Swissmade
NEWS
29/07/2020
MEASUREMENT

mmWave ½SAM Phantoms Extend OTA Testing in CATR for 5G FR2 Devices

SPEAG’s two new mmWave ½SAM phantoms are optimized for testing mobile phone and other ear-mounted devices in talk mode at frequencies from 6 to >100 GHz and meet the quiet zone and weight restrictions of mmWave CATR and OTA chambers.

With the release of the new mmWave ½SAM right and left head phantoms, SPEAG is extending the frequency coverage from <0.3 – 6 GHz to 0.3 – >100 GHz, thus allowing its customers to perform reliable and repeatable over-the-air (OTA) performance evaluations of devices including 5G New Radio Frequency Range 2 and any other mmWave wireless operating systems. The mmW-½SAMR/L-V11 packages consist of the right or left head phantom, the mounting structure, a 6-degree positioning mask, and our universal talk-mode fixtures compatible with all of our talk-mode hands. Each package:

  • is fully compliant with the target values of current and future CTIA test plans and the reflection properties of the human skin for frequencies >100 GHz;
  • is optimized for use in compact antenna test ranges (CATR) or other chambers for OTA evaluations with a 30 cm quiet zone or larger;
  • has a half-head geometry compliant with SAM data as defined by IEEE, 3GPP, and CTIA and is available for right and left-hand usage, whereas the deviation to the full SAM head phantom is <0.2 dB for frequencies >6 GHz;
  • is light weight with only 2.5 kg.

The new mmW-½SAMR/L-V11 phantom packages are an advanced solution for passive and active OTA testing from 6 to >100 GHz.

To receive a quotation or for further information, please contact us at info@speag.swiss.

SIMULATION

27/09/2011

Contact
semx-support@speag.swiss

 

SEMCAD X in Microwave Engineering Europe Magazine

SEMCAD X: Enhanced Simulation of Waveguide Structures

 
SIMULATION

02/09/2011

Contact
semx-support@speag.swiss

 

SEMCAD X v14.6.2 Update Release

The SEMCAD X Team is pleased to announce the release of SEMCAD X v14.6.2, an update of SEMCAD X Aletsch v14.6.

 
SIMULATION

26/08/2011

Contact
semx-support@speag.swiss

 

SEMCAD X Light v14.6.2 Release

The SEMCAD X Team is pleased to announce the release of SEMCAD X Light V14.6.2, a limited version of SEMCAD X v14.6.2 Aletsch.

 
SIMULATION

21/07/2011

Contact
semx-support@speag.swiss

 

SEMCAD X v14.6.1 Release

The SEMCAD X Team is pleased to announce the release of SEMCAD X v14.6.1, an update of SEMCAD X Aletsch v14.6.

 
SIMULATION

29/06/2011

Contact
semx-support@speag.swiss

 

SEMCAD X Student Research Award 2010 Winners

Schmid & Partner Engineering AG (SPEAG) is very pleased to announce the winners of SEMCAD X Student Research Award 2010.

 
MEASUREMENT

20/06/2011

Contact
info@speag.swiss

 

iSAR Quad Release

iSAR Quad is officially released! iSAR Quad is the largest and highest-resolution iSAR available. iSAR Quad is well suited for scanning laptops, tablet computers and other large devices. It also improves the precision for SAR evaluations of devices operating above 3 GHz. We provide an upgrade option from iSAR Flat to iSAR Quad.

 
MEASUREMENT

25/05/2011

Contact
info@speag.swiss

 

DASY52 V6.2 and SEMCAD X V14.4.5 Software Release

The DASY team is pleased to announce the release of DASY52 V6.2 (482) and SEMCAD-X V14.4.5 (3634). We recommend the immediate installation of this upgrade as it addresses reported bugs and various minor requests/ suggestions by our customers.

 
SIMULATION

13/05/2011

Contact
semx-support@speag.swiss

 

Desmond Yeo Wins 1st Prize Engineering Poster at ISMRM 2011

Desmond Yeo, from GE Global Research, wins the 1st price in the Engineering Poster Session with poster #1811 using SEMCAD X:

INVESTIGATION OF A DUAL-FUNCTION APPLICATOR FOR RF HYPERTHERMIA AND MRI

 
SIMULATION

05/05/2011

Contact
semx-support@speag.swiss

 

SEMCAD X V14.6.0 Aletsch

The SEMCAD X Team is pleased to announce the release of SEMCAD X V14.6.0 Aletsch, a major upgrade offering a range of powerful new Modules and features, more robust handling as well as new customization options.

 
MEASUREMENT

22/04/2011

Contact
info@speag.swiss

 

Improved Broad-Band Liquids

SPEAG completed its development of greatly improved head and body tissue simulating liquids for the frequencies from 3500 to 5800 MHz. This new broad-band liquids are within ±5% to the target values and provide significantly improved long-time stability and reduction of the maintenance efforts. Therefore, they lower costs and improve reproducibility of the test results.

 
Page 24 of 29
 
 
Latest News