Swissmade
NEWS
29/07/2020
MEASUREMENT

mmWave ½SAM Phantoms Extend OTA Testing in CATR for 5G FR2 Devices

SPEAG’s two new mmWave ½SAM phantoms are optimized for testing mobile phone and other ear-mounted devices in talk mode at frequencies from 6 to >100 GHz and meet the quiet zone and weight restrictions of mmWave CATR and OTA chambers.

With the release of the new mmWave ½SAM right and left head phantoms, SPEAG is extending the frequency coverage from <0.3 – 6 GHz to 0.3 – >100 GHz, thus allowing its customers to perform reliable and repeatable over-the-air (OTA) performance evaluations of devices including 5G New Radio Frequency Range 2 and any other mmWave wireless operating systems. The mmW-½SAMR/L-V11 packages consist of the right or left head phantom, the mounting structure, a 6-degree positioning mask, and our universal talk-mode fixtures compatible with all of our talk-mode hands. Each package:

  • is fully compliant with the target values of current and future CTIA test plans and the reflection properties of the human skin for frequencies >100 GHz;
  • is optimized for use in compact antenna test ranges (CATR) or other chambers for OTA evaluations with a 30 cm quiet zone or larger;
  • has a half-head geometry compliant with SAM data as defined by IEEE, 3GPP, and CTIA and is available for right and left-hand usage, whereas the deviation to the full SAM head phantom is <0.2 dB for frequencies >6 GHz;
  • is light weight with only 2.5 kg.

The new mmW-½SAMR/L-V11 phantom packages are an advanced solution for passive and active OTA testing from 6 to >100 GHz.

To receive a quotation or for further information, please contact us at info@speag.swiss.

CORPORATE

08/11/2012

Contact
info@speag.swiss

 

Parents back to school: kids take over

On the 2012 National Future Day, four outstanding girls – Anushka, Chimey, Liza, and Sia, and four exceptional boys – Jechiel, Kilian, Moritz, and Arun joined our research and development teams at IT'IS, SPEAG and ZMT for one day.

 
MEASUREMENT

05/09/2012

Contact
info@speag.swiss

 

iSAR V2.6 Software Release

SPEAG is pleased to announce a new software release iSAR V2.6 that further improves repeatability, absolute accuracy and user friendliness of iSAR Flat, Head and Quad. In the next release, we also plan to include novel features that we are currently developing for cSAR3D.

 
SIMULATION

09/08/2012

Contact
semx-support@speag.swiss

 

SEMCAD X APS Raffle Winner

During the IEEE APS 2012 exhibition, a NVIDIA Tesla C1060 card was given away in a raffle at the SEMCAD X User Meeting.

 
MEASUREMENT

07/08/2012

Contact
info@speag.swiss

 

DASY52.8.2 and SEMCAD X V14.6.6 Software Release

SPEAG is pleased to announce the release of DASY52.8.2 (969) and SEMCAD-X V14.6.6 (6824). It took us slightly longer than promised for this release, however we not only removed the reported bugs but also added new features which will ease the daily usage of our DASY system as well as provide even better compatibility with current and upcoming compliance standards. In particular, we support our new MIF box, support the creation of SAR compliance reports and we improved the interface to the CMW500. In addition, the DAK team added two new videos to our webpage.

 
MEASUREMENT

02/08/2012

Contact
info@speag.swiss

 

New Phantom Products

In response to customer requests for more versatile phantoms, SPEAG introduces several new whole-body and hand phantoms.

 
CORPORATE

24/07/2012

Contact
info@speag.swiss

 

SPEAG sponsors "IT'IS for Health" with CHF 200 000

SPEAG Executive Board congratulates Niels Kuster, SPEAG Co-Founder and President of the Board of Directors, on receiving the distinguished d'Arsonval Award, the highest scientific honor of the Bioelectromagnetics Society.

 
MEASUREMENT

18/07/2012

Contact
info@speag.swiss

 

DAK Software Release

We are pleased to announce the latest DAK Software which is more flexible and versatile than the previous version.

 
SIMULATION

12/07/2012

Contact
semx-support@speag.swiss

 

SEMCAD X v14.8.1 Update Release

The SEMCAD X Team is pleased to announce the release of SEMCAD X v14.8.1, an update of SEMCAD X Aletsch v14.8.

 
MEASUREMENT

11/07/2012

Contact
info@speag.swiss

 

France Enforces SAR Requirements in Limbs

Recent information has been issued by the French government that wireless devices must comply with SAR limits in the limbs and hands. DASY52 is fully compatible with all testing requirements and international measurement standards. SAR phantoms and tissue equivalent liquids are available from SPEAG.

 
SIMULATION

26/06/2012

Contact
semx-support@speag.swiss

 

SEMCAD X Student Research Award 2011 Winners

Schmid & Partner Engineering AG (SPEAG) is very pleased to announce the winners of SEMCAD X Student Research Award 2011.

 
Page 22 of 29
 
 
Latest News