. The main new improvements are in the new GUI, Report Generator, Ultra-Fast SAR Procedures, and Advanced Probe Response Linearization.  Many more features that make the system compatible with the revised standards are expected to be released by the end of the year.

 
MEASUREMENT

12/10/2009

Contact
info@speag.swiss

 

Successful CTIA Audits of SPEAG Head and Hand Phantoms

SPEAG OTA phantoms with accessories were successfully tested during first CTIA V3.0 audits at ETS Lindgren, Austin on October 1st and Qualcomm, San Diego on October 9th.

 
MEASUREMENT

25/09/2009

Contact
info@speag.swiss

 

iSAR² Calibration is ISO/IEC 17025 Accredited

Schmid & Partner Engineering AG (SPEAG) is now accredited for iSAR calibration to the rigorous ISO/IEC 17025 quality standards. ISO/IEC 17025 is a laboratory quality standard that is widely recognized internationally. The addition of iSAR calibration to the SPEAG quality system provides a large portfolio of products for which SPEAG provides accredited calibration.

 
SIMULATION

17/08/2009

Contact
info@speag.swiss

 

Dellsoft as New SEMCAD X Reseller in India

Schmid & Partner Engineering AG (SPEAG) is pleased to announce a new partnership with Dellsoft Technologies, who will now act as a reseller of SEMCAD X in India. Dellsoft is a leading technical software company in India. Dellsoft's vision is to  achieve international standards of excellence and to be the leading supplier of technical software, learning programs, and other teaching platforms. Many years of experience in the software business and a strong technical support team will facilitate their efforts in providing SEMCAD X to companies in India. 

 
SIMULATION

06/07/2009

Contact
info@speag.swiss

 

SEMCAD X Student Research Award 2008 Winner Presentations

The SEMCAD X Student Research Award for 2008 prizes were presented to the winners during the June 2009 IEEE International Symposium on Antennas and Propagation (APS/URSI), in Charleston, SC, USA.

 
SIMULATION

01/07/2009

Contact
semx-support@speag.swiss

 

SEMCAD X Student Research Award 2008 Winners

Schmid & Partner Engineering AG (SPEAG) is very pleased to announce the winners of SEMCAD X Student Research Award 2008.

 
SIMULATION

29/05/2009

Contact
semx-support@speag.swiss

 

SEMCAD X in Nature Magazine

The results of a recent study using SEMCAD X have been published in the latest Nature magazine.

 
SIMULATION

29/05/2009

Contact
semx-support@speag.swiss

 

Release of SEMCAD X Aletsch V14.0

Encapsulating solution oriented technologies combined with the latest Acceleware Batuco drivers, SEMCAD X V14.0 Aletsch defines a new standard in high performance EM and Thermal simulation.

 
MEASUREMENT

18/02/2009

Contact
info@speag.swiss

 

iSAR² V2.0 Release

During the last 12 months we have completely redesigned the iSAR GUI and added many new functions. The iSAR software V2.0 is now released to all of our customers free of charge.

The series production of iSAR Head has begun and we already enjoy high demands. Please order now!

 
Page 28 of 29
 
 
Latest News