Swissmade
NEWS
29/07/2020
MEASUREMENT

mmWave ½SAM Phantoms Extend OTA Testing in CATR for 5G FR2 Devices

SPEAG’s two new mmWave ½SAM phantoms are optimized for testing mobile phone and other ear-mounted devices in talk mode at frequencies from 6 to >100 GHz and meet the quiet zone and weight restrictions of mmWave CATR and OTA chambers.

With the release of the new mmWave ½SAM right and left head phantoms, SPEAG is extending the frequency coverage from <0.3 – 6 GHz to 0.3 – >100 GHz, thus allowing its customers to perform reliable and repeatable over-the-air (OTA) performance evaluations of devices including 5G New Radio Frequency Range 2 and any other mmWave wireless operating systems. The mmW-½SAMR/L-V11 packages consist of the right or left head phantom, the mounting structure, a 6-degree positioning mask, and our universal talk-mode fixtures compatible with all of our talk-mode hands. Each package:

  • is fully compliant with the target values of current and future CTIA test plans and the reflection properties of the human skin for frequencies >100 GHz;
  • is optimized for use in compact antenna test ranges (CATR) or other chambers for OTA evaluations with a 30 cm quiet zone or larger;
  • has a half-head geometry compliant with SAM data as defined by IEEE, 3GPP, and CTIA and is available for right and left-hand usage, whereas the deviation to the full SAM head phantom is <0.2 dB for frequencies >6 GHz;
  • is light weight with only 2.5 kg.

The new mmW-½SAMR/L-V11 phantom packages are an advanced solution for passive and active OTA testing from 6 to >100 GHz.

To receive a quotation or for further information, please contact us at info@speag.swiss.

MEASUREMENT

06/05/2010

Contact
info@speag.swiss

 

New Product: Broad-Band Liquids for new IEC/IEEE standards

SPEAG introduces a new series of tissue simulating liquids that are broad-band based on the environmental friendlier Tween ingredient and fully compliant with the new IEC/IEEE standards allowing ±10% tolerance on the liquid parameters.

 
SIMULATION

04/05/2010

Contact
semx-support@speag.swiss

 

NRC, with SPEAG, offers a unique software platform for MRI system design

The National Research Council Institute for Biodiagnostics (NRC-IBD) has teamed up with SPEAG to offer a unique software platform for magnetic resonance imaging (MRI) scanner design. The new platform seamlessly integrates powerful new tools for radiofrequency (RF) array design and post-processing and is the first software of its kind to combine all the tools needed to design RF-phased arrays into a single user friendly program.

 
MEASUREMENT

06/03/2010

Contact
support@speag.swiss

 

New Product: PRE - 10

This new product PRE - 10 is a 3 channel voltage divider which extends the operation of existing SPEAG probes for use in very high fields (> 5 kV/m; > 10 kW/kg). It is compatible with all our E-Field, H-field and SAR probes.

 
SIMULATION

03/03/2010

Contact
info@speag.swiss

 

New SEMCAD X Distributor in Italy

Schmid & Partner Engineering AG (SPEAG) is pleased to announce a new partnership with Telprom, who will be responsible for selling SEMCAD X in Milano, Italy.

 

ISO 17025 Calibration of Dielectric Probes (OCP) now available

Our calibration laboratory has successfully established the capability for calibration of open-ended coaxial probes (OCP).

 
SIMULATION

24/02/2010

Contact
semx-support@speag.swiss

 

Release of SEMCAD X Aletsch V14.2

The SEMCAD X Team is pleased to announce the release of SEMCAD X V14.2 Aletsch, a major upgrade  six months of intense deincorporatingvelopment work. This release offers a range of powerful new features, more robust handling, as well as new customization options.

The relevant SEMCAD X for Win XP/ Win 7 and 32/64bit platforms are available for download.

 
MEASUREMENT

05/02/2010

Contact
support@speag.swiss

 

EASY4 V4.6 New release

The new EASY4 software release V4.6 extends the usage to fields with large peak-to-average (PAR) ratios by adaption to the improved probe modulation signal calibration and also includes setting of Access Levels. The changes to the user interface are minimal and old setup and calibration files are still compatible with this version.

 
MEASUREMENT

18/01/2010

Contact
info@speag.swiss

 

iSAR² V2.1 Software Release

A new iSAR2 software release is now available. This release is the result of the popularity of our ultra-fast SAR scanners (iSAR Head and iSAR Flat) and great suggestions from our customers. Version 2.1 of the iSAR software has several new features, including a new multi-iSAR interface, a smart Combiner feature, and full extension of the software for frequencies up to 6 GHz. It also includes enhancements to our existing features, such as an improved Python interface and enhanced control of the CMU200.

 
SIMULATION

01/01/2010

Contact
semx-support@speag.swiss

 

Events & Exhibitions in 2010

Meet SPEAG engineers at the following forthcoming major conferences, symposia and workshops in 2010

 
SIMULATION

10/11/2009

Contact
info@speag.swiss

 

Beacon Technical Sales, Inc. as New Distributor in U.S.A.

Schmid & Partner Engineering AG (SPEAG) is pleased to announce a new partnership with Beacon Technical Sales, Inc., who will be acting as a distributor of SEMCAD X in Nashua, U.S.A.

 
Page 27 of 29
 
 
Latest News